Kontron CP3003-SA User manual

If it’s embedded, it’s Kontron.
» User Guide «
D R A F T — F O R I N T E R N A L U S E O N L Y
CP3003-SA/CP3003-V
3U CompactPCI Processor Board based on
the 3rd Generation Intel® Core™ i7 Processor with
the Intel® QM77 Chipset
Doc. ID: 1052-6929, Rev. 3.0
April 28, 2017

Preface CP3003-SA/CP3003-V
Page ii ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
Revision History
Imprint
Kontron Europe GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Europe GmbH +49 (0) 800-SALESKONTRON
Sudetenstraße 7 [email protected]
D - 87600 Kaufbeuren Germany
For further information about other Kontron products, please visit our Internet web site:
www.kontron.com.
Disclaimer
Copyright © 2013 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to
be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron
logo and all other trademarks or registered trademarks are the property of their respective own-
ers and are recognized. Specifications are subject to change without notice.
Publication Title: CP3003-SA/CP3003-V: 3U CompactPCI Processor Board based on the
3rd Generation Intel® Core™ i7 Processor with the Intel® QM77 Chipset
Doc. ID: 1052-6929
Rev. Brief Description of Changes Date of Issue
1.0 Initial issue 14-Nov-2012
2.0 Added description for the CP3003-V 29-Jul-2013
3.0 Added AES-NI information 28-Apr-2017

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page iii
D R A F T — F O R I N T E R N A L U S E O N L Y
Table of Contents
Revision History .........................................................................................................ii
Imprint ........................................................................................................................ii
Disclaimer ..................................................................................................................ii
Table of Contents ......................................................................................................iii
List of Tables .............................................................................................................ix
List of Figures ......................................................................................................... xiii
Proprietary Note .......................................................................................................xv
Trademarks ..............................................................................................................xv
Environmental Protection Statement ........................................................................xv
Explanation of Symbols .......................................................................................... xvi
For Your Safety ...................................................................................................... xvii
High Voltage Safety Instructions ........................................................................ xvii
Special Handling and Unpacking Instructions ................................................... xvii
General Instructions on Usage ............................................................................. xviii
Two Year Warranty .................................................................................................. xix
1. Introduction ............................................................................. 1 - 3
1.1 Board Overview ....................................................................................... 1 - 3
1.2 Board-Specific Information ...................................................................... 1 - 3
1.3 System Expansion Capabilities ............................................................... 1 - 5
1.3.1 CP3003-HDD Module (8 HP and 12 HP) ........................................ 1 - 5
1.3.2 CP3003-XMC Module (8 HP) ......................................................... 1 - 5
1.3.3 CP-RIO3-04 Rear I/O Module ......................................................... 1 - 5
1.3.4 SATA Flash Module ........................................................................ 1 - 5
1.3.5 Smart Extension Module ................................................................. 1 - 5
1.4 Board Diagrams ...................................................................................... 1 - 5
1.4.1 Functional Block Diagram ............................................................... 1 - 6
1.4.2 Front Panel ..................................................................................... 1 - 7
1.4.3 Board Layout .................................................................................. 1 - 8
1.5 Technical Specification ............................................................................ 1 - 9
1.6 Standards .............................................................................................. 1 - 14
1.7 Related Publications ............................................................................. 1 - 15

