Kontron CPS3003-SA User manual

D R A F T — F O R I N T E R N A L U S E O N L Y
The pulse of innovation
» User Guide «
CPS3003-SA
Doc. ID: 1054-3213, Rev. 2.0
Date: February 10, 2014

D R A F T — F O R I N T E R N A L U S E O N L Y
2
www.kontron.com
User Guide
CPS3003-SA
Revision History
Imprint
Kontron Europe GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Europe GmbH +49 (0) 800-SALESKONTRON
Sudetenstraße 7 [email protected]
D - 87600 Kaufbeuren Germany
For further information concerning other Kontron products, please visit our Internet website:
www.kontron.com.
Disclaimer
Copyright © 2013-2014 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to be accu-
rate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all oth-
er trademarks or registered trademarks are the property of their respective owners and are recognized.
Specifications are subject to change without notice.
Revision Brief Description of Changes Date of Issue
1.0 Initial issue 13-May-2014
2.0 Extensive changes 10-Feb-2014

D R A F T — F O R I N T E R N A L U S E O N L Y
3
www.kontron.com
User Guide
CPS3003-SA
Contents
Revision History ..........................................................................................................2
Imprint .....................................................................................................................2
Disclaimer ..................................................................................................................2
Contents ....................................................................................................................3
Tables .......................................................................................................................7
Figures ......................................................................................................................8
Warranty ....................................................................................................................9
Proprietary Note ..........................................................................................................9
Trademarks ................................................................................................................9
Environmental Protection Statement ................................................................................9
1 Introduction ...................................................................................... 10
1.1 Board Overview .......................................................................................... 10
1.2 System Expansion Capabilities ....................................................................... 11
1.2.1 CPS3003-EXTIO Extension Module (8 HP) .......................................................... 11
1.2.2 CPS3003-BRIDGE Extension Module (9 HP)........................................................ 11
1.2.3 CPS-RIO3-01 Rear Transition Module ............................................................... 11
1.2.4 Smart Extension Module ............................................................................... 11
1.2.5 SATA Flash Module ...................................................................................... 11
1.3 Board Diagrams.......................................................................................... 11
1.3.1 Functional Block Diagram ............................................................................. 12
1.3.2 Front Panel ............................................................................................... 13
1.3.3 Board Layout ............................................................................................. 14
1.4 Technical Specification ................................................................................ 15
1.5 Standards ................................................................................................. 18
1.6 Related Publications.................................................................................... 19
2 Functional Description ......................................................................... 20
2.1 Processor and Chipset.................................................................................. 20
2.1.1 Integrated Processor Graphics Controller ......................................................... 20
2.2 Memory .................................................................................................... 20
2.3 Watchdog Timer.......................................................................................... 21
2.4 Battery..................................................................................................... 21
2.5 Flash Memory............................................................................................. 21
2.5.1 SPI Boot Flash for uEFI BIOS.......................................................................... 21
2.5.2 SATA Flash Module ...................................................................................... 21
2.6 Trusted Platform Module 1.2.......................................................................... 22
2.7 Board Interfaces......................................................................................... 22
2.7.1 Front Panel LEDs......................................................................................... 22
2.7.1.1 System Status LEDs ..................................................................................... 22

