Kontron CP306 User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

Manual ID: 26799
Revision Index: 03
Issue Date: February 9, 2006
CP306
3U CompactPCI
Pentium® M Based CPU Board
CP306-26799-03-060209-ml
User Guide
P R E L I M I N A R Y
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page ii © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
CP306-26799-03-060209-ml
P R E L I M I N A R Y
Revision History
Imprint
Kontron Modular Computers GmbH may be contacted via the following:
MAILING ADDRESS TELEPHONE AND E-MAIL
Kontron Modular Computers GmbH +49 (0) 800-SALESKONTRON
Sudetenstraße 7 [email protected]
D - 87600 Kaufbeuren Germany
For further information about other Kontron Modular Computers products, please visit our
Internet web site: www.kontron.com
Disclaimer
Copyright © 2006 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to
be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron
logo and all other trademarks or registered trademarks are the property of their respective own-
ers and are recognized. Specifications are subject to change without notice.
Publication Title: CP306: 3U CompactPCI Pentium® M Based CPU Board
ID Number: 26799
Rev.
Index Brief Description of Changes Date of Issue
01 Initial issue Oct 2003
02 General update including an additional appendix Aug 2004
03 General update, new lead-free Gigabit Ethernet controller, compli-
ance with RoHS and WEEE
Feb 09, 2006
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page iii
P R E L I M I N A R Y
CP306-26799-03-060209-ml
Table of Contents
Revision History ........................................................................................................ ii
Imprint ....................................................................................................................... ii
Disclaimer ................................................................................................................. ii
Table of Contents ..................................................................................................... iii
List of Tables ............................................................................................................ xi
List of Figures ......................................................................................................... xv
Proprietary Note .................................................................................................... xvii
Trademarks ........................................................................................................... xvii
Environmental Protection Statement ..................................................................... xvii
Explanation of Symbols ....................................................................................... xviii
For Your Safety ...................................................................................................... xix
High Voltage Safety Instructions ........................................................................ xix
Special Handling and Unpacking Instructions ................................................... xix
General Instructions on Usage ........................................................................... xx
Two Year Warranty ................................................................................................. xxi
Chapter 1
1. Introduction ................................................................................................. 1 - 3
1.1 System Overview .................................................................................. 1 - 3
1.2 Board Overview ..................................................................................... 1 - 4
1.2.1 Board Introduction ........................................................................ 1 - 4
1.2.2 Board-Specific Information ........................................................... 1 - 5
1.3 Optional Modules .................................................................................. 1 - 6
1.3.1 CP306-IDE1 Module ..................................................................... 1 - 6
1.3.2 CP-RIO3-03 Rear I/O Module ....................................................... 1 - 6
1.4 System Relevant Information ................................................................ 1 - 6
1.5 Board Diagrams .................................................................................... 1 - 7
1.5.1 Functional Block Diagram ............................................................. 1 - 7
1.5.2 Front Panel ................................................................................... 1 - 8
1.5.3 Board Layouts ............................................................................... 1 - 9
1.6 Technical Specification ...................................................................... 1 - 10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page iv © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
CP306-26799-03-060209-ml
1.7 Kontron Software Support ................................................................... 1 - 14
1.8 Standards ............................................................................................ 1 - 15
1.9 Related Publications ............................................................................ 1 - 16
Chapter 2
2. Functional Description ................................................................................ 2 - 3
2.1 CPU, Memory and Chipset .................................................................... 2 - 3
2.1.1 CPU ............................................................................................... 2 - 3
2.1.2 Memory ......................................................................................... 2 - 5
2.1.3 855GME Chipset Overview ........................................................... 2 - 5
2.1.4 Graphics and Memory Controller Hub (855GME) ......................... 2 - 6
2.1.5 I/O Controller Hub ICH4 ................................................................ 2 - 7