Preface CP3003-SA
Page iv ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
2. Functional Description ............................................................ 2 - 3
2.1 Processor .................................................................................................2 - 3
2.2 Memory ....................................................................................................2 - 4
2.3 Intel® QM77 Express Chipset .................................................................2 - 5
2.4 Timer ........................................................................................................2 - 5
2.5 Watchdog Timer ......................................................................................2 - 5
2.6 Battery .....................................................................................................2 - 6
2.7 Reset .......................................................................................................2 - 6
2.8 Flash Memory ..........................................................................................2 - 6
2.8.1 SPI Boot Flash for uEFI BIOS .........................................................2 - 6
2.8.2 SATA Flash Module (Optional) ........................................................2 - 7
2.9 8 HP Extension Module ...........................................................................2 - 7
2.10 Trusted Platform Module 1.2 ....................................................................2 - 7
2.11 Board Interfaces ......................................................................................2 - 8
2.11.1 Front Panel LEDs ............................................................................2 - 8
2.11.1.1 Watchdog and Temperature Status LEDs ...............................2 - 8
2.11.1.2 General Purpose LEDs ...........................................................2 - 9
2.11.2 DIP Switch SW1 ............................................................................2 - 10
2.11.3 USB Interfaces ..............................................................................2 - 10
2.11.3.1 Front Panel USB Connectors J5 and J6 ...............................2 - 11
2.11.4 Integrated Processor Graphics Controller ..................................... 2 - 11
2.11.4.1 Graphics Memory Usage ......................................................2 - 12
2.11.4.2 VGA Analog Interface and Connector J4 ..............................2 - 12
2.11.5 Serial Ports ....................................................................................2 - 12
2.11.6 Gigabit Ethernet ............................................................................2 - 13
2.11.7 SATA Interfaces .............................................................................2 - 14
2.11.7.1 SATA Connector J3 ..............................................................2 - 14
2.11.8 Debug Interface .............................................................................2 - 15
2.11.9 CompactPCI Interface ...................................................................2 - 15
2.11.9.1 Board Functionality when Installed in System Controller Slot 2 - 15
2.11.9.2 Board Functionality when Installed in Peripheral Slot (Passive
Mode) 2 - 15
2.11.9.3 Front/Rear I/O Configuration ................................................2 - 15
2.11.9.4 Board Insertion/Replacement under Power .........................2 - 16

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page v
D R A F T — F O R I N T E R N A L U S E O N L Y
2.11.9.5 Power Ramping .................................................................... 2 - 16
2.11.9.6 ENUM# Interrupt .................................................................. 2 - 16
2.11.10 CompactPCI Connectors J1 and J2 ............................................. 2 - 17
2.11.10.1 CompactPCI Connector Keying ........................................... 2 - 17
2.11.10.2 CompactPCI Connectors J1 and J2 Pinouts ........................ 2 - 18
2.11.10.3 Optional Rear I/O Interface .................................................. 2 - 21
2.11.10.4 Rear I/O Pin Description ...................................................... 2 - 24
3. Installation ............................................................................... 3 - 3
3.1 Safety Requirements ............................................................................... 3 - 3
3.2 Initial Installation Procedures .................................................................. 3 - 4
3.3 Standard Removal Procedures ............................................................... 3 - 5
3.4 Insertion/Removal under Power ............................................................. 3 - 6
3.4.1 Replacement under Power in Peripheral Slot ................................. 3 - 6
3.5 Installation of CP3003-SA Peripheral Devices ........................................ 3 - 8
3.5.1 USB Device Installation ................................................................ 3 - 11
3.5.2 Installation of External SATA Devices ........................................... 3 - 11
3.5.3 SATA Flash Module Installation .................................................... 3 - 11
3.5.4 Smart Extension Module Installation ............................................ 3 - 12
3.5.5 2.5” HDD/SSD Installation ............................................................ 3 - 12
3.5.6 XMC Module Installation ............................................................... 3 - 12
3.5.7 CFast Card Installation ................................................................. 3 - 16
3.5.8 Rear I/O Device Installation .......................................................... 3 - 16
3.5.9 Battery Replacement .................................................................... 3 - 16
3.6 Software Installation .............................................................................. 3 - 17
4. Configuration ........................................................................... 4 - 3
4.1 DIP Switch Configuration ........................................................................ 4 - 3
4.1.1 I/O Address Map ............................................................................. 4 - 4
4.2 CP3003-SA-Specific Registers ............................................................... 4 - 5
4.2.1 Status Register 0 (STAT0) .............................................................. 4 - 5
4.2.2 Status Register 1 (STAT1) .............................................................. 4 - 6
4.2.3 Control Register 0 (CTRL0) ............................................................ 4 - 6

