
Before we start, here are some things to be aware of:
This is the assembly instruction guide for left hand opening
door Milli Sit without sofa.
A packaged Milli Sit unit weights 245 kg and will require
2-3 persons to install. It takes an average of 30 - 45 min to
install Milli Sit.
Please assemble with caution and make sure that the
installation site is protected to prevent any injuries or risks of
damaging the product and surrounding.
Position and assemble Milli Sit as close to its final
placement as possible. If needed, a fully assembled Milli
Sit can be repositioned by retracting its four leveling feet
and moved with its bottom rollers. When moving the unit,
DO NOT push the unit against the rollers’ direction! You
may risk tipping Milli Sit or damaging its rollers.
Make sure you have all the required tools listed (pg. 03).
We recommend leaving at least 30 cm of space between
the wall or between multiple units of Milli Sit.
Make sure that the Milli Sit power source can safely load
10amp. When the ventilation is on, LED light is at its full
lumination, and the power charging station is not in use, the
wattage usage is 14W. The power cord fuse is set at 7amp
to prevent overloading.
Milli Sit comes with 2 AC power outlets and 2 USB
charging outlets. DO NOT plug in any electronic devices
that uses over 5amp.
1.
2.
3.
4.
5.
6.
7.
8.