D R A F T — F O R I N T E R N A L U S E O N L Y
4
www.kontron.com
User Guide
CPS3003-SA
2.7.1.2 General Purpose LEDs .................................................................................. 22
2.7.2 USB Interfaces ........................................................................................... 24
2.7.3 DisplayPort Interfaces ................................................................................. 24
2.7.4 Serial Ports ............................................................................................... 24
2.7.5 Gigabit Ethernet ......................................................................................... 24
2.7.6 SATA Interfaces .......................................................................................... 25
2.7.7 CompactPCI Serial Interface .......................................................................... 25
2.7.7.1 CompactPCI Serial Connectors P1 to P5 ............................................................ 26
2.7.7.2 CompactPCI Serial Connector P6 ..................................................................... 28
3 Configuration..................................................................................... 31
3.1 DIP Switch Configuration.............................................................................. 31
3.2 System Write Protection ............................................................................... 31
3.3 CPS3003-SA-Specific Registers ...................................................................... 32
3.3.1 Write Protection Register (WPROT).................................................................. 32
3.3.2 Reset Status Register (RSTAT)........................................................................ 33
3.3.3 Watchdog Timer Control Register (WTIM) ......................................................... 34
3.3.4 LED Configuration Register (LCFG) .................................................................. 35
3.3.5 LED Control Register (LCTRL) ......................................................................... 35
3.3.6 General Purpose Output Register (GPOUT)......................................................... 36
3.3.7 General Purpose Input Register (GPIN) ............................................................ 36
4 Power Considerations .......................................................................... 37
4.1 CPS3003-SA Voltage Ranges .......................................................................... 37
4.2 Power Consumption..................................................................................... 37
5 Thermal Considerations ........................................................................ 39
5.1 Operational Limits for the CPS3003-SA ............................................................ 40
5.2 Airflow Impedance ...................................................................................... 41
6 CPS3003-EXTIO Extension Module ........................................................... 42
6.1 Overview................................................................................................... 42
6.2 Technical Specifications ............................................................................... 42
6.3 CPS3003-EXTIO Module Functional Block Diagram............................................... 43
6.4 Front Panel of the CPS3003-SA with CPS3003-EXTIO Module.................................. 44
6.5 CPS3003-EXTIO Module Board Layout............................................................... 44
6.6 Module Interfaces (Front Panel and Onboard).................................................... 45
6.6.1 USB Interface ............................................................................................ 45
6.6.2 Serial Port................................................................................................. 45
6.6.3 CFast Card Socket........................................................................................ 45
7 CPS3003-BRIDGE Extension Module ........................................................ 46
7.1 Overview................................................................................................... 46
7.2 Technical Specifications ............................................................................... 46
7.3 CPS3003-BRIDGE Module Functional Block Diagram ............................................ 47

D R A F T — F O R I N T E R N A L U S E O N L Y
5
www.kontron.com
User Guide
CPS3003-SA
7.4 Front Panel of the CPS3003-SA with CPS3003-BRIDGE Module ............................... 48
7.5 CPS3003-BRIDGE Module Board Layout ............................................................ 48
7.6 Module Interfaces (Front Panel and Onboard).................................................... 49
7.6.1 USB Interface ............................................................................................ 49
7.6.2 Serial Port................................................................................................. 49
7.6.3 CFast Card Socket........................................................................................ 49
7.6.4 CompactPCI Interfaces ................................................................................. 49
7.6.5 CompactPCI Connector Keying ....................................................................... 49
8 CPS-RIO3-01 Rear Transition Module ....................................................... 50
8.1 Overview................................................................................................... 50
8.2 Technical Specifications ............................................................................... 50
8.3 CPS-RIO3-01 Module Functional Block Diagram.................................................. 51
8.4 CPS-RIO3-01 Rear Transition Module Layout...................................................... 52
8.5 Module Interfaces ....................................................................................... 53
8.5.1 USB Interfaces ........................................................................................... 53
8.5.2 DisplayPort Interface................................................................................... 53
8.5.3 Gigabit Ethernet Interface ............................................................................ 53
8.5.4 COM Interface ............................................................................................ 53
8.5.5 Rear I/O Interface on CompactPCI Serial Connector - rJ6...................................... 53
8.5.6 System Write Protection ............................................................................... 53
8.5.7 Jumper J1................................................................................................. 53
9 Smart Extension Module ....................................................................... 54
9.1 Overview................................................................................................... 54
9.2 Technical Specifications ............................................................................... 54
9.3 Smart Extension Module Layout ..................................................................... 54
9.4 Module Interfaces ....................................................................................... 54
9.4.1 USB Interface ............................................................................................ 54
9.4.2 SATA Interface ........................................................................................... 54
10 SATA Flash Module............................................................................... 55
10.1 Overview................................................................................................... 55
10.2 Technical Specifications ............................................................................... 55
10.3 SATA Flash Module Layout............................................................................. 56
11 Installation ....................................................................................... 57
11.1 Safety ...................................................................................................... 57
11.2 General Instructions on Usage ....................................................................... 57
11.3 Board Installation ...................................................................................... 57
11.3.1 Hot Swap Insertion ..................................................................................... 58
11.3.2 Hot Swap Removal ...................................................................................... 58
11.4 CFast Card Installation ................................................................................. 59
11.5 Rear Transition Module Installation ................................................................ 59
11.6 Battery Replacement ................................................................................... 59

