Kontron CP3004-SA User manual

D R A F T — F O R I N T E R N A L U S E O N L Y
The pulse of innovation
» User Guide «
CP3004-SA
Doc. ID: 1057-3535, Rev. 1.2
Date: March 18, 2019

D R A F T — F O R I N T E R N A L U S E O N L Y
2
www.kontron.com
User Guide
CP3004-SA
Revision History
Imprint
Kontron Europe GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Europe GmbH +49 (0) 800-SALESKONTRON
Lise-Meitner-Str. 3-5 [email protected]
86156 Augsburg, Germany
For further information concerning other Kontron products, please visit our Internet website:
www.kontron.com.
Disclaimer
Copyright © 2016 Kontron AG. All rights reserved. All data is for information purposes only and not
guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate;
however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other
trademarks or registered trademarks are the property of their respective owners and are recognized.
Specifications are subject to change without notice.
Revision Brief Description of Changes Date of Issue
1.0 Initial issue 4-Mar-2016
1.1 Updated sections 2.7.2 and 6.6.3 29-Apr-2017
1.2 Updated table 9, VGA/DP update 18-Mar-2019

D R A F T — F O R I N T E R N A L U S E O N L Y
3
www.kontron.com
User Guide
CP3004-SA
Contents
Revision History ..........................................................................................................2
Imprint .....................................................................................................................2
Disclaimer ..................................................................................................................2
Contents ....................................................................................................................3
Tables .......................................................................................................................8
Figures .................................................................................................................... 10
Warranty .................................................................................................................. 11
Proprietary Note ........................................................................................................ 11
Trademarks .............................................................................................................. 11
Environmental Protection Statement .............................................................................. 11
1 Introduction ...................................................................................... 12
1.1 Board Overview .......................................................................................... 12
1.2 System Expansion Capabilities ....................................................................... 13
1.2.1 CP3004-HDD Module (8 HP and 12 HP) ............................................................. 13
1.2.2 CP3004-XMC Module (8 HP) ........................................................................... 13
1.2.3 CP-RIO3-04 Rear I/O Module ......................................................................... 13
1.2.4 SATA Flash Module ...................................................................................... 13
1.2.5 Smart Extension Module ............................................................................... 13
1.3 Board Diagrams.......................................................................................... 13
1.3.1 Functional Block Diagram ............................................................................. 14
1.3.2 Front Panel ............................................................................................... 15
1.3.3 Board Layout ............................................................................................. 16
1.4 Technical Specification ................................................................................ 17
1.5 Standards ................................................................................................. 21
1.6 Related Publications.................................................................................... 22
2 Functional Description ......................................................................... 23
2.1 Processor and Chipset.................................................................................. 23
2.1.1 Integrated Processor Graphics Controller ......................................................... 24
2.2 Memory .................................................................................................... 24
2.3 Watchdog Timer.......................................................................................... 24
2.4 Battery..................................................................................................... 24
2.5 Flash Memory............................................................................................. 25
2.5.1 SPI Boot Flash for uEFI BIOS.......................................................................... 25
2.5.2 SATA Flash Module ...................................................................................... 25
2.6 Trusted Platform Module 1.2.......................................................................... 25
2.7 Board Interfaces......................................................................................... 25
2.7.1 Front Panel LEDs......................................................................................... 25
2.7.1.1 System Status LEDs ..................................................................................... 26