2.2 Peripherals ............................................................................................. 2 - 7
2.2.1 Timer ............................................................................................. 2 - 7
2.2.2 Watchdog Timer ............................................................................ 2 - 7
2.2.3 Battery ........................................................................................... 2 - 8
2.2.4 Reset ............................................................................................. 2 - 8
2.2.5 SMBus Devices ............................................................................. 2 - 9
2.2.6 Thermal Management/System Monitoring .................................... 2 - 9
2.2.7 Serial EEPROM ............................................................................ 2 - 9
2.2.8 FLASH Memory ........................................................................... 2 - 10
2.2.8.1 BIOS FLASH (Firmware Hub) ................................................. 2 - 10
2.2.8.2 CompactFlash Socket ............................................................. 2 - 10
2.2.9 PCI-to-PCI Bridge ....................................................................... 2 - 11
2.3 Board Interfaces .................................................................................. 2 - 12
2.3.1 General Purpose LED Output ..................................................... 2 - 12
2.3.2 USB Interfaces ............................................................................ 2 - 12
2.3.3 Graphics Controller ..................................................................... 2 - 13
2.3.3.1 Video Memory Usage ............................................................. 2 - 13
2.3.3.2 Video Resolution ..................................................................... 2 - 14
2.3.3.3 CRT Interface and Connector J3 ............................................ 2 - 14
2.3.4 Universal Serial Ports (UART) .................................................... 2 - 15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page v
P R E L I M I N A R Y
CP306-26799-03-060209-ml
2.3.4.1 Serial Port Interface COM1 and COM2 .................................. 2 - 15
2.3.4.2 Serial Port Configuration ........................................................ 2 - 15
2.3.5 Ethernet ...................................................................................... 2 - 16
2.3.5.1 Fast Ethernet .......................................................................... 2 - 17
2.3.5.2 Gigabit Ethernet ..................................................................... 2 - 18
2.3.6 EIDE Interface ............................................................................ 2 - 19
2.3.7 CompactPCI Bus Interface ......................................................... 2 - 21
2.3.7.1 CompactPCI Connector Keying .............................................. 2 - 21
2.3.7.2 CompactPCI Connectors J1 and J2 Pinouts .......................... 2 - 22
2.3.8 Optional Rear I/O Interface on CompactPCI Connector J2 ........ 2 - 24
2.3.8.1 Optional Rear I/O Interface on CompactPCI Connector J2 .... 2 - 25
2.3.8.2 Rear I/O Configuration ............................................................ 2 - 27
2.3.9 Extension Connectors J10 and J11 ............................................ 2 - 27
2.3.9.1 I/O Extension Connector J10 .................................................. 2 - 28
2.3.9.2 PCI Extension Connector J11 ................................................ 2 - 28
Chapter 3
3. Installation .................................................................................................. 3 - 3
3.1 Safety Requirements ............................................................................. 3 - 3
3.2 CP306 Initial Installation Procedures .................................................... 3 - 4
3.3 Standard Removal Procedures ............................................................. 3 - 5
3.4 Hot Swap Procedures ........................................................................... 3 - 5
3.5 Installation of CP306 Peripheral Devices .............................................. 3 - 5
3.5.1 CompactFlash Installation ............................................................ 3 - 5
3.5.2 USB Device Installation ................................................................ 3 - 6
3.5.3 Rear I/O Device Installation .......................................................... 3 - 6
3.5.4 Battery Replacement .................................................................... 3 - 6
3.5.5 Hard Disk Installation .................................................................... 3 - 6
3.6 Software Installation .............................................................................. 3 - 7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page vi © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
CP306-26799-03-060209-ml
Chapter 4
4. Configuration ............................................................................................... 4 - 3
4.1 Jumper Description ................................................................................ 4 - 3
4.1.1 CompactFlash Configuration ......................................................... 4 - 3
4.1.2 Clearing BIOS CMOS Setup ......................................................... 4 - 3
4.1.3 Shorting Chassis GND (Shield) to Logic GND .............................. 4 - 3
4.2 Interrupts ................................................................................................ 4 - 4
4.3 Onboard PCI Interrupt Routing .............................................................. 4 - 5
4.4 Memory Map .......................................................................................... 4 - 5
4.4.1 Memory Map for the 1st Megabyte ............................................... 4 - 5
4.4.2 I/O Address Map ........................................................................... 4 - 6
4.5 Special Registers Description ................................................................ 4 - 7