Preface CP3003-SA
Page vi ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
4.2.4 Control Register 1 (CTRL1) ............................................................4 - 7
4.2.5 Device Protection Register (DPROT) ..............................................4 - 8
4.2.6 Reset Status Register (RSTAT) .......................................................4 - 9
4.2.7 Board Interrupt Configuration Register (BICFG) ...........................4 - 10
4.2.8 Status Register 2 (STAT2) .............................................................4 - 11
4.2.9 Board ID High Byte Register (BIDH) .............................................4 - 11
4.2.10 Board and PLD Revision Register (BREV) ...................................4 - 12
4.2.11 Geographic Addressing Register (GEOAD) ..................................4 - 12
4.2.12 Board ID Low Byte Register (BIDL) ..............................................4 - 12
4.2.13 Watchdog Timer Control Register (WTIM) ....................................4 - 13
4.2.14 LED Configuration Register (LCFG) .............................................4 - 15
4.2.15 LED Control Register (LCTRL) .....................................................4 - 16
4.2.16 General Purpose Output Register (GPOUT) .................................4 - 17
4.2.17 General Purpose Input Register (GPIN) .......................................4 - 18
5. Power Considerations ............................................................. 5 - 3
5.1 System Power ..........................................................................................5 - 3
5.1.1 CP3003-SA Baseboard ...................................................................5 - 3
5.1.2 Backplane .......................................................................................5 - 4
5.1.3 Power Supply Units .........................................................................5 - 4
5.1.3.1 Start-Up Requirement .............................................................5 - 4
5.1.3.2 Power-Up Sequence ...............................................................5 - 4
5.1.3.3 Tolerance ................................................................................5 - 5
5.1.3.4 Regulation ...............................................................................5 - 5
5.2 Power Consumption ................................................................................5 - 6
5.3 Power Consumption of CP3003-SA Accessories ....................................5 - 8
5.4 Maximum Power Consumption of XMC Modules ....................................5 - 8
6. Thermal Considerations ......................................................... 6 - 3
6.1 Board Internal Thermal Monitoring ..........................................................6 - 3
6.2 Processor Thermal Monitoring .................................................................6 - 3
6.2.1 Digital Thermal Sensor (DTS) .........................................................6 - 3
6.2.2 Adaptive Thermal Monitor ...............................................................6 - 3

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page vii
D R A F T — F O R I N T E R N A L U S E O N L Y
6.2.2.1 Frequency/sVID Control ........................................................ 6 - 4
6.2.2.2 Clock Modulation .................................................................... 6 - 4
6.2.3 Catastrophic Cooling Failure Sensor ............................................. 6 - 4
6.3 Chipset Thermal Monitor Feature ............................................................ 6 - 5
6.4 External Thermal Regulation ................................................................... 6 - 5
6.4.1 Operational Limits for the CP3003-SA .................................................6 - 6
6.4.2 Peripherals ...................................................................................... 6 - 8
A. CP3003-HDD Module ...............................................................A - 3
A.1 Overview .................................................................................................A - 3
A.2 Technical Specifications ..........................................................................A - 3
A.3 CP3003-HDD Module Functional Block Diagram ...................................A - 5
A.4 Front Panel of the CP3003-SA with CP3003-HDD Module ....................A - 6
A.5 CP3003-HDD Module Layout ..................................................................A - 7
A.6 Module Interfaces (Front Panel and Onboard) ........................................A - 9
A.6.1 DisplayPort Interfaces .....................................................................A - 9
A.6.2 Gigabit Ethernet Interface .............................................................A - 10
A.6.3 USB Interface ............................................................................... A - 11
A.6.4 Serial Port ..................................................................................... A - 11
A.6.5 CFast Card Connector ..................................................................A - 12
A.6.6 SATA Interface ..............................................................................A - 13
A.6.7 Battery ..........................................................................................A - 14
B. CP3003-XMC Module ...............................................................B - 3
B.1 Overview .................................................................................................B - 3
B.2 Technical Specifications ..........................................................................B - 3
B.3 CP3003-XMC Module Functional Block Diagram ...................................B - 4
B.4 Front Panel of the 8 HP CP3003-SA with CP3003-XMC Module ...........B - 5
B.5 CP3003-XMC Module Layout .................................................................B - 6
B.6 Module Interfaces (Onboard) ..................................................................B - 7
B.6.1 CFast Card Connector ....................................................................B - 7
B.6.2 XMC Connector ..............................................................................B - 8