D R A F T — F O R I N T E R N A L U S E O N L Y
4
www.kontron.com
User Guide
CP3004-SA
2.7.1.2 General Purpose LEDs .................................................................................. 26
2.7.2 USB Interfaces ........................................................................................... 27
2.7.3 VGA Interface ............................................................................................ 27
2.7.4 Serial Ports ............................................................................................... 27
2.7.5 Gigabit Ethernet ......................................................................................... 28
2.7.6 SATA Interfaces .......................................................................................... 28
2.7.7 Debug Interface ......................................................................................... 28
2.7.8 CompactPCI Interface .................................................................................. 29
2.7.8.1 Board Functionality when Installed in System Slot.............................................. 29
2.7.8.2 Board Functionality when Installed in Peripheral Slot (Passive Mode) ..................... 29
2.7.8.3 Front/Rear I/O Configuration........................................................................ 29
2.7.8.4 Board Insertion/ Replacement under Power ...................................................... 29
2.7.8.5 Power Ramping .......................................................................................... 30
2.7.8.6 ENUM# Interrupt ........................................................................................ 30
2.7.9 CompactPCI Connectors J1 and J2................................................................... 31
2.7.9.1 CompactPCI Connector Keying ....................................................................... 31
2.7.9.2 CompactPCI Connectors J1 and J2 Pinouts ........................................................ 32
2.7.9.3 Optional Rear I/O Interface........................................................................... 35
2.7.9.4 Rear I/O Pin Description............................................................................... 38
3 Configuration..................................................................................... 42
3.1 DIP Switch Configuration.............................................................................. 42
3.2 System Write Protection ............................................................................... 43
3.3 CP3004-SA-Specific Registers ........................................................................ 43
3.3.1 Status Register 0 (STAT0) ............................................................................. 44
3.3.2 Status Register 1 (STAT1) ............................................................................. 45
3.3.3 Control Register 0 (CTRL0) ............................................................................ 46
3.3.4 Control Register 1 (CTRL1) ............................................................................ 47
3.3.5 Device Protection Register (DPROT)................................................................. 48
3.3.6 Reset Status Register (RSTAT) ........................................................................ 49
3.3.7 Board Interrupt Configuration Register (BICFG) ................................................. 50
3.3.8 Status Register 2 (STAT2) ............................................................................. 51
3.3.9 Board ID High-Byte Register (BIDH)................................................................ 52
3.3.10 Board and PLD Revision Register (BREV)........................................................... 52
3.3.11 Geographic Addressing Register (GEOAD) ......................................................... 52
3.3.12 Watchdog Timer Control Register (WTIM) ......................................................... 53
3.3.13 Board ID Low-Byte Register (BIDL) ................................................................. 55
3.3.14 LED Configuration Register (LCFG) .................................................................. 55
3.3.15 LED Control Register (LCTRL) ......................................................................... 56
3.3.16 General Purpose Output Register (GPOUT)......................................................... 57
3.3.17 General Purpose Input Register (GPIN)............................................................ 57
4 Power Considerations .......................................................................... 58
4.1 CP3004-SA Voltage Ranges............................................................................ 58
4.2 Power Consumption of the CP3004-SA.............................................................. 58
4.3 Power Consumption of CP3004-SA Accessories ................................................... 59

D R A F T — F O R I N T E R N A L U S E O N L Y
5
www.kontron.com
User Guide
CP3004-SA
4.4 Maximum Power Consumption of XMC Modules ................................................... 60
4.5 Current Limits ............................................................................................ 60
5 Thermal Considerations ........................................................................ 61
5.1 Operational Limits for the CP3004-SA .............................................................. 62
6 CP3004-HDD Extension Module .............................................................. 64
6.1 Overview................................................................................................... 64
6.2 Technical Specifications ............................................................................... 64
6.3 CP3004-HDD Module Functional Block Diagram .................................................. 66
6.4 Front Panel of the CP3004-SA with CP3004-HDD Module....................................... 67
6.5 CP3004-HDD Module Layout .......................................................................... 68
6.6 Module Interfaces ....................................................................................... 69
6.6.1 DisplayPort Interfaces ................................................................................. 69
6.6.2 Gigabit Ethernet Interface ............................................................................ 69
6.6.3 USB Interface ............................................................................................ 69
6.6.4 Serial Port................................................................................................. 70
6.6.5 CFast Interface........................................................................................... 70
6.6.6 SATA Interface ........................................................................................... 70
7 CP3004-XMC Extension Module .............................................................. 71
7.1 Overview................................................................................................... 71
7.2 Technical Specifications ............................................................................... 71
7.3 CP3004-XMC Module Functional Block Diagram .................................................. 72
7.4 Front Panel of the CP3004-SA with CP3004-XMC Module ....................................... 73
7.5 CP3004-XMC Module Layout........................................................................... 74
7.6 Module Interfaces ....................................................................................... 75
7.6.1 CFast Interface........................................................................................... 75
7.6.2 XMC Interface ............................................................................................ 75
8 CP-RIO3-04 Rear Transition Module ........................................................ 76
8.1 Overview................................................................................................... 76
8.2 Technical Specifications ............................................................................... 76
8.3 CP-RIO3-04 Front Panels .............................................................................. 77
8.4 CP-RIO3-04 Rear Transition Module Layout ....................................................... 78
8.5 Module Interfaces ....................................................................................... 80
8.5.1 USB Interfaces ........................................................................................... 80
8.5.2 VGA Interface ............................................................................................ 80
8.5.3 Gigabit Ethernet Interface ............................................................................ 80
8.5.4 COM Interface ............................................................................................ 80
8.5.5 Peripheral Control Interface .......................................................................... 81
8.5.6 SATA Interfaces .......................................................................................... 81
8.5.7 Rear I/O Interface on CompactPCI Connector rJ2................................................ 82