4.5.1 Watchdog ...................................................................................... 4 - 7
4.5.2 Watchdog Trigger .......................................................................... 4 - 7
4.5.3 Watchdog Timer ........................................................................... 4 - 8
4.5.4 Watchdog, CompactPCI Interrupt Configuration Register ............ 4 - 9
4.5.5 I/O Status .................................................................................... 4 - 10
4.5.6 I/O Configuration Register ........................................................... 4 - 11
4.5.7 Board Version ............................................................................. 4 - 12
4.5.8 Hardware Index ........................................................................... 4 - 12
4.5.9 Logic Version .............................................................................. 4 - 12
4.5.10 LED Control ................................................................................. 4 - 13
Chapter 5
5. Phoenix BIOS ............................................................................................. 5 - 3
5.1 The Setup Guide .................................................................................... 5 - 3
5.1.1 Introduction to Setup ..................................................................... 5 - 3
5.1.2 The Main Menu ............................................................................. 5 - 4
5.1.3 The Menu Bar ............................................................................... 5 - 4
5.1.4 The Legend Bar ............................................................................ 5 - 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page vii
P R E L I M I N A R Y
CP306-26799-03-060209-ml
5.1.5 The Field Help Window ................................................................. 5 - 6
5.1.6 The General Help Window ............................................................ 5 - 6
5.1.7 Main Menu Selections .................................................................. 5 - 7
5.1.8 Master and Slave Sub-Menus ...................................................... 5 - 7
5.2 The Advanced Menu ........................................................................... 5 - 10
5.2.1 Advanced Chipset Control .......................................................... 5 - 11
5.2.2 PCI/PNP Configuration ............................................................... 5 - 12
5.2.2.1 PCI/PNP ISA IRQ Resource Exclusion .................................. 5 - 13
5.2.3 Memory Cache ........................................................................... 5 - 14
5.2.4 I/O Device Configuration Menu 4 HP Version ............................ 5 - 16
5.2.5 I/O Device Configuration Menu 8 HP Version ............................ 5 - 18
5.2.6 Keyboard Features ..................................................................... 5 - 21
5.2.7 Miscellaneous ............................................................................. 5 - 22
5.3 The Security Menu .............................................................................. 5 - 23
5.4 The Power Menu ................................................................................. 5 - 24
5.5 Boot Menu ........................................................................................... 5 - 25
5.6 OEM Features Menu ........................................................................... 5 - 27
5.6.1 PC Health ................................................................................... 5 - 29
5.6.2 Watchdog Settings ...................................................................... 5 - 30
5.6.3 Temperature Management ......................................................... 5 - 32
5.6.4 Front-Rear I/O ............................................................................. 5 - 33
5.6.5 System Info ................................................................................. 5 - 34
5.7 The Exit Menu ..................................................................................... 5 - 35
5.7.1 Saving Values ............................................................................. 5 - 35
5.7.2 Exit Discarding Changes ............................................................ 5 - 35
5.7.3 Load Setup Defaults ................................................................... 5 - 36
5.7.4 Discard Changes ........................................................................ 5 - 36
5.7.5 Save Changes ............................................................................ 5 - 36
5.8 PhoenixBIOS Messages ..................................................................... 5 - 37
5.9 Phoenix Phlash16 ............................................................................... 5 - 42
5.9.1 Installation ................................................................................... 5 - 42
5.9.2 Create the Crisis Recovery Diskette ........................................... 5 - 42
5.9.3 Updating the Crisis Recovery Diskette ....................................... 5 - 43
5.9.4 Executing Phoenix Phlash16 ...................................................... 5 - 43
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page viii © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
CP306-26799-03-060209-ml
5.9.4.1 Command Line Mode .............................................................. 5 - 43
5.9.5 JRC JUMPtec® Remote Control ................................................. 5 - 45
5.10 POST Errors and Beep Codes ............................................................ 5 - 46
5.10.1 Recoverable POST Errors .......................................................... 5 - 46
5.10.2 Terminal POST Errors ................................................................. 5 - 46
5.10.3 Test Points and Beep Codes ...................................................... 5 - 46
Chapter 6
6. Power Considerations ................................................................................. 6 - 3