D R A F T — F O R I N T E R N A L U S E O N L Y
6
www.kontron.com
User Guide
CPS3003-SA
12 uEFI BIOS .......................................................................................... 60
12.1 Starting the uEFI BIOS ................................................................................. 60
12.2 Setup Menus.............................................................................................. 61
12.2.1 Main Menu ................................................................................................ 61
12.2.2 Boot Menu ................................................................................................ 63
12.2.3 Security Menu ............................................................................................ 64
12.2.3.1 Modes of Security ....................................................................................... 65
12.2.3.2 Remember the Password ............................................................................... 65
12.2.4 Save and Exit Menu ..................................................................................... 65
12.3 The uEFI Shell ............................................................................................ 67
12.3.1 Introduction, Basic Operation ....................................................................... 67
12.3.1.1 Entering the uEFI Shell ................................................................................ 67
12.3.1.2 Exiting the uEFI Shell .................................................................................. 67
12.3.2 Kontron-Specific uEFI Shell Commands ............................................................ 68
12.4 uEFI Shell Scripting..................................................................................... 69
12.4.1 Startup Scripting ........................................................................................ 69
12.4.2 Create a Startup Script ................................................................................. 69
12.4.3 Examples of Startup Scripts........................................................................... 70
12.4.3.1 Automatic Booting from USB Flash Drive .......................................................... 70
12.4.3.2 Execute Shell Script on Other Harddrive ........................................................... 70
12.4.3.3 Enable Watchdog and Control PXE Boot ............................................................ 70
12.4.3.4 Handling the Startup Script in the SPI Boot Flash ............................................... 71
12.5 Updating the uEFI BIOS................................................................................ 72
12.5.1 Updating Procedure .................................................................................... 72
12.5.2 uEFI BIOS Recovery ..................................................................................... 72
12.5.3 Determining the Active Flash ......................................................................... 72

D R A F T — F O R I N T E R N A L U S E O N L Y
7
www.kontron.com
User Guide
CPS3003-SA
Tables
1 CPS3003-SA Main Specifications ............................................................................ 15
2 Standards ........................................................................................................ 18
3 Additional Standards for Boards Ordered with Ruggedized Service ................................. 19
4 Related Publications ........................................................................................... 19
5 Features of the Processors Supported on the CPS3003-SA ............................................ 20
6 System Status LEDs Function ................................................................................ 22
7 General Purpose LEDs Function ............................................................................. 23
8 POST Code Sequence ........................................................................................... 23
9 POST Code Example ............................................................................................. 23
10 Legend for CompactPCI Serial Connectors P1 to P5 ..................................................... 26
11 Pinout for CompactPCI Serial Connector P1 .............................................................. 27
12 Pinout for CompactPCI Serial Connector P2 .............................................................. 27
13 Pinout for CompactPCI Serial Connector P3 .............................................................. 27
14 Pinout for CompactPCI Serial Connector P4 .............................................................. 28
15 Pinout for CompactPCI Serial Connector P5 .............................................................. 28
16 Legend for CompactPCI Serial Connector P6 ............................................................. 28
17 Pinout for CompactPCI Serial Connector P6 .............................................................. 29
18 GPIO_CFG# Signal Description ............................................................................... 30
19 SYS_WP# Signal Description ................................................................................. 30
20 DIP Switch SW1 Functionality ................................................................................ 31
21 CPS3003-SA-Specific Registers .............................................................................. 32
22 Write Protection Register (WPROT) ......................................................................... 32
23 Reset Status Register (RSTAT) ............................................................................... 33
24 Watchdog Timer Control Register (WTIM) ................................................................. 34
25 LED Configuration Register (LCFG) ......................................................................... 35
26 LED Control Register (LCTRL) ................................................................................ 35
27 General Purpose Output Register (GPOUT) ................................................................ 36
28 General Purpose Input Register (GPIN) .................................................................... 36
29 DC Operational Input Voltage Range ....................................................................... 37
30 CPS3003-SA Power Consumption ............................................................................ 38
31 Power Consumption of CPS3003-SA Accessories ......................................................... 38
32 CPS3003-EXTIO Module Specifications ..................................................................... 42
33 Serial Port Connector J3 Pinout ............................................................................. 45
34 CPS3003-BRIDGE Module Specifications .................................................................. 46
35 Serial Port Connector J3 Pinout ............................................................................. 49
36 CPS-RIO3-01 Rear Transition Module Specifications ................................................... 50
37 Serial Port Connectors J7 (COMB) and J8 (COMA) Pinout ............................................. 53
38 Smart Extension Module Specifications ................................................................... 54
39 SATA Flash Module Specifications .......................................................................... 55
40 Navigation ....................................................................................................... 60
41 Main Menu Sub-Screens and Functions .................................................................... 61
42 Boot Menu Functions .......................................................................................... 63
43 Security Menu Functions ...................................................................................... 64
44 Modes of Security ............................................................................................... 65
45 Save and Exit Menu Functions ............................................................................... 65
46 Kontron-Specific uEFI Shell Commands ................................................................... 68