Preface CP3003-SA
Page viii ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
C. CP-RIO3-04 Rear I/O Module ................................................. C - 3
C.1 Overview ................................................................................................. C - 3
C.2 Technical Specifications ......................................................................... C - 3
C.3 Front Panels ........................................................................................... C - 4
C.4 Module Layout: 4 HP and 8 HP Versions ............................................... C - 5
C.5 Module Interfaces ................................................................................... C - 6
C.5.1 USB Interfaces ............................................................................... C - 6
C.5.2 VGA Interface ................................................................................. C - 6
C.5.3 Gigabit Ethernet Interface .............................................................. C - 7
C.5.4 COM Interface ................................................................................ C - 8
C.5.5 Peripheral Control Interface ........................................................... C - 9
C.5.6 SATA Interfaces ............................................................................ C - 10
C.5.7 Rear I/O Interface on CompactPCI Connector rJ2 ....................... C - 11
D. SATA Flash Module ................................................................ D - 3
D.1 Technical Specifications ......................................................................... D - 3
D.2 SATA Flash Module Layout .................................................................... D - 4
E. Smart Extension Module .........................................................E - 3
E.1 Technical Specifications ......................................................................... E - 3
E.2 Smart Extension Module Layout ............................................................. E - 4
E.3 Module Interfaces ................................................................................... E - 5
E.3.1 USB Interface ................................................................................. E - 5
E.3.2 SATA Interface ............................................................................... E - 6
F. CP3003-V ..................................................................................F - 3
F.1 Overview ................................................................................................. F - 3
F.2 CP3003-SA vs. CP3003-V ...................................................................... F - 4
F.3 Processor ................................................................................................ F - 5
F.3.1 Integrated Processor Graphics Controller ...................................... F - 5
F.4 Functional Block Diagram ....................................................................... F - 6
F.5 Front Panel of the CP3003-V .................................................................. F - 7
F.6 Power Consumption ............................................................................... F - 8
F.7 Operational Limits for the CP3003-V .......................................................... F - 10

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page ix
D R A F T — F O R I N T E R N A L U S E O N L Y
List of Tables
1-1 CP3003-SA Main Specifications ................................................................ 1 - 9
1-2 Standards ................................................................................................ 1 - 14
1-3 Additional Standards for Boards Ordered with Ruggedized Service ....... 1 - 15
1-4 Related Publications ................................................................................ 1 - 15
2-1 Features of the Processors Supported on the CP3003-SA ....................... 2 - 4
2-2 Watchdog and Temperature Status LEDs Function ................................... 2 - 8
2-3 General Purpose LEDs Function ............................................................... 2 - 9
2-4 POST Code Sequence ............................................................................ 2 - 10
2-5 POST Code Example .............................................................................. 2 - 10
2-6 DIP Switch SW1 Function ....................................................................... 2 - 10
2-7 USB Connectors J5 and J6 Pinout .......................................................... 2 - 11
2-8 Maximum Resolution in 3-Display Configurations ................................... 2 - 11
2-9 D-Sub VGA Connector J4 Pinout ............................................................ 2 - 12
2-10 Pinout of Dual GbE Con. J7A/B ............................................................... 2 - 13
2-11 SATA Connector J3 Pinout ...................................................................... 2 - 14
2-12 CompactPCI Connector J1 System Controller Slot Pinout ...................... 2 - 18
2-13 CompactPCI Connector J1 Peripheral Slot Pinout .................................. 2 - 19
2-14 64-bit CompactPCI Connector J2 Pinout (CP3003-SA Front I/O Vers.) .. 2 - 20
2-15 Rear I/O CompactPCI Connector J2 Pinout (CP3003-SA Rear I/O Vers.) 2 - 22
2-17 GPIO Signal Description .......................................................................... 2 - 23
2-16 Rear I/O Signal Description ..................................................................... 2 - 23
2-18 COMA and COMB Signal Description ..................................................... 2 - 24
2-19 GPIO Signal Description .......................................................................... 2 - 25
2-20 VGA Signal Description ........................................................................... 2 - 25
2-21 Gigabit Ethernet Signal Description ......................................................... 2 - 26
2-22 SATA Signal Description .......................................................................... 2 - 27
2-23 USB Signal Description ........................................................................... 2 - 27
2-24 Power Supply and Power Management Signal Description .................... 2 - 28
4-1 DIP Switch SW1 Functionality ................................................................... 4 - 3
4-2 I/O Address Map ........................................................................................ 4 - 4
4-3 Status Register 0 (STAT0) ......................................................................... 4 - 5
4-4 Status Register 1 (STAT1) ......................................................................... 4 - 6
4-5 Control Register 0 (CTRL0) ....................................................................... 4 - 6