6.1 System Power ........................................................................................ 6 - 3
6.2 CP306 Voltage Ranges ......................................................................... 6 - 3
6.3 Backplane Requirements ....................................................................... 6 - 4
6.4 Power Supply Units ............................................................................... 6 - 4
6.4.1 Voltage Ramp ............................................................................... 6 - 4
6.4.2 Voltage Sequencing Requirements ............................................... 6 - 4
6.4.3 Rise Time Diagram ....................................................................... 6 - 5
6.4.4 Recommended Operating Conditions ........................................... 6 - 5
6.4.5 Supply Voltage Regulation ............................................................ 6 - 6
6.5 Power Consumption of the CP306 .............................................................. 6 - 6
6.5.1 Power Consumption Using Pentium® M and Real Applications ... 6 - 7
6.5.2 Power Consumption Using Pentium® M and Testing Application 6 - 8
6.5.3 Power Consumption Using Celeron® M and Real Applications .... 6 - 9
6.5.4 Power Consumption Using Celeron® M and Testing Application 6 - 10
6.6 Power Consumption of CP306 Accessories ........................................ 6 - 11
6.7 Start-Up Current of the CP306 .................................................................. 6 - 11
Chapter 7
7. System Considerations ............................................................................... 7 - 3
7.1 Thermal Management ............................................................................ 7 - 3
7.1.1 Passive Thermal Regulation ......................................................... 7 - 3
7.1.1.1 CPU Internal Thermal Supervision ........................................... 7 - 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page ix
P R E L I M I N A R Y
CP306-26799-03-060209-ml
7.1.1.2 CPU External Thermal Supervision .......................................... 7 - 4
7.1.1.3 CPU Emergency Thermal Supervision ..................................... 7 - 4
7.1.1.4 Thermal Management Recommendations ............................... 7 - 5
7.1.2 Active Thermal Regulation ............................................................ 7 - 5
7.1.2.1 Heat Sinks ................................................................................ 7 - 5
7.1.2.2 Forced Air Flow ........................................................................ 7 - 6
7.1.2.3 Peripherals ............................................................................... 7 - 8
Annex A
A. CP306-IDE1 ............................................................................................... A - 3
A.1 Overview ............................................................................................... A - 3
A.2 Technical Specifications ........................................................................ A - 3
A.3 CP306-IDE1 Module Functional Block Diagram ................................... A - 4
A.4 CP306-IDE1 Module Front Panel .......................................................... A - 5
A.5 CP306-IDE1 Module Layout ................................................................. A - 6
A.5.1 CP306-IDE1 Module Layout ......................................................... A - 6
A.6 Module Interfaces (Front Panel and Onboard) ...................................... A - 7
A.6.1 Keyboard/Mouse Interface ............................................................ A - 7
A.6.1.1 Keyboard Connector CON6 Pinout .......................................... A - 8
A.6.2 Universal Serial Ports (UART) ...................................................... A - 8
A.6.2.1 Serial Port Connectors CON2 and CON5 Pinouts ................... A - 9
A.6.2.2 Serial Port Configuration ........................................................ A - 10
A.6.3 Parallel Port Interface ................................................................. A - 10
A.6.3.1 Parallel Port Connector CON1 Pinout .................................... A - 12
A.6.4 EIDE Interface (Secondary Port) ................................................ A - 12
A.6.4.1 Onboard EIDE Connector CON4 Pinout ................................ A - 15
A.6.4.2 EIDE Connectors CON3 and CON9 Pinouts .......................... A - 16
A.6.5 Floppy Drive Interface ................................................................. A - 17
A.6.6 I/O Extension Interface Connector CON10 ................................. A - 19
A.6.7 Speaker Connector J3 ................................................................ A - 19
A.6.8 Reserved Jumpers ...................................................................... A - 19
A.7 Jumper Description ............................................................................. A - 20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page x © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
CP306-26799-03-060209-ml
A.7.1 Shorting Chassis GND (Shield) to Logic GND ........................... A - 20
A.7.2 Serial Port Setting ...................................................................... A - 20
A.7.2.1 RS422 and RS485 COM1 Termination .................................. A - 21
A.7.2.2 RS422 and RS485 COM2 Termination .................................. A - 21
Annex B
B. CP-RIO3-03 Rear I/O ................................................................................. B - 3
B.1 Overview ............................................................................................... B - 3
B.2 Front Panels ......................................................................................... B - 4
B.3 Module Layout: 4HP and 8HP Versions ............................................... B - 5
B.4 Module Interfaces ................................................................................. B - 6