D R A F T — F O R I N T E R N A L U S E O N L Y
8
www.kontron.com
User Guide
CPS3003-SA
Figures
1 CPS3003-SA Functional Block Diagram ................................................................... 12
2 4 HP CPS3003-SA Front Panel ............................................................................... 13
3 4 HP CPS3003-SA Board Layout (Top View) .............................................................. 14
4 4 HP CPS3003-SA Board Layout (Bottom View) ......................................................... 14
5 CompactPCI Serial Connectors P1 to P6 .................................................................. 25
6 DIP Switch SW1 ................................................................................................ 31
7 CPS3003-SA with i7-3612QE (SV), 2.1 GHz .............................................................. 40
8 CPS3003-SA with i7-3555LE (LV), 2.5 GHz ............................................................... 40
9 CPS3003-SA with i7-3517UE (ULV), 1.7 GHz ............................................................ 41
10 CPS3003-SA Airflow Impedance ............................................................................ 41
11 CPS3003-EXTIO Module Functional Block Diagram ..................................................... 43
12 Front Panel of the 8 HP CPS3003-SA with CPS3003-EXTIO Module ................................. 44
13 CPS3003-EXTIO Module Board Layout (Top View) ...................................................... 44
14 Serial Port Connector J3 ..................................................................................... 45
15 CPS3003-BRIDGE Module Functional Block Diagram .................................................. 47
16 Front Panel of the 9 HP CPS3003-SA with CPS3003-BRIDGE Module ............................... 48
17 CPS3003-EXTIO Module Board Layout (Top View) ...................................................... 48
18 Serial Port Connector J3 ..................................................................................... 49
19 CPS-RIO3-01 Module Functional Block Diagram ........................................................ 51
20 CPS-RIO3-01 Rear Transition Module Layout ............................................................ 52
21 Smart Extension Module Layout (Top View) ............................................................. 54
22 SATA Flash Module Layout (Top and Bottom Views) ................................................... 56

D R A F T — F O R I N T E R N A L U S E O N L Y
9
www.kontron.com
User Guide
CPS3003-SA
Warranty
This Kontron product is warranted against defects in material and workmanship for the warranty period
from the date of shipment. During the warranty period, Kontron will at its discretion decide to repair
or replace defective products.
Within the warranty period, the repair of products is free of charge as long as warranty conditions are
observed.
The warranty does not apply to defects resulting from improper or inadequate maintenance or handling
by the buyer, unauthorized modification or misuse, operation outside of the product’s environmental
specifications or improper installation or maintenance.
Kontron will not be responsible for any defects or damages to other products not supplied by Kontron
that are caused by a faulty Kontron product.
Proprietary Note
This document contains information proprietary to Kontron. It may not be copied or transmitted by any
means, disclosed to others, or stored in any retrieval system or media without the prior written consent
of Kontron or one of its authorized agents.
The information contained in this document is, to the best of our knowledge, entirely correct. Howev-
er, Kontron cannot accept liability for any inaccuracies or the consequences thereof, or for any liability
arising from the use or application of any circuit, product, or example shown in this document.
Kontron reserves the right to change, modify, or improve this document or the product described here-
in, as seen fit by Kontron without further notice.
Trademarks
This document may include names, company logos and trademarks, which are registered trademarks
and, therefore, proprietary to their respective owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where possible.
Many of the components used (structural parts, printed circuit boards, connectors, batteries, etc.) are
capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with appli-
cable country, state, or local laws or regulations.