Preface CP3003-SA
Page x ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
4-6 Control Register 1 (CTRL1) ....................................................................... 4 - 7
4-7 Device Protection Register (DPROT) ......................................................... 4 - 8
4-8 Reset Status Register (RSTAT) .................................................................. 4 - 9
4-9 Board Interrupt Configuration Register (BICFG) ...................................... 4 - 10
4-10 Status Register 2 (STAT2) ........................................................................ 4 - 11
4-11 Board ID High Byte Register (BIDH) ........................................................ 4 - 11
4-12 Board and PLD Revision Register (BREV) .............................................. 4 - 12
4-13 Geographic Addressing Register (GEOAD) ............................................. 4 - 12
4-14 Board ID Low Byte Register (BIDL) ......................................................... 4 - 12
4-15 Watchdog Timer Control Register (WTIM) ............................................... 4 - 14
4-16 LED Configuration Register (LCFG) ........................................................ 4 - 15
4-17 LED Control Register (LCTRL) ................................................................ 4 - 16
4-18 General Purpose Output Register (GPOUT) ............................................ 4 - 17
4-19 General Purpose Input Register (GPIN) .................................................. 4 - 18
5-1 Maximum Input Power Voltage Limits ........................................................ 5 - 3
5-2 DC Operational Input Voltage Ranges ....................................................... 5 - 3
5-3 Input Voltage Characteristics ..................................................................... 5 - 5
5-4 CP3003-SA in EFI Shell ............................................................................. 5 - 7
5-5 CP3003-SA with Win. 7 and Processor and Graphics in Idle State ........... 5 - 7
5-6 CP3003-SA with Win. 7 and Max. Proc. Workload and Basic Graphics Operation

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page xi
D R A F T — F O R I N T E R N A L U S E O N L Y
5 - 7
5-7 CP3003-SA with Win. 7 and Max. Processor and Graphics Workload ...... 5 - 7
5-8 Power Consumption of CP3003-SA Accessories ...................................... 5 - 8
5-9 XMC Module Current ................................................................................. 5 - 8
A-1 CP3003-HDD Module Specifications ......................................................... A - 3
A-2 DisplayPort Connectors J1 and J2 Pinout ................................................. A - 9
A-3 Gigabit Ethernet Connector J5 Pinout ..................................................... A - 10
A-4 USB Connector J7 Pinout ........................................................................ A - 11
A-5 Serial Port Connector J8 Pinout .............................................................. A - 11
A-6 CFast Connector J3 Pinout ..................................................................... A - 12
A-7 SATA Connector J6/J2 Pinout ................................................................. A - 13
B-1 CP3003-XMC Module Specifications ........................................................ B - 3
B-2 CFast Connector J2 Pinout ....................................................................... B - 7
B-3 XMC Connector J1 Pinout ......................................................................... B - 8
C-1 CP-RIO3-04 Rear I/O Module Main Specifications ................................... C - 3
C-2 USB Con. J11 and J12 Pinout ................................................................... C - 6
C-3 D-Sub VGA Connector J7 Pinout .............................................................. C - 6
C-4 Dual Gigabit Ethernet Connector J10A/B Pinout ....................................... C - 7
C-5 COM Connectors J2a (COMA)
and J3a (COMB) Pinout C - 8
C-6 Serial Port Con. J2 (COMA)