D R A F T — F O R I N T E R N A L U S E O N L Y
6
www.kontron.com
User Guide
CP3004-SA
9 SATA Flash Module............................................................................... 84
9.1 Overview................................................................................................... 84
9.2 Technical Specifications ............................................................................... 84
9.3 SATA Flash Module Layout............................................................................. 84
10 Smart Extension Module ....................................................................... 85
10.1 Overview................................................................................................... 85
10.2 Technical Specifications ............................................................................... 85
10.3 Smart Extension Module Layout ..................................................................... 85
10.4 Module Interfaces ....................................................................................... 85
10.4.1 USB Interface ............................................................................................ 85
10.4.2 SATA Interface ........................................................................................... 85
11 Installation ....................................................................................... 86
11.1 Safety ...................................................................................................... 86
11.2 General Instructions on Usage ....................................................................... 86
11.3 Board Installation ...................................................................................... 86
11.3.1 Standard Board Insertion ............................................................................. 87
11.3.2 Standard Board Removal .............................................................................. 87
11.4 Installation of CP3004-SA Peripheral Devices .................................................... 88
11.4.1 SATA Flash Module Installation ...................................................................... 90
11.4.2 Smart Extension Module Installation ............................................................... 91
11.4.3 Installation of External SATA Devices .............................................................. 91
11.4.4 2.5” HDD/ SSD Installation ........................................................................... 91
11.4.5 XMC Module Installation ............................................................................... 92
11.4.6 CFast Card Installation ................................................................................. 95
11.4.7 Rear I/O Device Installation .......................................................................... 96
11.5 Battery Replacement ................................................................................... 96
12 uEFI BIOS .......................................................................................... 97
12.1 Starting the uEFI BIOS ................................................................................. 97
12.2 Setup Menus.............................................................................................. 98
12.2.1 Main Setup Menu ........................................................................................ 98
12.2.2 Advanced Setup Menu .................................................................................. 99
12.2.3 Security Setup Menu.................................................................................. 101
12.2.3.1 Remember the Password ..............................................................................101
12.2.4 Boot Setup Menu ...................................................................................... 101
12.2.5 Save & Exit Setup Menu .............................................................................. 102
12.3 The uEFI Shell .......................................................................................... 103
12.3.1 Introduction, Basic Operation ..................................................................... 103
12.3.1.1 Entering the uEFI Shell ...............................................................................103
12.3.1.2 Exiting the uEFI Shell .................................................................................103
12.3.2 Kontron-Specific uEFI Shell Commands .......................................................... 104
12.4 uEFI Shell Scripting................................................................................... 106
12.4.1 Startup Scripting ...................................................................................... 106
12.4.2 Create a Startup Script ............................................................................... 106

D R A F T — F O R I N T E R N A L U S E O N L Y
7
www.kontron.com
User Guide
CP3004-SA
12.4.3 Examples of Startup Scripts......................................................................... 106
12.4.3.1 Automatic Booting from USB Flash Drive .........................................................106
12.4.3.2 Execute Shell Script on Other Harddrive ..........................................................106
12.4.3.3 Enable Watchdog and Control PXE Boot ...........................................................106
12.4.3.4 Handling the Startup Script in the SPI Boot Flash ..............................................107
12.5 Updating the uEFI BIOS.............................................................................. 108
12.5.1 Updating Procedure .................................................................................. 108
12.5.2 uEFI BIOS Recovery ................................................................................... 108
12.5.3 Determining the Active Flash....................................................................... 108

D R A F T — F O R I N T E R N A L U S E O N L Y
8
www.kontron.com
User Guide
CP3004-SA
Tables
1 CP3004-SA Main Specifications ............................................................................. 17
2 Standards ........................................................................................................ 21
3 Related Publications ........................................................................................... 22
4 Features of the Processors Supported on the CP3004-SA ............................................. 23
5 System Status LEDs Function ................................................................................ 26
6 General Purpose LEDs Function ............................................................................. 26
7 POST Code Sequence ........................................................................................... 27
8 POST Code Example ............................................................................................. 27
9 CompactPCI Connector J1 System Slot Pinout ........................................................... 32
10 CompactPCI Connector J1 Peripheral Slot Pinout ....................................................... 33
11 CompactPCI Connector J2 Pinout (CP3004-SA Front I/O Vers.) ...................................... 34
12 Rear I/O CompactPCI Connector J2 Pinout (CP3004-SA Rear I/O Vers.) ........................... 36
14 GPIO Signal Description ....................................................................................... 37
13 CompactPCI Rear I/O Connector J2 Signals ............................................................... 37
15 COMA and COMB Signal Description ........................................................................ 38
16 GPIO Signal Description ....................................................................................... 38
17 VGA Signal Description ........................................................................................ 39
18 Gigabit Ethernet Signal Description ........................................................................ 40
19 SATA Signal Description ...................................................................................... 40
20 USB Signal Description ........................................................................................ 41
21 Power Supply and Power Management Signal Description ............................................ 41
22 DIP Switch SW1 Functionality ................................................................................ 42
23 CP3004-SA-Specific Registers ............................................................................... 43
24 Status Register 0 (STAT0) ..................................................................................... 44
25 Status Register 1 (STAT1) ..................................................................................... 45
26 Control Register 0 (CTRL0) ................................................................................... 46
27 Control Register 1 (CTRL1) ................................................................................... 47
28 Device Protection Register (DPROT) ........................................................................ 48
29 Reset Status Register (RSTAT) ............................................................................... 49
30 Board Interrupt Configuration Register (BICFG) ........................................................ 50
31 Status Register 2 (STAT2) ..................................................................................... 51
32 Board ID High-Byte Register (BIDH) ....................................................................... 52
33 Board and PLD Revision Register (BREV) .................................................................. 52
34 Geographic Addressing Register (GEOAD) ................................................................ 52
35 Watchdog Timer Control Register (WTIM) ................................................................. 53
36 Board ID Low-Byte Register (BIDL) ........................................................................ 55
37 LED Configuration Register (LCFG) ......................................................................... 55
38 LED Control Register (LCTRL) ................................................................................ 56
39 General Purpose Output Register (GPOUT) ................................................................ 57
40 General Purpose Input Register (GPIN) .................................................................... 57
41 DC Operational Input Voltage Range ....................................................................... 58
42 CP3004-SA Power Consumption ............................................................................. 59
43 Power Consumption of CP3004-SA Accessories .......................................................... 59
44 XMC Module Current ............................................................................................ 60
45 CP3004-HDD Module Specifications ........................................................................ 64