D R A F T — F O R I N T E R N A L U S E O N L Y
10
www.kontron.com
User Guide
CPS3003-SA
1 Introduction
1.1 Board Overview
CompactPCI® Serial, adopted by the PICMG® consortium in 2011, describes a new base standard. The
CompactPCI Serial standard introduces a completely new connector that enables a higher signal den-
sity and supports even higher transmission frequencies of up to 12 Gb/s as well as modern point-to-
point connections such as PCI Express®, SATA, Ethernet and USB on the backplane.
The CPS3003-SA is a highly integrated 3U CompactPCI Serial CPU board based on Intel®'s 3rd Genera-
tion Core™ i7 technology in combination with the mobile Intel® QM77 Express Chipset. The CPU board
comes with a multi-core CPU package scalable from the dual-core ULV 1.7 GHz Intel® Core™ i7-3517UE
up to the quad-core 2.1 GHz i7-3612QE processor. The powerful PCH Intel® QM77 provides a variety of
interfaces either routed to front, onboard or the CompactPCI Serial connectors. Memory-demanding
applications can make use of up to 16 GB, 1600 MHz DDR3 SDRAM with Error Checking and Correction
(ECC). As another security feature, the CPS3003-SA provides a Trusted Platform Module (TPM) which
offers hardware-based encryption mechanisms to create, seal or store keys and other important system
data.
For graphics intensive applications, the CPS3003-SA offers an excellent graphics performance with in-
tegrated DirectX®11, OpenGL 3.1 and OpenCL 1.1 support as well as three independent graphics out-
puts.
The CPS3003-SA comes with a comprehensive I/O feature set supporting the latest high-speed inter-
faces such as USB 3.0, SATA 6Gb/s or PCI Express® 3.0. Communication interfaces available on the
front panel are two DisplayPort, two USB 2.0 and two Gigabit Ethernet ports. Serial interfaces available
on the CompactPCI Serial connectors P1 to P5 are eight USB ports, four SATA interfaces and 17x PCI
Express® links. Additional interfaces available on the P6 CompactPCI Serial rear I/O connector are two
Gigabit Ethernet interfaces, two USB ports, one DisplayPort and two serial ports.
By adding one of the four extension modules – Smart Extension Module, SATA Flash Module, CPS3003-
EXTIO or CPS3003-BRIDGE - the CPS3003-SA’s I/O and storage capabilities will be further extended.
The board is offered with various Board Support Packages including Windows, VxWorks and Linux op-
erating systems. For further information concerning the operating systems available for the CP3003-
SA, please contact Kontron.

D R A F T — F O R I N T E R N A L U S E O N L Y
11
www.kontron.com
User Guide
CPS3003-SA
1.2 System Expansion Capabilities
1.2.1 CPS3003-EXTIO Extension Module (8 HP)
The CPS3003-EXTIO module for the 8 HP CPS3003-SA version provides one USB 3.0 port, one COM port,
and one CFast socket on the front panel. For further information on the CPS3003-EXTIO extension mod-
ule, refer to Chapter 6.
1.2.2 CPS3003-BRIDGE Extension Module (9 HP)
The CPS3003-BRIDGE module for the 9 HP CPS3003-SA version provides one USB 3.0 port, one COM
port, and one CFast socket on the front panel. In addition, the CPS3003-BRIDGE module is equipped
with a PCI Express-to-PCI bridge which converts PCI Express signals into PCI signals and makes them
available on the CompactPCI interface. For further information on the CPS3003-BRIDGE extension
module, refer to Chapter 7.
1.2.3 CPS-RIO3-01 Rear Transition Module
The CPS-RIO3-01 rear transition module provides comprehensive rear I/O functionality, such as one
DisplayPort, two COM ports, two Gigabit Ethernet ports, one USB 3.0 port, and one USB 2.0 port. For
further information on the CPS-RIO3-01 rear transition module, refer to Chapter 8.
1.2.4 Smart Extension Module
The Smart Extension Module can be used with the 4 HP CPS3003-SA and expands the onboard I/O ca-
pability providing one additional SATA cable connector as well as one USB 2.0 connector thereby facil-
itating the connection to system-internal USB and SATA devices. For further information on the Smart
Extension Module, refer to Chapter 9.
Note: If a Smart Extension Module is installed on the CPS3003-SA, the board width exceeds 4 HP.
1.2.5 SATA Flash Module
The SATA Flash module can be used with the 4 HP CPS3003-SA and provides up to 32 GB of SLC NAND
flash memory. For further information on the SATA Flash module, refer to Chapter 10.
1.3 Board Diagrams
The following diagrams provide additional information concerning board functionality and component
layout.

