Kohler K-36979T User manual

, 2013
Copyright Kohler China Ltd., 2013
MEMOIRS
SINGULIER
INSTALLATION INSTRUCTIONS
8mm
HINGED-W, SCREEN, 1DR1PAN, 8mm
K-36979T/K-36981T
10mm
HINGED-W, SCREEN, 1DR1PAN, 10mm
K-36980T/K-36982T
-1-
13-1 528437
·
·
·
·
·
·
2
80mm
3mm/m
·
·
·
·
·
·
Before you install your shower door, please read
these instructions carefully to familiarize yourself
with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information is based on the latest product
information available at the time of publication.
Kohler China Ltd. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning,
and warranty information-
Make sure that the bath and the finished wall
material are completely and correctly installed prior
to installing your shower door. Prepare waterproof
layer to wall and floor of the showering area. It is not
allowed for any presence of electric switches and
sockets. Make sure the floor drain runs smoothly.
Before starting the door installation, lay out and
identify all the parts. Use the exploded view
illustrated on page 2 for reference.
For the installation method of customized shower
with different dimensions, please refer to this
instructions.
Tempered glass cannot be cut, drilled or
knocked by hard object. Make sure corner area
of the glass refraining from knocking so as to
cause personal injury due to broken glass.
Please install this door on Kohler
receptors or curbs (Not included). If the curb is not
Kohler-branded, please note its top width should fall
above 80mm.
The shower door requires a flat vertical
finished wall. The squareness of the wall is
recommended no more than 3 mm/m. KOHLER
Company won't take responsibility of the installation
quality.
please leave these
instructions for the consumer.
CAUTION: Risk of injury or product damage.
ATTENTION:
IMPORTANT:
1172435-T01-B

-2-
ROUGHING-IN
Unit: mm
BHSKU
H
B
K-36979T
K-36981T
K-36980T
K-36982T
700-1600 1850-2000
PARTS IDENTIFICATIONPARTS IDENTIFICATION
K-36979T/K-36981T
MEMOIRS Bracket Assy
X2
MEMOIRS Handle Assy
MEMOIRS Wall Clip Assy
X2
MEMOIRS 90 DEG Hinge Assy
90 X2
MEMOIRS Bottom Clip Assy
X1
MEMOIRS Wall Clip Body Cover
X2
Frame Cap LH
()X1 Frame Cap LH
()X1
Frame End Cap RH
()X1
Frame End Cap RH
()X1
Frame End Cap LH
()X1 Frame End Cap LH
()X1
Frame Cap RH
()X1
Frame Cap RH
()X1
Special Key
X1
Cover
X8
4mm Allen Key
4mm
X5
X5
X2
Hinge Cover
X10
SINGULIER Bracket Assy
X2
SINGULIER Handle Assy
SINGULIER Wall Clip Assy
X2
SINGULIER 90 DEG Hinge Assy
90 X2
SINGULIER Bottom Clip Assy
X1
SINGULIER Wall Clip Body Cover
X2
Special Key
X1
Cover
X8
4mm Allen Key
4mm
X5
X5
X2
Hinge Cover
X10
K-36980T/K-36982T
1172435-T01-B

-3-
STEP
1
Fix the gasket to the glass.
STEP
2
Affix the wall clip to the glass ,screws not locked.
Note: Please
insert the glass
in the correct
direction.
INSTALLATION
STEP
3
Fix the wall clip and the floor clip.
6mm
6mm
1172435-T01-B

STEP
5
STEP
4
Align the glass to level, and lock the wall clip and the
floor clip.
Affix the top and bottom hinges to the door glass.
Block up the door glass, line with the glass, then fix
the door glass.
STEP
6
-4-
6mm
STEP
7
Fix the handle.
1172435-T01-B

-5-
STEP
9
Install bottom frame channel and cap.
STEP
8
Fix the bottom gasket.
STEP
10
Fix the magnetic stripe and the
gasket.
STEP
11
If the door opens unwell, please loosen the wall clip
and the floor clip slightly, adjust the glass until the
door closed completely, then lock the screws.
1172435-T01-B

-6-
STEP
13
Fix the tierod.
STEP
12
Fix the cover caps to the wall
clips.
0mm
STEP
14
Fix the cover caps to the hinges.
STEP
15
Affix the anchor to the inner handle.
Skip this step if the door
opens outward.
1172435-T01-B

-7-
STEP
16
STEP
17
Do not use the enclosure for at least 24 hours.
24
24hrs
Fix the bottom of the glass and use the water-
resistant gel.
1172435-T01-B