D R A F T — F O R I N T E R N A L U S E O N L Y
9
www.kontron.com
User Guide
CP3004-SA
46 Serial Port Connector J8 Pinout ............................................................................. 70
47 CP3004-XMC Module Specifications ........................................................................ 71
48 CP-RIO3-04 Rear Transition Module Specifications ..................................................... 76
49 Serial Port Connectors J2 (COMB) and J3 (COMA) Pinout ............................................. 80
50 Peripheral Control Connector J13 Pinout ................................................................. 81
52 Rear I/O Signal Description .................................................................................. 83
51 Rear I/O CompactPCI Connector rJ2 Pinout .............................................................. 83
53 SATA Flash Module Specifications .......................................................................... 84
54 Smart Extension Module Specifications ................................................................... 85
55 Navigation ....................................................................................................... 97
56 Main Setup Menu Sub-Screens and Functions ............................................................ 98
57 Advanced Setup Menu Sub-Screens and Functions ..................................................... 99
58 Security Setup Menu Functions .............................................................................101
59 Modes of Security ..............................................................................................101
61 Save & Exit Setup Menu Sub-Screens and Functions ..................................................102
60 Boot Setup Menu Sub-Screens and Functions ...........................................................102
62 Kontron-Specific uEFI Shell Commands ..................................................................104

D R A F T — F O R I N T E R N A L U S E O N L Y
10
www.kontron.com
User Guide
CP3004-SA
Figures
1 CP3004-SA Functional Block Diagram .................................................................... 14
2 4 HP CP3004-SA Front Panel ................................................................................ 15
3 4 HP CP3004-SA Board Layout (Top View) ............................................................... 16
4 4 HP CP3004-SA Board Layout (Bottom View) .......................................................... 16
5 CPCI Connectors J1/J2 ....................................................................................... 31
6 DIP Switch SW1 ................................................................................................ 42
7 CP3004-SA with Intel® Core™ i7-5700EQ, 2.6 GHz .................................................... 62
8 CP3004-SA with Intel® Core™ i5-4410E, 2.9 GHz ...................................................... 63
9 CP3004-SA with Intel® Core™ i3-4112E, 1.8 GHz ...................................................... 63
10 CP3004-HDD Module Functional Block Diagram ........................................................ 66
11 Front Panel of the 8 HP and 12 HP CP3004-SA with CP3004-HDD Module ........................ 67
12 CP3004-HDD Module Layout for 8 HP Board Version (Top View) .................................... 68
13 CP3004-HDD Module Layout for 12 HP Board Version (Top View) ................................... 68
14 SATA Adapter for 2.5” SATA HDD/SSD (Top view) ...................................................... 69
15 Serial Port Connector J8 ..................................................................................... 70
16 CP3004-XMC Module Functional Block Diagram ........................................................ 72
17 Front Panel of the 8 HP and 12 HP CP3004-SA with CP3004-XMC Module ......................... 73
18 CP3004-XMC Module Layout for 8 HP Board Version (Top View) .................................... 74
19 CP3004-XMC Module Layout for 8 HP Board Version (Bottom View) ............................... 74
20 CP-RIO3-04 4HP and 8HP Front Panels ................................................................... 77
21 4HP CP-RIO3-04 Rear Transition Module Layout ........................................................ 78
22 8HP CP-RIO3-04 Rear Transition Module Layout ........................................................ 79
23 Rear I/O CompactPCI Connector rJ2 ....................................................................... 82
24 SATA Flash Module Layout (Top and Bottom Views) ................................................... 84
25 Smart Extension Module Layout (Top View) ............................................................. 85
26 4 HP CP3004-SA with SATA Flash Module ................................................................. 88
27 4 HP CP3004-SA with Smart Extension Module ......................................................... 88
28 8 HP CP3004-SA with CP3004-HDD Module .............................................................. 89
29 12 HP CP3004-SA with CP3004-HDD Module and SATA Adapter Module ........................... 89
30 8 HP CP3004-SA with CP3004-XMC Module .............................................................. 90
31 Screws Securing the Front Panel and the CP3004-XMC to the CP3004-SA ........................ 92
32 Screws Securing the XMC Module to the CP3004-XMC Extension Module .......................... 93
33 CP3004-SA Board with CP3004-XMC Extension Module and XMC Module .......................... 93
34 CP3004-SA with Front Panel, CP3004-XMC Extension Module and XMC Module ................. 94