D R A F T — F O R I N T E R N A L U S E O N L Y
12
www.kontron.com
User Guide
CPS3003-SA
1.3.1 Functional Block Diagram
Figure 1: CPS3003-SA Functional Block Diagram
DDR3 SDRAM
SODIMM with ECC
COM1-2, GPIO
Mobile Intel®
QM77
Express Chipset
4x
POST /
DEBUG /
GP /
Debug
12V
3rd Gen.
Intel® Core™ i7
Processor
DDR3 DDR3
DMI
USB 2.0
LPC
SATA
USB 2.0
type-A
PCIe
FDI
USB 2.0
4x SATA
TPM
USB 2.0
type-A
DP B
6x USB 2.0 GbE B
PCIe
x1
High-
Speed
I/O
Extension
Connector
x1 2x USB 2.0
DP
GbE A
Watchdog 3.3/5V USB Power
Rear I/O Eth
SFF-XDP
SATA Flash
module
PCIe PCIe 3.0 x4
5x PCIe 2.0 x1
PCIe PCIe 3.0 x8
USB 3.0 2x USB 3.0 / 2.0 USB 2.0 USB 3.0
Rear I/O Eth
1x USB 3.0 / 2.0 1x USB 2.0 1x DisplayPort
P6 Rear I/O
DP
Power Fat Pipe I/O
DP A
Dual
UART
DDR3 SDRAM
SODIMM with ECC
CompactPCI
Serial
Front
RJ-45 + Mag.
Intel®
I210-IT
Intel®
I210-IT
GbE
Switch
GbE
Switch
Rear I/O Eth Rear I/O Eth
2x DisplayPort 2x GbE 2x USB
LEDs
MAG MAG
Hot Swap Handle Power Button Func.
Hot Swap Onboard Power Supplies
Thermal
RJ-45 + Mag.
CPLD
2x DP
SATA USB 3.0 PCIe
Rear I/O
SATA
Rear I/O
PCIe
SPI
SPI Boot
Flashes
(standard/
recovery)
RTC
Battery
3V
optional

D R A F T — F O R I N T E R N A L U S E O N L Y
13
www.kontron.com
User Guide
CPS3003-SA
1.3.2 Front Panel
Figure 2: 4 HP CPS3003-SA Front Panel
Note: For information regarding the front panel of the 8 HP CPS3003-SA with a CPS3003-EXTIO
extension module, refer to Chapter 6.
For information regarding the front panel of the 9 HP CPS3003-SA with a CPS3003-BRIDGE
extension module, refer to Chapter 7.
CPS3003
DP-B
HSTHWD
DP-A
0
1
2
3USB
SPEED
ACT
SPEED
ACT
System Status LEDs
HS (blue): Hot Swap Status
TH (red/green): Temperature Status
WD (green): Watchdog Status
General Purpose LEDs
LED3..0 (red/green/red+green): General Purpose/ POST Code
Note: If the General Purpose LEDs 3..0 are lit red during boot-up,
a failure is indicated before the uEFI BIOS has started.
Integral Ethernet LEDs
ACT (green): Ethernet Link/Activity
SPEED (orange): 1000BASE-T Ethernet Speed
SPEED (green): 100BASE-TX Ethernet Speed
SPEED (off) + ACT on: 10BASE-T Ethernet Speed

D R A F T — F O R I N T E R N A L U S E O N L Y
14
www.kontron.com
User Guide
CPS3003-SA
1.3.3 Board Layout
Figure 3: 4 HP CPS3003-SA Board Layout (Top View)
Figure 4: 4 HP CPS3003-SA Board Layout (Bottom View)
P1
P5
P4
P3
P2
P6
Intel® Core™ i7
Intel® QM77
Battery
J11A
J7
J8
J9
J10
SATA Flash
Module
Smart Extension
Module
J16
J11B
HS LED
ON
1234
SW1
TH LED
WD LED
LED0
LED1
LED2
LED3

D R A F T — F O R I N T E R N A L U S E O N L Y
15
www.kontron.com
User Guide
CPS3003-SA
1.4 Technical Specification
Table 1: CPS3003-SA Main Specifications
FEATURES SPECIFICATIONS
Processor & Chipset
CPU The CPS3003-SA supports the following 3rd generation processors:
» Quad-core Intel® Core™ i7-3612QE (SV), 2.1 GHz, 6 MB L3 cache
» Dual-core Intel® Core™ i7-3555LE (LV), 2.5 GHz, 4 MB L3 cache
» Dual-core Intel® Core™ i7-3517UE (ULV), 1.7 GHz, 4 MB L3 cache
Graphics Controller High-performance 3D graphics controller integrated in the processor
PCH Mobile Intel® QM77 Express Chipset
Memory
Main Memory Up to 16 GB, dual-channel DDR3 SDRAM memory with ECC running at 1600 MHz on
two SODIMM sockets
Flash Memory Two 8 MB SPI boot flash chips for two separate uEFI BIOS images
Up to 32 GB SLC NAND flash via an onboard SATA Flash module (SSD)
EEPROM EEPROM with 64 kbit
Interfaces
CompactPCI Serial CompactPCI Serial interface:
» Compliant with PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specification
» Support for the following interfaces:
» 7x PCI Express® (1 x8 PCI Express 3.0 on fat pipe, 1 x4 PCI Express 3.0 on
fat pipe and 5 x1 PCI Express 2.0)
» 4 x SATA (2 x SATA 6 Gb/s, 2 x SATA 3 Gb/s)
» 2 x USB 3.0 / 2.0
»6xUSB2.0
» 2 x Gigabit Ethernet
» 12 V power supply
» Hot swap capability
» Capability of operation both in system slot and in peripheral slot
When installed in a peripheral slot, all interfaces except for the Ethernet
interfaces and rear I/O interfaces are isolated from the CompactPCI Serial
interface.
CompactPCI Serial
Rear I/O
The following interfaces are routed to the CompactPCI Serial rear I/O connector P6:
» COMA and COMB, or COMA and GPIO (all ports have 3.3V LVTTL signaling)
»1xUSB2.0
» 1 x USB 3.0 / 2.0
»DisplayPort
» 2x Gigabit Ethernet
» System control signals
» Input for RTC backup
Gigabit Ethernet Two 10 Base-T/100 Base-TX/1000 Base-T Gigabit Ethernet interfaces based on two
Intel® I210-IT Ethernet controllers. Both interfaces are individually switchable to
front I/O or rear I/O and provide Wake-on-LAN support.