B.4.1 USB Interfaces ............................................................................. B - 6
B.4.1.1 USB Connectors CON3/CON4 Pinout .................................... B - 6
B.4.2 VGA Interface ............................................................................... B - 7
B.4.2.1 VGA Connector CON6 Pinout .................................................. B - 7
B.4.3 Fast Ethernet Interface ................................................................. B - 8
B.4.3.1 RJ45 Connector CON2 Pinout ................................................. B - 8
B.4.4 Serial Port Interfaces .................................................................... B - 8
B.4.4.1 Serial Port Connectors CON8 and CON10 Pinouts ................. B - 9
B.4.5 Fan Control Interface (Optional) ................................................... B - 9
B.4.5.1 Fan Control Connector CON9 Pinout ...................................... B - 9
B.4.6 EIDE Interface .............................................................................. B - 9
B.4.6.1 EIDE Connector CON7 Pinout ................................................. B - 9
B.4.7 Rear I/O interface on Compact PCI Connector CON1 ............... B - 11
B.5 Jumper Setting .................................................................................... B - 13
B.5.1 COM Port Configuration ............................................................. B - 13
B.5.1.1 COM1 Configuration .............................................................. B - 13
B.5.1.2 COM2 Configuration .............................................................. B - 13
B.5.2 Shorting Chassis GND (Shield) to Logic GND ........................... B - 13
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page xi
P R E L I M I N A R Y
CP306-26799-03-060209-ml
List of Tables
1-1 System Relevant Information ................................................................... 1 - 6
1-2 CP306 4HP Version Main Specifications ............................................... 1 - 10
1-1 Standards ............................................................................................... 1 - 15
1-2 Related Publications ............................................................................. 1 - 16
2-1 Supported Intel® Pentium® M Processors on the CP306 ....................... 2 - 4
2-2 Maximum Power Dissipation of Intel® Pentium® M (CPU only) .............. 2 - 4
2-3 Intel® Pentium® M Core Voltage in the Various Frequency Modes ........ 2 - 4
2-4 Supported Intel® Celeron® M Processors on the CP306 ........................ 2 - 5
2-5 Maximum Power Dissipation of Intel® Celeron® M (CPU only) .............. 2 - 5
2-6 SMBus Device Addresses ....................................................................... 2 - 9
2-7 EEPROM Address Map ........................................................................... 2 - 9
2-8 CompactFlash Connector J8 Pinout ...................................................... 2 - 11
2-9 USB Connectors J4 and J5 Pinout ........................................................ 2 - 13
2-10 Partial List of Display Modes Supported ................................................ 2 - 14
2-11 CRT Connector J3 Pinout ...................................................................... 2 - 15
2-12 COM Port Configuration Matrix .............................................................. 2 - 15
2-13 RJ45 Connector J6-A Pinout ................................................................. 2 - 17
2-14 Pinouts of J6-B Based on the Implementation ....................................... 2 - 18
2-15 J7 (Secondary EIDE) Pinout .................................................................. 2 - 20
2-16 Coding Key Colors ................................................................................ 2 - 21
2-17 CompactPCI Bus Connector J1 Pinout ................................................. 2 - 22
2-18 64-bit CompactPCI Bus Connector J2 Pinout ....................................... 2 - 23
2-19 Rear I/O CompactPCI Bus Connector J2 Pinout ................................... 2 - 25
4-1 CompactFlash Configuration ................................................................... 4 - 3
4-2 Clearing BIOS CMOS Setup .................................................................... 4 - 3
4-3 Shorting Chassis GND (Shield) to Logic GND ......................................... 4 - 3
4-4 Interrupt Setting ....................................................................................... 4 - 4
4-5 PCI Interrupt Routing ............................................................................... 4 - 5
4-6 Memory Map for the 1st Megabyte .......................................................... 4 - 5
4-7 I/O Address Map ...................................................................................... 4 - 6
4-8 Watchdog Timer ....................................................................................... 4 - 8
4-9 Watchdog, CompactPCI Interrupt Configuration Register ....................... 4 - 9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page xii © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
CP306-26799-03-060209-ml
4-10 I/O Status Register ................................................................................. 4 - 10
4-11 I/O Configuration Register ..................................................................... 4 - 11
4-12 Board ID Register .................................................................................. 4 - 12
4-13 Hardware Index Register ....................................................................... 4 - 12
4-14 Logic Version Register .......................................................................... 4 - 12
4-15 LED Control Register ............................................................................ 4 - 13
5-1 The Menu Bar ........................................................................................... 5 - 4
5-2 The Legend Bar ........................................................................................ 5 - 5