D R A F T — F O R I N T E R N A L U S E O N L Y
11
www.kontron.com
User Guide
CP3004-SA
Warranty
This Kontron product is warranted against defects in material and workmanship for the warranty period
from the date of shipment. During the warranty period, Kontron will at its discretion decide to repair
or replace defective products.
Within the warranty period, the repair of products is free of charge as long as warranty conditions are
observed.
The warranty does not apply to defects resulting from improper or inadequate maintenance or handling
by the buyer, unauthorized modification or misuse, operation outside of the product’s environmental
specifications or improper installation or maintenance.
Kontron will not be responsible for any defects or damages to other products not supplied by Kontron
that are caused by a faulty Kontron product.
Proprietary Note
This document contains information proprietary to Kontron. It may not be copied or transmitted by any
means, disclosed to others, or stored in any retrieval system or media without the prior written consent
of Kontron or one of its authorized agents.
The information contained in this document is, to the best of our knowledge, entirely correct. Howev-
er, Kontron cannot accept liability for any inaccuracies or the consequences thereof, or for any liability
arising from the use or application of any circuit, product, or example shown in this document.
Kontron reserves the right to change, modify, or improve this document or the product described here-
in, as seen fit by Kontron without further notice.
Trademarks
This document may include names, company logos and trademarks, which are registered trademarks
and, therefore, proprietary to their respective owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where possible.
Many of the components used (structural parts, printed circuit boards, connectors, batteries, etc.) are
capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with appli-
cable country, state, or local laws or regulations.

D R A F T — F O R I N T E R N A L U S E O N L Y
12
www.kontron.com
User Guide
CP3004-SA
1 Introduction
1.1 Board Overview
The CP3004-SA is a highly integrated 3U CompactPCI® processor board based on the 4th and 5th gener-
ation Intel® Core™ i7/i5/i3 processor in combination with the Intel® QM87 Chipset.
With the powerful, 4th and 5th generation quad-core Intel® Core™ i7, dual-core Intel® Core™ i5 and
dual-core Intel® Core™ i3 processors, the CP3004-SA offers extraordinary performance-per-watt val-
ues and is an ideal backbone for powerful network-intensive applications providing virtualization (VT-
X, VT-D) and highest graphics performance. The new-generation graphics controller has up to 40 exe-
cution units providing OpenCL 1.2 /OpenGL 4.0 and triple independent display support.
The Intel® Advanced Vector Extensions AVX 2.0 enhancements provide a huge performance improve-
ment in floating-point-intensive computations, which are a key part of digital signal and image pro-
cessing applications such as medical imaging and radar or sonar.
Two SODIMM sockets are available on the CP3004-SA to provide up to 16 GB dual-channel, DDR3L
memory with Error Checking and Correction (ECC) running at 1600 MT/s. The graphics controller and
the memory controller are integrated in the processor. Furthermore, an external HDD/SSD and either
a SATA Flash module with up to 32 GB SLC NAND flash memory or a Smart Extension Module (SATA/USB
2.0 adapter) can be integrated onto the CP3004-SA. The board comes with two Gigabit Ethernet ports,
one VGA interface, two COM ports, six SATA interfaces, four USB 2.0 ports, one USB 3.0 port, two Dis-
playPort interfaces, and one x8 PCI Express 2.0 XMC interface. The CP3004-SA provides support for
one 8 HP I/O extension module such as the CP3004-HDD or the CP3004-XMC as well as one rear I/O
module such as the CP-RIO3-04.
The board supports a configurable 32-bit/ 33 MHz (66 MHz on request) PCI/PCI-X hot swap Compact-
PCI interface. When installed in the system slot, the interface is enabled, and when installed in a
peripheral slot, the CP3004-SA is isolated from the CompactPCI bus. The CP3004-SA further provides
safety and security features via a Trusted Platform Module (TPM) 1.2. The board fits into all applica-
tions situated in industrial environments, including I/O intensive applications where only one slot is
available for the CPU, making it a perfect core technology for long-life applications. Components
which have high temperature tolerance have been selected from embedded technology programs, and
therefore offer long-term availability.
Delivering a stable product based on Intel®‘s embedded product line, the CP3004-SA ensures long-
term availability. This eliminates the risk of unplanned design changes and unexpected expensive
application modification. While minimizing deployment risks, the CP3004-SA provides a broad range
of software support to ease the process of product integration and maximize the competitive advan-
tage of meeting the time-to-market window.
The board is offered with various board support packages including Windows, VxWorks and Linux oper-
ating systems. For further information concerning the operating systems available for the CP3004-SA,
please contact Kontron.