Preface CP3003-SA
Page xii ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
and J3 (COMB) Pinout C - 9
C-7 Peripheral Connector J13 Pinout .............................................................. C - 9
C-8 SATA Connectors J5 and J6 Pinout ........................................................ C - 10
C-9 Rear I/O CompactPCI Connector rJ2 Pinout .......................................... C - 12
C-10 Rear I/O Signal Description ..................................................................... C - 13
D-1 SATA Flash Module Specifications ............................................................ D - 3
E-1 Smart Extension Module Specifications .................................................... E - 3
E-2 USB Connector J2 Pinout ......................................................................... E - 5
E-3 SATA Connector J1 Pinout ........................................................................ E - 6
F-1 CP3003-SA vs. CP3003-V ........................................................................ F - 4
F-2 Features of the Intel® Celeron® 807UE Processor .................................. F - 5
F-3 Maximum Resolution in 3-Display Configurations ..................................... F - 5
F-4 CP3003-V in EFI Shell .............................................................................. F - 9
F-5 CP3003-V with Win. 7 and Processor and Graphics in Idle State ............. F - 9
F-6 CP3003-V with Win. 7 and Max. Proc. Workload and Basic Graph. Operation F
- 9
F-7 CP3003-V with Win. 7 and Max. Processor and Graphics Workload ....... F - 9

Preface CP3003-SA
Page xiii ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
This page has been intentionally left blank.

Preface CP3003-SA
Page xiv ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page xiii
D R A F T — F O R I N T E R N A L U S E O N L Y
List of Figures
1-1 CP3003-SA Functional Block Diagram .................................................... 1 - 6
1-2 4 HP CP3003-SA Front Panel ................................................................. 1 - 7
1-3 4 HP CP3003-SA Board Layout (Top View) ............................................. 1 - 8
1-4 4 HP CP3003-SA Board Layout (Bottom View) ....................................... 1 - 8
2-1 USB Connectors J5 and J6 .................................................................... 2 - 11
2-2 D-Sub VGA Con. J4 ............................................................................... 2 - 12
2-3 Dual Gigabit Ethernet Connector J7A/B ................................................ 2 - 13
2-4 SATA Con. J3 ......................................................................................... 2 - 14
2-5 CPCI Connectors J1/J2 ......................................................................... 2 - 17
3-1 4 HP CP3003-SA with SATA Flash Module ............................................. 3 - 8
3-2 4 HP CP3003-SA with Smart Extension Module ..................................... 3 - 9
3-3 8 HP CP3003-SA with CP3003-HDD Module .......................................... 3 - 9
3-4 12 HP CP3003-SA with CP3003-HDD Module and SATA Adapter Module 3 -
10
3-5 8 HP CP3003-SA with CP3003-XMC Module ........................................ 3 - 10
3-6 Screws Securing the Front Panel and the CP3003-XMC to the CP3003-SA 3 -
13
3-7 Screws Securing the XMC Module to the CP3003-XMC Extension Module 3 -
13
3-8 CP3003-SA Board with CP3003-XMC Extension Module and XMC Module 3 -
14
3-9 CP3003-SA with Front Panel, CP3003-XMC Extension Module and XMC Mod-
ule 3 - 14
4-1 DIP Switch SW1 ....................................................................................... 4 - 3
6-1 CP3003-SA with i7-3612QE (SV), 2.1 GHz ............................................. 6 - 6
6-2 CP3003-SA with i7-3555LE (LV), 2.5 GHz .............................................. 6 - 7
6-3 CP3003-SA with i7-3517UE (ULV), 1.7 GHz ........................................... 6 - 7
A-1 CP3003-HDD Module Functional Block Diagram .................................... A - 5
A-2 Front Panel of the 8 HP and 12 HP CP3003-SA with CP3003-HDD Module A -