5-3 Main Menu Selections .............................................................................. 5 - 7
5-4 Master/Slave Sub-Menu Options ............................................................. 5 - 9
5-5 Advanced Chipset Control Options ........................................................ 5 - 11
5-6 PCI/PNP Configuration Options ............................................................. 5 - 12
5-7 PCI/PNP ISA IRQ Resource Exclusion Options ..................................... 5 - 13
5-8 Memory Cache Configuration Options ................................................... 5 - 15
5-9 I/O Device Configuration Options 4 HP Version ..................................... 5 - 17
5-10 I/O Device Configuration Options 8 HP Version ..................................... 5 - 19
5-11 Keyboard Features Options ................................................................... 5 - 21
5-12 Miscellaneous Options ........................................................................... 5 - 22
5-13 Security Menu Options ........................................................................... 5 - 23
5-14 Power Menu Options .............................................................................. 5 - 24
5-15 OEM Features Options ........................................................................... 5 - 28
5-16 SpeedStep Frequency Table .................................................................. 5 - 29
5-17 Watchdog Settings Options .................................................................... 5 - 31
5-18 Temperature Management Options ........................................................ 5 - 32
5-19 Front-Rear I/O Options ........................................................................... 5 - 33
5-20 System Info Options ............................................................................... 5 - 34
5-21 COM Ports Pinout ................................................................................... 5 - 45
5-22 Checkpoint and Beep Codes .................................................................. 5 - 47
6-1 Absolute Maximum Ratings ...................................................................... 6 - 3
6-2 DC Operational Input Voltage Ranges ..................................................... 6 - 3
6-3 Input Voltage Characteristics .................................................................... 6 - 5
6-4 Power Consumption BIOS Pentium® M ................................................... 6 - 7
6-5 Power Consumption Win 2000 IDLE Mode Pentium® M ......................... 6 - 7
6-6 Power Consumption Win 2000 100% CPU Usage Pentium® M .............. 6 - 7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page xiii
P R E L I M I N A R Y
CP306-26799-03-060209-ml
6-7 Power Consumption Win 2000 3D Mark Benchmark Pentium® M .......... 6 - 7
6-8 Power Consumption Win 2000 High Power Tool Pentium® M ................ 6 - 8
6-9 Power Consumption BIOS Celeron® M ................................................... 6 - 9
6-10 Power Consumption Win 2000 IDLE Mode Celeron® M ......................... 6 - 9
6-11 Power Consumption Win 2000 100% CPU Usage Celeron® M .............. 6 - 9
6-12 Power Consumption Win 2000 3D Mark Benchmark Celeron® M .......... 6 - 9
6-13 Power Consumption Win 2000 High Power Tool Celeron® M ............... 6 - 10
6-14 Power Consumption Table for CP306 Accessories ............................... 6 - 11
6-15 Start-Up Current of the CP306 with Pentium® M Processors ............... 6 - 11
6-16 Start-Up Current of the CP306 with Celeron® M Processors ................ 6 - 11
A-1 CP306-IDE1 Module Main Specifications ................................................ A - 3
A-2 Keyboard Connector CON6 Pinout .......................................................... A - 8
A-3 Serial Port Connectors CON2 and CON5 Pinouts ................................... A - 9
A-4 26-Pin MDR Connector Pinout ............................................................... A - 12
A-5 Pinout of the AT 44-Pin Connector ........................................................ A - 15
A-6 Pinouts of EIDE Connectors CON3 and CON9 ..................................... A - 16
A-7 Floppy Drive Connector CON7 Pinout ................................................... A - 18
A-8 Shorting Chassis GND (Shield) to Logic GND ....................................... A - 20
A-9 Jumper Setting to Configure COM1 ....................................................... A - 20
A-10 Jumper Setting to Configure COM2 ....................................................... A - 20
A-11 Jumper Settings for RS422 RXD Termination (COM1) .......................... A - 21
A-12 Jumper Settings for RS422 TXD and RS485 Termination (COM1) ....... A - 21
A-13 Jumper Settings for RS422 RXD Termination (COM2) .......................... A - 21
A-14 Jumper Settings for RS422 TXD and RS485 Termination (COM2) ....... A - 21
B-1 USB Connector CON3/CON4 Pinout ....................................................... B - 6
B-2 VGA Connector CON6 Pinout .................................................................. B - 7
B-3 RJ45 Connector CON2 Pinout ................................................................. B - 8
B-4 Serial Port Connectors CON8 and CON10 Pinouts ................................. B - 9
B-5 Fan Control Connector CON9 Pinout ...................................................... B - 9
B-6 Pinout of AT Standard EIDE Connector CON7 ...................................... B - 10
B-7 Rear I/O CompactPCI Bus Connector CON1 Pinout ............................. B - 11
B-8 COM1 Configuration using Jumper J3 ................................................... B - 13
B-9 COM2 Configuration using Jumper J2 ................................................... B - 13
B-10 Shorting Chassis GND (Shield) to Logic GND ....................................... B - 13
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page xiv © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
This page has been intentionally left blank.