D R A F T — F O R I N T E R N A L U S E O N L Y
16
www.kontron.com
User Guide
CPS3003-SA
Interfaces
USB Up to 13 USB ports:
» 6 x USB 2.0 on the CompactPCI Serial interface
» 2 x USB 3.0 / 2.0 on the CompactPCI Serial interface
» 2 x USB 2.0 ports on the front I/O
» 1 x USB 2.0 port on the rear I/O interface
» 1 x USB 3.0 / 2.0 port on the rear I/O interface
» 1 x USB 3.0 / 2.0 port on the CPS3003-EXTIO/CPS3003-BRIDGE extension
module
Serial Two 16C550-compatible UARTs:
» COMA available on the CPS3003-EXTIO/CPS3003-BRIDGE extension module or
on rear I/O
» COMB or GPIO available on the rear I/O only
SATA Six SATA ports:
» 2 x SATA 3 Gb/s onboard
» 2 x SATA 6 Gb/s on the CompactPCI Serial interface
» 2 x SATA 3 Gb/s on the CompactPCI Serial interface
High-performance RAID 0/1/5/10 functionality on all SATA ports
I/O Extension
Interfaces
I/O extension to 8 HP board version via the CPS3003-EXTIO module:
» CFast (SATA 3 Gb/s)
»USB3.0
» COMA (RS-232)
»Resetbutton
» SATA activity LED
I/O extension to 9 HP board version via the CPS3003-BRIDGE module:
» CFast (SATA 3 Gb/s)
»USB3.0
» COMA (RS-232)
»Resetbutton
» SATA activity LED
» CompactPCI interface
I/O extension of CPS3003-SA via the Smart Extension Module:
» SATA 3 Gb/s
»USB2.0
» When installed 4HP width is exceeded
Sockets
Front Panel Connectors DP: two DisplayPort connectors, J7 and J8
USB: two 4-pin, type A connectors, J9 and J10
Ethernet: dual RJ-45 connector, J11A/B
Onboard Connectors » CompactPCI Serial connectors P1 to P6
» 18-pin extension connector for the SATA flash module (SSD), J16
» Two 204-pin DDR3 SODIMM sockets
» 60-pin, high-speed I/O extension connector
Table 1: CPS3003-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS

D R A F T — F O R I N T E R N A L U S E O N L Y
17
www.kontron.com
User Guide
CPS3003-SA
LEDs / Switches
Front Panel LEDs System Status LEDs:
» HS (blue): Hot Swap Status
» TH (red/green): Temperature Status
» WD (green): Watchdog Status
General Purpose LEDs:
» LED3..0 (red/green/red+green): General Purpose / POST Code
Ethernet LEDs:
» ACT (green): Network / Link Activity
» SPEED (green/orange): Network Speed
DIP Switch One DIP switch, SW1, for board configuration
Timer
Real Time Clock Real-time clock with 256 Byte CMOS RAM; battery-backup available
Watchdog Timer Software-configurable, two-stage Watchdog with programmable timeout ranging
from 125 ms to 4096 s in 16 steps
Serves for generating IRQ or hardware reset
Sys. Management
Thermal Management CPU and board overtemperature protection is provided by:
» Up to four Digital Thermal Sensors (DTS), one for each core
» One Digital Thermal Sensor (DTS) for the processor graphics controller
» One temperature sensor integrated in the Intel® QM77 Chipset for monitoring
the chipset
» Specially designed heat sinks
Security
TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-based
data and system security
Software
uEFI BIOS AMI Aptio® BIOS firmware based on the uEFI Specification and the Intel Platform
Innovation Framework for EFI:
» LAN boot capability for diskless systems (standard PXE)
» Redundant image; recovery possible in case of a damaged image
» Non-volatile storage of setting in the SPI boot flash (battery only required for
the RTC)
» Compatibility Support Module (CSM) providing legacy BIOS compatibility
based on AMIBIOS8
» Command shell for diagnostics and configuration
» uEFI Shell commands executable from mass storage device in a Pre-OS envi-
ronment (open interface)
Operating Systems There are various operating systems available for the CPS3003-SA. For further
information, please contact Kontron.
Table 1: CPS3003-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS

D R A F T — F O R I N T E R N A L U S E O N L Y
18
www.kontron.com
User Guide
CPS3003-SA
Note: For a description of the additional interfaces available on the 8 HP and 9 HP board ver-
sions, refer to Chapter 6, CPS3003-EXTIO Extension Module, and Chapter 7, CPS3003-
BRIDGE Extension Module, respectively.
1.5 Standards
This product complies with the requirements of the following standards.
General
Power Consumption See Chapter 4 for details.
Temperature Range Operational: 0°C to +60°C Standard (depending on processor version and air-
flow in the system)
-40°C to +85°C Extended (with Intel® Core™ i7-3517UE, 1.7 GHz ULV
processor only)
Storage: -40°C to +85°C Without hard disk and without battery
Battery 3.0V lithium battery for RTC; Battery type: UL-approved CR1632
Temperature ranges:
Operational (load): -20°C to +70°C typical
(refer to the battery manufacturer’s
specifications for exact range)
Storage (no load): -40°C to +70°C typical
Climatic Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 100 mm x 160 mm
3U, 4 HP, CompactPCI Serial-compliant form factor
Board Weight 4 HP CPS3003-SA with:
» Intel® Core™ i7-3612QE (SV), 2.1 GHz, copper heat sink: 530 grams
» Intel® Core™ i7-3555LE (LV), 2.5 GHz, aluminum heat sink: 330 grams
» Intel® Core™ i7-3517UE (ULV), 1.7 GHz, aluminum heat sink: 330 grams
The above-mentioned board weight refers to the 4 HP CPS3003-SA without exten-
sion modules such as SATA Flash module or Smart Extension Module.
Table 2: Standards
TYPE ASPECT STANDARD
CE Emission EN55022, EN50121-3-2, EN61000-6-3
Immission EN55024, EN50121-3-2, EN61000-6-2
Electrical Safety EN60950-1
Mechanical Mechanical Dimensions IEEE 1101.10
Environmental Climatic Humidity IEC60068-2-78
WEEE Directive 2002/96/EC
Waste electrical and electronic equipment
RoHS 2 Directive 2011/65/EU
Restriction of the use of certain hazardous sub-
stances in electrical and electronic equipment
Table 1: CPS3003-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS

D R A F T — F O R I N T E R N A L U S E O N L Y
19
www.kontron.com
User Guide
CPS3003-SA
In addition, boards ordered with the ruggedized service comply with the following standards as well.
Note: Customers desiring to perform further environmental testing of the CPS3003-SA must con-
tact Kontron for assistance prior to performing any such testing.
Boards without conformal coating must not be exposed to a change of temperature which
can lead to condensation. Condensation may cause irreversible damage, especially when
the board is powered up again.
Kontron does not accept any responsibility for damage to products resulting from destruc-
tive environmental testing.
1.6 Related Publications
The following publications contain information relating to this product.
Table 3: Additional Standards for Boards Ordered with Ruggedized Service
TYPE ASPECT STANDARD REMARKS
Environmental Vibration
(Sinusoidal)
IEC60068-2-6
IEC61131-2
Ruggedized version test parameters:
9-150 (Hz) frequency range
1 (g) acceleration
1 (oct/min) sweep rate
10 cycles/axis
3 axis
Single Shock IEC60068-2-27
IEC61131-2
Ruggedized version test parameters:
15 (g) acceleration
11 (ms) shock duration half sine
3 number of shocks per direction (total: 18)
6 directions
5 (s) recovery time
Table 4: Related Publications
PRODUCT PUBLICATION
CompactPCI Serial Systems PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specification
CompactPCI Systems PICMG® 2.0, Rev. 3.0 CompactPCI® Specification
CFast CFast Specification Revision 1.1
Platform Firmware Unified Extensible Firmware Interface (uEFI) specification, version 2.3.1
All Kontron products Product Safety and Implementation Guide, ID 1021-9142