Koplus HOP DESK User manual

sit-stand collection - hop sit-stand desk
koplus b.v. | koplus.eu
[email protected]
version200220
Assembly
Instructions.
HOP
DESK
Sit-stand Desk

Before we start, here are some
things to be aware of:
This warranty is made as of ____________________.
To learn more about Koplus standard warranty, please visit www.koplus.eu/warranty for any
updates and/or revisions.
Never spray flammable liquids or aerosol products on or near the motor due to risk
of fire.
Please keep close supervision when the desk is used by, or near children.
DO NOT sit or stand on product due to risk of personal injury.
DO NOT open any electric components due to risk of electric shock.
Make sure that your desk path is cleared of obstacles.
DO NOT place objects taller than 600 mm underneath the tabletop due to risk of
structural damage of desk and physical injuries of users.
Please keep the desk dry. It is intended for indoor use.
Any warranty or liability claims for damages or injuries caused by improper use of
the desk will NOT be accepted.
For sit-stand desks, Koplus warrants to the original purchaser a 5 year warranty on
the structure and a 2 year warranty on the motor, controller, switch, electronics and
all other mechanical parts.
Koplus warranty is limited to replacement or repair and does not cover cost of
transportation and labor. There are no other warranties expressed or implied other
than those specifically described.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 01

Required Tools
Drill Phillips Screw Driver 4mm Allen Key
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 03
A

Part List
Sit-stand Legs Bases Outer Frame - A
Outer Frame - B Inner Frames Side Frames
Control Box Handset
Nº1 Nº2 Nº3-A
Nº3-B Nº4 Nº5
Nº6 Nº7
x2 x1x2
x2 x2x1
x1x1
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 04
Leveling Glides
Nº8
x4

Tool Kit: Screw Pack List
Power Outlet Motor Extension Cord Cable Mount
M6 x 10 M6 x 14 M8 x 35
A B C
D E F
x1 x2x1
x4 x8x16
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 05
ST5 x 16
G
x2 ST5 x 20
H
x7

Step 1.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 06
Nº5
Side Frame
Nº3-A
Outer Frame - A
M6 x 14
Ex2
Installer Tip for Desk Assembly:
If you’re using a drill to assemble, make
sure to check that all screws and/or bolts
are tightly swith a hand held allen key
and/or screw driver.

Step 2.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 07
Nº5
Side Frame
Nº3-B
Outer Frame - B
M6 x 14
Ex2

Step 3.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 08
Nº1
Sit-stand Leg
M6 x 10
Dx4
Nº3-B
Outer Frame - B

Step 4.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 09
Nº1
Sit-stand Leg
M6 x 10
Dx4
Nº3-A
Outer Frame - A

Step 5.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 10
Nº1
Leveling Glides
M8 x 35
Fx4
Nº2
Base
Nº3-B
Outer Frame - B

Step 6.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 11
Nº1
Leveling Glides
M8 x 35
Fx4
Nº2
Base
Nº3-B
Outer Frame - B

M8 x 35
Step 7.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 12
Nº4
Inner Frames

Step 8.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 13
M6 x 10
Dx8
Installer Tip for Telescopic Frame:
Adjust the inner frames to desired width
then fix in place with screws. The desk
frame can be adjusted to fit 1200 - 1800
mm table top.

Step 9.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 14
Motor Extension Cord
Bx1
Nº6
Control Box
Nº7
Handset
Power Outlet
Ax1
Power Outlet
Motor
Handset
Motor

Step 10.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 15
Installer Tip for Control Box:
Make sure to either secure the control box
to the desk frame or screw it on to the
bottom of the table top.

Step 11.
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 16
M5 x 16
Gx2
Installer Tip for Table Top & Wire Management:
Please use part C to mange wires and part H to
attach table top.

Hop Sit-stand Desk
Complete!
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 17
Plug in and start using Hop!
Please read through the controller
intorduction to learn about Hop’s
functions and operations before
you begin.

Functions and Operations
Koplus B.V. | Hop Sit-stand Desk | Assembly Instruction Page 18
LED Display Height Adjustment Memory Setting
Main Menu
1. To access the main menu, press and hold the
button (about 5 seconds) until the menu selection
appears.
2. Use the and buttons to scroll through
the menu.
3. Press on the button to select.
4. To exit the menu, remain inactive for 5 seconds
or select “Return”.
Timer Max/Min Height Handset Lock
Vibration LED Light Return