CP306-26799-03-060209-ml
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page xv
P R E L I M I N A R Y
CP306-26799-03-060209-ml
List of Figures
1-1 CP306 Functional Block Diagram ............................................................ 1 - 7
1-2 CP306 4HP Front Panel .......................................................................... 1 - 8
1-3 CP306 Board Layout (Front View) ........................................................... 1 - 9
1-4 CP306 Board Layout (Reverse View) ...................................................... 1 - 9
2-1 855GME Chipset Functional Block Diagram ............................................ 2 - 6
2-2 CompactFlash Socket Connector J8 ..................................................... 2 - 10
2-3 USB Connectors J4 and J5 .................................................................... 2 - 12
2-4 D-SUB CRT Connector J3 ..................................................................... 2 - 14
2-5 Dual Fast Ethernet Connector J6 .......................................................... 2 - 16
2-6 Fast Ethernet Controller J6-A ................................................................ 2 - 17
2-7 EIDE Interface Connector J7 ................................................................. 2 - 20
2-8 CPCI Connectors J1/J2 ......................................................................... 2 - 21
2-9 Extension Connectors J10 and J11 ....................................................... 2 - 28
5-1 Main Menu - Screen Display .................................................................... 5 - 4
5-2 Master/Slave Sub-Menu - Screen Display ............................................... 5 - 8
5-3 Advanced Menu - Screen Display .......................................................... 5 - 10
5-4 Advanced Chipset Control - Screen Display .......................................... 5 - 11
5-5 PCI/PNP Configuration - Screen Display ............................................... 5 - 12
5-6 PCI/PNP ISA IRQ Resource Exclusion - Screen Display ...................... 5 - 13
5-7 Memory Cache - Screen Display ........................................................... 5 - 14
5-8 I/O Device Configuration Menu 4 HP Version - Screen Display ............ 5 - 16
5-9 I/O Device Configuration Menu 8 HP Version - Screen Display ............ 5 - 18
5-10 Keyboard Features Menu - Screen Display .......................................... 5 - 21
5-11 Miscellaneous Menu - Screen Display .................................................. 5 - 22
5-12 Security Menu - Screen Display ............................................................. 5 - 23
5-13 Power Menu - Screen Display ............................................................... 5 - 24
5-14 Boot Menu - Screen Display .................................................................. 5 - 25
5-15 OEM Features Menu - Screen Display .................................................. 5 - 27
5-16 PC Health - Screen Display ................................................................... 5 - 29
5-17 Watchdog Settings - Screen Display .................................................... 5 - 30
5-18 Temperature Management - Screen Display ........................................ 5 - 32
5-19 Front-Rear I/O - Screen Display ........................................................... 5 - 33
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page xvi © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
CP306-26799-03-060209-ml
5-20 System Info - Screen Display ................................................................ 5 - 34
5-21 Exit Menu - Screen Display .................................................................... 5 - 35
6-1 Voltage Ramp of the CP3-SVE180 AC Power Supply ............................. 6 - 5
7-1 Mobile Pentium® M Temperature Vs. Airspeed Graph. ............................... 7 - 6
7-2 Mobile Celeron® M Temperature Vs. Airspeed Graph ................................. 7 - 7
A-1 CP306IDE1 Module Functional Block Diagram ....................................... A - 4
A-2 CP306-IDE1 Module Front Panel ............................................................ A - 5
A-3 CP306-IDE1 Module Layout (Front Side) ................................................ A - 6
A-4 CP306-IDE1 Module Layout (Reverse Side) ........................................... A - 6
A-5 Keyboard/Mouse Connector .................................................................... A - 7
A-6 Adapter for Connecting Mouse/Keyboard via PS/2 ................................. A - 7
A-7 PC-Compatible D-SUB Serial Interface Connectors CON2 and CON5 .. A - 9
A-8 Serial Port Configuration Diagram ......................................................... A - 10
A-9 PC-Compatible Parallel Interface Connector CON1 ............................... A - 11
A-10 Front Side EIDE Interface Connectors CON3 and CON4 .................... A - 13
A-11 Rear Side EIDE Interface Connector CON9 ......................................... A - 13
A-12 Floppy Drive Interface Connector CON7 .............................................. A - 17
A-13 I/O Extension Interface Connector CON10 ........................................... A - 19
B-1 CP-RIO3-03 Front Panels, 4HP and 8HP Versions ................................ B - 4
B-2 CP-RIO3-03 Module Layout, 4HP Version ............................................. B - 5
B-3 CP-RIO3-03 Module Layout, 8HP Version ............................................. B - 5
B-4 USB Connector CON3/CON4 ................................................................. B - 6
B-5 D-SUB VGA Connector ........................................................................... B - 7
B-6 Ethernet/Fast Ethernet Connector ........................................................... B - 8
B-7 PC-Compatible D-SUB Serial Interface ................................................... B - 8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page xvii
P R E L I M I N A R Y
CP306-26799-03-060209-ml
Proprietary Note
This document contains information proprietary to Kontron Modular Computers GmbH. It may
not be copied or transmitted by any means, disclosed to others, or stored in any retrieval sys-
tem or media without the prior written consent of Kontron Modular Computers GmbH or one of
its authorized agents.
