Kohler Joure 14682-4 User manual

All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove any debris.
2. Do not remove the plaster guard from the valve body until instructed to.
3. Install valve 880 according to the rough-in dimensions of 14683-4, Install valve 882 according to the
rough-in dimensions of 14682-4.
1114995-2A-C 1
14682-4 SINGLE LEVER RECESSED BATH & SHOWER TRIM
14683-4 SINGLE LEVER RECESSED SHOWER ONLY TRIM
BEFORE YOU BEGIN
HANDLE OPERATION
INSTALLATION INSTRUCTIONS
Single Lever Recessed Trim
ROUGH-IN DIMENSIONS
Lift the handle gently. Turn clockwise for hot water, counter-clockwise for cold water.
53
162X162
80
107
32~42
or 40~49
MIN107
65
The finished wall
53
162X162
32~42
or 40~49
MIN107
The finished wall
14682-4 14683-4
80
107

1114995-2A-C 2
NOTE: Install valve 880 according to the rough-in dimensions of
14683-4, Install valve 882 according to the rough-in dimensions of
14682-4.
Remove the plastic guard(1) after completed the finished wall.
Slide the cover kit(4) onto the valve(3) with the plugs(13) facing
outside(NOTE: Don't squeeze out the rubber rings12,14). Push it
against the wall. Secure it with the screws(15). Put the faceplate(5)
onto the cover kit with slots(6) downwards. Push it against the wall.
According to the length of the valve extending from the finished wall,
select the sleeve(7) or extension sleeve(8). Screw the bonnet(9) on
the valve.
Install handle(10): Tighten the setscrew(11) with hex wrench(16).
Press plug button(17) into the hole.
The illustration shown is the correct position of the handle in the off
position.
INSTALLATION
1114995-2A-C 3
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean
soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
1
7
3
16
10
17
6
458
9
11
12
13
14
15
SERVICE PARTS
**Color code must be specified when ordering
Single Lever Recessed Trim
14682-4 SINGLE LEVER RECESSED BATH & SHOWER TRIM
14683-4 SINGLE LEVER RECESSED SHOWER ONLY TRIM
1109688**
Faceplate
(Only for 14682-4)
3007136
Cover Kit
(Only for 14683-4)
3010602
Screw
3007134
Cover Kit
(Only for 14682-4)
3010602
Screw
1111508**
Faceplate
(Only for 14683-4)
1109687**
Handle
833438
Screw
833730
Hex Wrench
834705**
Plug
3006927**
Bonnet
3006902
Ring
3006903
Ring
(Only for 14682-4)
3006902
Ring
1109689**
Sleeve
1115725**
Extension Sleeve
2