D R A F T — F O R I N T E R N A L U S E O N L Y
13
www.kontron.com
User Guide
CP3004-SA
1.2 System Expansion Capabilities
1.2.1 CP3004-HDD Module (8 HP and 12 HP)
The CP3004-HDD module for the 8 HP CP3004-SA version provides various I/O ports. On the front panel,
it includes two DisplayPort connectors, one Gigabit Ethernet port, one USB 3.0 port, and one RS-232
COM port. Onboard ports include one SATA connector for SATA 2.5” HDD or SSD devices as well as a
CFast card socket. As a further extension capability of the CP3004-SA to 12 HP, a SATA adapter module
is available for use in conjunction with the CP3004-HDD module to provide an additional SATA connec-
tor for a 2.5" SATA HDD/ SSD device. The 12 HP CP3004-SA does not provide a CFast card socket.
For further information about the CP3004-HDD module, refer to Chapter 6.
1.2.2 CP3004-XMC Module (8 HP)
The CP3004-XMC module for the 8 HP CP3004-SA version provides one XMC mezzanine interface for sup-
port of one x8, x4 or x1 PCI Express 2.0 XMC module. Support of one XMC module with two x4 or x1 PCI
Express 2.0 interfaces is also provided upon request. In addition, the CP3004-XMC module provides a
socket for CFast memory cards.
For further information about the CP3004-XMC module, refer to Chapter 7.
1.2.3 CP-RIO3-04 Rear I/O Module
The CP-RIO3-04 rear I/O module has been designed for use with the CP3004-SA board from Kontron and
provides comprehensive rear I/O functionality.
For further information about the CP-RIO3-04 rear I/O module, refer to Chapter 8.
1.2.4 SATA Flash Module
The 4 HP CP3004-SA provides support for up to 32 GB of SLC NAND flash memory in combination with
an optional SATA Flash module, which is connected to an onboard connector.
For further information about the SATA Flash module, refer to Chapter 9.
1.2.5 Smart Extension Module
The Smart Extension Module expands the onboard I/O capability and provides one additional SATA ca-
ble connector as well as one USB 2.0 connector thereby facilitating the connection to system-internal
USB and SATA devices.
For further information about the SATA Flash module, refer to Chapter 10.
1.3 Board Diagrams
The following diagrams provide additional information concerning board functionality and component
layout.

D R A F T — F O R I N T E R N A L U S E O N L Y
14
www.kontron.com
User Guide
CP3004-SA
1.3.1 Functional Block Diagram
Figure 1: CP3004-SA Functional Block Diagram

 




  
 
 




 













 










 


 




 







 
 






 
 







 
 







 




 



   

 









 








   








 
   





 





  


   








   





 










 










 

D R A F T — F O R I N T E R N A L U S E O N L Y
15
www.kontron.com
User Guide
CP3004-SA
1.3.2 Front Panel
Figure 2: 4 HP CP3004-SA Front Panel
Note: For information regarding the front panel of the 8 HP or 12 HP CP3004-SA with a CP3004-
HDD module, refer to Chapter 6.
For information regarding the front panel of the 8 HP CP3004-SA with a CP3004-XMC mod-
ule, refer to Chapter 7.
CP3004
0123
TH WD
VGA
SPEED
ACT
SPEED
ACT
System Status LEDs
TH (red/green): Temperature Status
WD (green): Watchdog Status
General Purpose LEDs
LED3..0 (red/green/red+green): General Purpose/POST Code
Note: If the General Purpose LEDs 3..0 are lit red during boot-up,
a failure is indicated before the uEFI BIOS has started.
Integral Ethernet LEDs
ACT (green): Ethernet Link/Activity
SPEED (orange): 1000BASE-T Ethernet Speed
SPEED (green): 100BASE-TX Ethernet Speed
SPEED (off) + ACT on: 10BASE-T Ethernet Speed

D R A F T — F O R I N T E R N A L U S E O N L Y
16
www.kontron.com
User Guide
CP3004-SA
1.3.3 Board Layout
Figure 3: 4 HP CP3004-SA Board Layout (Top View)
Figure 4: 4 HP CP3004-SA Board Layout (Bottom View)
J1
J2
Intel® Core™ i7
Intel®
QM87
Battery
J7A
GbE A
J4
VGA
SATA Flash
Module
Smart Extension
Module
J3
J7B
GbE B
J12 J13
J14
DDR3L SODIMM Sockets
J9 (Ch. B)
J10 (Ch. A)
J6
USB
J5
USB
J8
ON
4321
SW1
TH LED
WD LED
LED0
LED1
LED2
LED3
J15
J11