The information contained in this document is, to the best of our knowledge, entirely correct.
However, Kontron Modular Computers GmbH cannot accept liability for any inaccuracies or
the consequences thereof, or for any liability arising from the use or application of any circuit,
product, or example shown in this document.
Kontron Modular Computers GmbH reserves the right to change, modify, or improve this doc-
ument or the product described herein, as seen fit by Kontron Modular Computers GmbH
without further notice.
Trademarks
Kontron Modular Computers GmbH, the PEP logo and, if occurring in this manual, “CXM” are
trademarks owned by Kontron Modular Computers GmbH, Kaufbeuren (Germany). In addi-
tion, this document may include names, company logos and trademarks, which are registered
trademarks and, therefore, proprietary to their respective owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where
possible. Many of the components used (structural parts, printed circuit boards, connectors,
batteries, etc.) are capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with
applicable country, state, or local laws or regulations.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface CP306
Page xviii © 2006 Kontron Modular Computers GmbH ID 26799, Rev. 03
P R E L I M I N A R Y
CP306-26799-03-060209-ml
Explanation of Symbols
Caution, Electric Shock!
This symbol and title warn of hazards due to electrical shocks (> 60V)
when touching products or parts of them. Failure to observe the pre-
cautions indicated and/or prescribed by the law may endanger your
life/health and/or result in damage to your material.
Please refer also to the section “High Voltage Safety Instructions” on
the following page.
Warning, ESD Sensitive Device!
This symbol and title inform that electronic boards and their compo-
nents are sensitive to static electricity. Therefore, care must be taken
during all handling operations and inspections of this product, in
order to ensure product integrity at all times.
Please read also the section “Special Handling and Unpacking
Instructions” on the following page.
Warning!
This symbol and title emphasize points which, if not fully understood
and taken into consideration by the reader, may endanger your health
and/or result in damage to your material.
Note ...
This symbol and title emphasize aspects the reader should read
through carefully for his or her own advantage.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CP306 Preface
ID 26799, Rev. 03 © 2006 Kontron Modular Computers GmbH Page xix
P R E L I M I N A R Y
CP306-26799-03-060209-ml
For Your Safety
Your new Kontron product was developed and tested carefully to provide all features neces-
sary to ensure its compliance with electrical safety requirements. It was also designed for a
long fault-free life. However, the life expectancy of your product can be drastically reduced by
improper treatment during unpacking and installation. Therefore, in the interest of your own
safety and of the correct operation of your new Kontron product, you are requested to conform
with the following guidelines.
High Voltage Safety Instructions
Special Handling and Unpacking Instructions
• Do not handle this product out of its protective enclosure while it is not used for opera-
tional purposes unless it is otherwise protected.
• Whenever possible, unpack or pack this product only at EOS/ESD safe work stations.
Where a safe work station is not guaranteed, it is important for the user to be electrically
discharged before touching the product with his/her hands or tools. This is most easily
done by touching a metal part of your system housing.
• It is particularly important to observe standard anti-static precautions when changing
piggybacks, ROM devices, jumper settings etc. If the product contains batteries for RTC
or memory backup, ensure that the board is not placed on conductive surfaces, includ-
ing anti-static plastics or sponges. They can cause short circuits and damage the batter-
ies or conductive circuits on the board.
Warning!
All operations on this device must be carried out by sufficiently skilled
personnel only.
Caution, Electric Shock!
Before installing your new Kontron product into a system always
ensure that your mains power is switched off. This applies also to the
installation of piggybacks.
Serious electrical shock hazards can exist during all installation,
repair and maintenance operations with this product. Therefore,
always unplug the power cable and any other cables which provide
external voltages before performing work.
ESD Sensitive Device!
Electronic boards and their components are sensitive to static elec-
tricity. Therefore, care must be taken during all handling operations
and inspections of this product, in order to ensure product integrity at
all times.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com