Preface CP3003-SA
Page xiv ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
6
A-3 CP3003-HDD Module Layout for 8 HP Board Version (Top View) .......... A - 7
A-4 CP3003-HDD Module Layout for 12 HP Board Version (Top View) ........ A - 7
A-5 SATA Adapter for 2.5" SATA HDD/SSD (Top View) ................................ A - 8
A-6 DisplayPort Connectors J1 and J2 .......................................................... A - 9
A-7 Gigabit Ethernet
Connector J5 A - 10
A-8 USB Connector J7 .................................................................................. A - 11
A-9 Serial Port Connector J8 ........................................................................ A - 11
A-10 CFast Connector J3 .............................................................................. A - 12
A-11 SATA Connector J6/J2 .......................................................................... A - 13
B-1 CP3003-XMC Module Functional Block Diagram ................................... B - 4
B-2 Front Panel of the 8 HP CP3003-SA with CP3003-XMC Module ........... B - 5
B-3 CP3003-XMC Module Layout (Top View) ................................................ B - 6
B-4 CP3003-XMC Module Layout (Bottom View) .......................................... B - 6
B-5 CFast Connector J6 ................................................................................ B - 7
B-6 XMC Con. J1 ........................................................................................... B - 8
C-1 CP-RIO3-04 Front Panels, 4 HP and 8 HP Versions .............................. C - 4
C-2 CP-RIO3-04 Rear I/O Module Layout, 4 HP Version .............................. C - 5
C-3 CP-RIO3-04 Rear I/O Module Layout, 8 HP Version ............................. C - 5
C-4 USB Con. J11/J12 ................................................................................... C - 6
C-5 D-Sub VGA Connector J7 ....................................................................... C - 6
C-6 Dual Gigabit Ethernet Connector J10A/B ................................................ C - 7
C-7 COM Connectors J2a (COMA) and J3a (COMB) .................................... C - 8
C-8 Serial Port Connectors

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page xv
D R A F T — F O R I N T E R N A L U S E O N L Y
J2 (COMA) and J3 (COMB) C - 9
C-9 Peripheral Con. J13 ................................................................................. C - 9
C-10 SATA Con. J5 and J6 ............................................................................. C - 10
C-11 Rear I/O CompactPCI Connector rJ2 .................................................... C - 11
D-1 SATA Flash Module Layout (Top View) .................................................... D - 4
D-2 SATA Flash Module Layout (Bottom View) .............................................. D - 4
E-1 Smart Extension Module Layout (Top View) ............................................ E - 4
E-2 Smart Extension Module Layout (Bottom View) ...................................... E - 4
E-3 USB Connector J2 ................................................................................... E - 5
E-4 SATA Con. J1 ........................................................................................... E - 6
F-1 CP3003-V Functional Block Diagram ...................................................... F - 6
F-2 Front Panel of the CP3003-V ................................................................... F - 7
F-3 CP3003-V with Celeron® 807UE, 1.0 GHz ............................................ F - 10

Preface CP3003-SA
Page xvi ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y

CP3003-SA Preface
ID 1052-6929, Rev. 3.0 Page xv
D R A F T — F O R I N T E R N A L U S E O N L Y
Proprietary Note
This document contains information proprietary to Kontron. It may not be copied or transmitted
by any means, disclosed to others, or stored in any retrieval system or media without the prior
written consent of Kontron or one of its authorized agents.
The information contained in this document is, to the best of our knowledge, entirely correct.
However, Kontron cannot accept liability for any inaccuracies or the consequences thereof, or
for any liability arising from the use or application of any circuit, product, or example shown in
this document.
Kontron reserves the right to change, modify, or improve this document or the product
described herein, as seen fit by Kontron without further notice.
Trademarks
Kontron, the PEP logo and, if occurring in this manual, “CXM” are trademarks owned by
Kontron, Kaufbeuren (Germany). In addition, this document may include names, company
logos and trademarks, which are registered trademarks and, therefore, proprietary to their
respective owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where
possible. Many of the components used (structural parts, printed circuit boards, connectors,
batteries, etc.) are capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with
applicable country, state, or local laws or regulations.

Preface CP3003-SA
Page xvi ID 1052-6929, Rev. 3.0
D R A F T — F O R I N T E R N A L U S E O N L Y
Explanation of Symbols
Caution, Electric Shock!
This symbol and title warn of hazards due to electrical shocks (> 60V)
when touching products or parts of them. Failure to observe the pre-
cautions indicated and/or prescribed by the law may endanger your
life/health and/or result in damage to your material.
Please refer also to the section “High Voltage Safety Instructions” on
the following page.
Warning, ESD Sensitive Device!
This symbol and title inform that electronic boards and their compo-
nents are sensitive to static electricity. Therefore, care must be taken
during all handling operations and inspections of this product, in
order to ensure product integrity at all times.
Please read also the section “Special Handling and Unpacking
Instructions” on the following page.
Warning!
This symbol and title emphasize points which, if not fully understood
and taken into consideration by the reader, may endanger your health
and/or result in damage to your material.
Note ...
This symbol and title emphasize aspects the reader should read
through carefully for his or her own advantage.