Knoll Islands 6TD00061 User manual

Islands Collection by Knoll
®Installation Instruction
Islands Collection by Knoll
®
October 19, 2020
Part Number: 6TD00061
Sheet 1
6td00061_1_hardware.ai
A
F G H
B C D E
HARDWARE LIST
6TD40139XX
MX3 SPINE
6TD40141XX
MX4 SPINE
6TD40174
SCR,FH,1/4-20X1
6TD4010201
SCR,T-F,FL,1/4-20X5/8
6TD4008901
SCR,1/4-20X1.5,T-F
6TD40033
GLIDE PAD
6TD40036
GLIDE
J K L M
N
GR S T
P
6TD40145XX
SPINE COVER
5122218
SCR,TRP#14x7/8
6TD40137
MX FOOT
6TD4000101
MX MOUNT
6TD40117B
CASTER W/ BRAKE
6TD40166
SCR,FLT,1/4-20X1.5, T-F
6TD40167
MX3 MOUNT PLATE
6TD40168
MX4 MOUNT PLATE
6TD40143XX
MX5 SPINE
6TD40169
MX5 MOUNT PLATE
6TD4006501
CABLE CLIP (OPTIONAL)
MX-Base Single Top Tables
Reference Number: 6TD00061
Tools Needed
Drill gun

Islands Collection by Knoll
®Installation Instruction
Islands Collection by Knoll
®
October 19, 2020
Part Number: 6TD00061
Sheet 2
6td00061_1.ai
MX-Base Single Top Tables
Reference Number: 6TD00061
STEPS:
1. Assembly of MX-base
(showing 4 feet base)
(Fig. 1)
1.1 Align the glide pad (F), to the one end
of foot (N), and secure into place using
2 (D) screws.
1.2 Assemble the caster (H), or leveller (G)
into the threaded hole of the foot (N).
1.3 Align and insert the tenon of
foot (N), into the one of the
opening of spine (K) for 4 feet
base, and secure into place using
4 (A) screws.
Note: Spine (J) for 3 feet base
Spine (L) for 5 feet base
Start all 4 fasteners (2-3 threads)
then follow Fig. 1A for tightening
sequence.
1.4 Repeat step 1.1, 1.2, 1.3 for
all 3 or 4 or 5 feet base.
1.5 Reorient the leg assembly so
that the glide pad is facing
downwards and the open end
is facing up.
1.6 Align and insert the tenon of mount (P),
into the one of the opening of spine (J) or
(K) or (L), and secure into place using 2
(B) screws.
Repeat for all 3 or 4 or 5 mounts.
Note:
For mount plate version, align plate (Q) or
(R) or (S) with spine (J) or (K) or (L), and
secure into place using 6 or 8 or 10 (E)
screws.
Criss-cross tightening sequence should
be used.
Fig. 1
Fig. 1A
M
K
T
A
A
B
E
R
P
N
G
F
D
H
1
3
2
4
MX Mount plate
for 4 feet base
MX Mount
Spine
for 4 feet base
Leveller
Caster
(Optional)

Islands Collection by Knoll
®Installation Instruction
Islands Collection by Knoll
®
October 19, 2020
Part Number: 6TD00061
Sheet 3
MX Conference Tables
Reference Number: 6TD00062
6td00061_2.ai
Fig. 2
C
C
T
Complete assembled table
with casters
2. Installation of assembled MX-base
with worksurface
( Fig. 2)
2.1 Lay worksurface upside down on a soft
non scratching surface, round
worksurface shown for example.
2.2 Center and align holes of mount (P) of
assembled leg over the provided pilot
holes and attach using 12 or 16 or 20 (C)
screws.
Note:
For mount plate version, center and align
holes of mount plate (Q) or (R) or (S) of
assembled leg over the provided pilot
holes and attach using 8 (C) screws.
Criss-cross tightening sequence should
be used.
3. Installation of cable clip (T)
(Optional)
(Fig. 2)
3.1 First, insert one side of cable clip (T),
into grove of spine (J) or (K) or (L), then
take a long object (similar to pen) and
push in the other side.
R
P
MX Mount plate
for 4 feet base
MX Mount
Cable clip
(Optional)