D R A F T — F O R I N T E R N A L U S E O N L Y
17
www.kontron.com
User Guide
CP3004-SA
1.4 Technical Specification
Table 1: CP3004-SA Main Specifications
FEATURES SPECIFICATIONS
Processor & Chipset
CPU & Graphics Controller The CP3004-SA supports the following 4th and 5th generation processors:
» Quad-core Intel® Core™ i7-5700EQ, 2.6 GHz, 6 MB L3 cache, GT2, Intel® HD
Graphics 5600
» Dual-core Intel® Core™ i5-4410E, 2.9 GHz, 3 MB L3 cache, GT2, Intel® HD
Graphics 4600
» Dual-core Intel® Core™ i3-4112E, 1.8 GHz, 3 MB L3 cache, GT2, Intel® HD
Graphics 4600
PCH Intel® QM87 Chipset
Memory
Main Memory Up to 16 GB, dual-channel DDR3L SDRAM memory with ECC running at 1600 MT/s
on two SODIMM sockets
Flash Memory Two 16 MB SPI boot flash chips for two separate uEFI BIOS images
Up to 32 GB SLC NAND flash memory via an onboard SATA Flash module (SSD)
EEPROM EEPROM with 64 kbit
Interfaces
CompactPCI Compliant with CompactPCI Specification PICMG® 2.0 R 3.0:
» System master operation
» 32-bit / 33 MHz master interface (66 MHz on request)
» 3.3 V or 5 V (universal PCI interface)
» Support for up to seven peripheral slots (7x REQ/GNT signals)
When installed in a peripheral slot, the CP3004-SA is isolated from the Compact-
PCI bus. It receives power from the backplane and supports rear I/O.
CP3004-SA insertion/removal under power:
When installed in a peripheral slot, the CP3004-SA supports hot plugging on the
power interface through a dedicated power controller, but not on the PCI inter-
face.
Hot swapping of peripheral boards controlled by the CP3004-SA:
When installed in the system controller slot, the CP3004-SA supports the hot
swapping of other boards. Individual clocks for each slot and ENUM signal han-
dling are in compliance with the PICMG 2.1 Hot Swap Specification.
The CP3004-SA itself, however, is not hot swappable. When installed in the sys-
tem controller slot, the system must be powered down in order to replace the
board.
Rear I/O The following interfaces are routed to the rear I/O connector J2:
» COMA and COMB, or COMA and GPIO (all ports have 3.3V LVTTL signaling)
»2xUSB2.0
» VGA (analog)
»2xGigabitEthernet
»2xSATA3Gb/s
» System management signals
» Input for 5V standby power
» General purpose signals

D R A F T — F O R I N T E R N A L U S E O N L Y
18
www.kontron.com
User Guide
CP3004-SA
Interfaces
Gigabit Ethernet Two 10 Base-T/100 Base-TX/1000 Base-T Ethernet interfaces based on two Intel®
I210-IT Ethernet controllers with PCI Express 2.1 (2.5GT/s) support, both inter-
faces individually switchable to front I/O or rear I/O:
» Dual RJ-45 connector on the front panel
» Automatic mode recognition (Auto-Negotiation)
» Automatic cabling configuration recognition (Auto-MDI/X)
» Wake-on-LAN support available only on the two interfaces switchable to
front I/O or rear I/O
In addition, one 10 Base-T/100 Base-TX/1000 Base-T Ethernet interface based on
one Intel® 82574L controller is available with the CP3004-HDD module.
USB Five USB ports supporting UHCI (USB 1.1), EHCI (USB 2.0) and XHCI (USB 3.0):
» Two USB 2.0 ports on the front I/O
» Two USB 2.0 ports on the rear I/O interface
» One USB 3.0 port on the CP3004-HDD module
Serial Two 16C550-compatible UARTs:
» COMA available on the 8 HP extension module or on rear I/O
» COMB or GPIO available on rear I/O only
SATA » Six SATA ports, two onboard, two on rear I/O, and two on the 8 HP extension
module
» Data transfer rates up to 600 MB/s
» High-performance RAID 0/1/5/10 functionality on all SATA ports
I/O Expansion
Interfaces
I/O expansion to 8 HP board version via the CP3004-HDD module:
» SATA 6 Gb/s
» CFast (SATA 3 Gb/s)
»USB3.0
»2xDP(DisplayPort)
»COMA
» Reset button and HDD/SSD activity LED
» 10 Base-T/100 Base-TX/1000 Base-T Ethernet (Intel® 82574L controller)
I/O expansion to 12 HP board version via the CP3004-HDD module and the 2.5"
SATA adapter module:
» 2x SATA (SATA 3 Gb/s and SATA 6 Gb/s)
»USB3.0
»2xDP(DisplayPort)
»COMA
» Reset button and HDD/SSD activity LED
» 10 Base-T/100 Base-TX/1000 Base-T Ethernet (Intel® 82574L controller)
I/O expansion to 8 HP board version via the CP3004-XMC module:
» PCI Express x8, x4 or x1
» CFast (SATA 3 Gb/s)
I/O expansion of CP3004-SA via the Smart Extension Module (exceeds 4 HP):
» SATA 3 Gb/s
»USB2.0
Table 1: CP3004-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS

D R A F T — F O R I N T E R N A L U S E O N L Y
19
www.kontron.com
User Guide
CP3004-SA
Sockets
Front Panel Connectors » VGA: 15-pin D-Sub connector, J4
» USB: two 4-pin, type A connectors, J5 and J6
» Ethernet: dual RJ-45 connector, J7A/B
Onboard Connectors » 7-pin, L-form standard SATA connector, J3
» 120-pin, high-speed I/O extension connector, J14
» 60-pin, high-speed I/O extension connector, J8
» SPI extension connector, J11
» 18-pin extension connector for the SATA Flash module (SSD), J12
» JTAG connector, J13
» XDP-SFF (debug) connector, J15
» CompactPCI connectors J1 and J2
» Two 204-pin DDR3L SODIMM sockets, J9 and J10
LEDs
Front Panel LEDs Watchdog and Overtemperature Status LEDs:
» WD (green): Watchdog Status
» TH (red/green): Overtemperature Status
General Purpose LEDs:
» LED0..3 (red/green/red+green): General Purpose / POST Code
Ethernet LEDs:
» ACT (green): Network / Link Activity
» SPEED (green/orange): Network Speed
Switch
DIP Switch One quad DIP switch, SW1, for board configuration
Timer
Real-Time Clock Real-time clock with 256 Byte CMOS RAM; battery-backup available
Watchdog Timer Software-configurable, two-stage Watchdog with programmable timeout set-
tings. The timeout values range from 125 ms to 4096 s.
The Watchdog serves for generating an IRQ and/or a hardware reset.
System Timer The Intel® QM87 Chipset contains three 8254-style counters with fixed uses.
In addition to the three 8254-style counters, the Intel® QM87 Chipset includes
eight individual high-precision event timers that may be used by the operating
system. They are implemented as a single counter each with its own comparator
and value register.
Thermal
Thermal Management CPU and board overtemperature protection is provided by:
» Temperature sensors integrated in the 4th and 5th generation Intel® Core™
i7/i5/i3 processor:
» Up to four temperature sensors for monitoring the processor cores, one
sensor for each core
» One temperature sensor for monitoring the graphics core
» One temperature sensor for monitoring the package die temperature
» One temperature sensor integrated in the Intel® QM87 Chipset for monitor-
ing the chipset
» Specially designed heat sink
Security
TPM Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-based
data and system security
Table 1: CP3004-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS

D R A F T — F O R I N T E R N A L U S E O N L Y
20
www.kontron.com
User Guide
CP3004-SA
Note: For a description of the additional interfaces available on the 8 HP board versions, refer to
Chapter 6, CP3004-HDD Module, and Chapter 7, CP3004-XMC Module, respectively.
Software
uEFI BIOS AMI Aptio®V BIOS firmware based on the uEFI Specification and the Intel Plat-
form Innovation Framework for EFI.
» LAN boot capability for diskless systems (standard PXE)
» Fail-safe recovery in case of a damaged image
» Non-volatile storage of setting in the SPI boot flash (the battery is only re-
quired for the RTC)
» Compatibility Support Module (CSM) providing legacy BIOS compatibility
based on AMI Aptio®V
» Command shell for diagnostics and configuration
» uEFI Shell commands executable from mass storage device in a pre-OS envi-
ronment (open interface)
Operating Systems There are various operating system board support packages available for the
CP3004-SA. For further information, please contact Kontron.
General
Power Consumption See Chapter 4 for details.
Temperature Range Operational: 0°C to +60°C Standard (depending on processor version and
airflow in the system)
-40°C to +85°C Extended (with Intel® Core™ i3-4112E processor
only; the performance may be lowered depending
on the airflow in the system)
Storage: -40°C to +85°C Without hard disk and without battery
Note: When a battery is installed, refer to its operational specifications as this
may limit the operating and storage temperature of the CP3004-SA (see
section "Battery" below).
Note: When additional components are installed, refer to their operational
specifications as this will influence the operational and storage
temperature of the CP3004-SA.
Battery 3.0V lithium battery for RTC with battery socket
Battery type: UL-recognized CR2025
Temperature range:
Operational (load): -20°C to +70°C typical
(refer to the battery manufacturer’s
specifications for exact range)
Storage (no load): -40°C to +70°C typical
Climatic Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 100 mm x 160 mm
3U, 4 HP, CompactPCI compliant form factor
Note: If a Smart Extension Module is installed on the CP3004-SA, the board
exceeds 4 HP.
Board Weight 321 grams (4 HP CP3004-SA with heat sink, front panel, two 8 GB SODIMM mem-
ory modules, and battery, but without extension modules such as the SATA Flash
module or the Smart Extension Module)
Table 1: CP3004-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS