Koplus MILLI STAND User manual

acoustic collection - milli stand
[right hand open - outlet on right - without stool - type A/B]
koplus b.v. | koplus.eu
[email protected]
version030621
Assembly
Instructions.
MILLI
STAND
Rolling Install

Before we start, here are some things to be aware of:
This is the rolling install instruction for right hand opening door
Milli Stand without stool.
The fully assembled Milli Stand unit weights 235kg and will
require 2-3 persons to install.
Please install with caution and make sure that the installation site is
protected to prevent any injuries or risks of damaging the product
and surrounding.
The fully assembled Milli Stand can be repositioned by retracting
its four levelling feet and moved with its bottom rollers. When
moving the unit, DO NOT push the unit against the rollers’
direction! You may risk tipping Milli Stand or damaging its rollers.
Make sure you have all the required tools listed (pg. 03)
We recommend leaving at least 30cm of space between the wall or
between multiple units of Milli Stand.
Make sure that the Milli Stand power source can safely load
10amp. When the ventilation is on, LED light is at its full lamination,
and the power charging station is not in use, the wattage usage is
14W. The power cord fuse is set at 7amp to prevent overloading.
Milli Stand comes with 2 AC power outlets and 2 USB charging
outlets. DO NOT plug in any electronic devices that uses over
5amp.
1.
2.
3.
4.
5.
6.
7.
8.

8mm Allen Key
A
x1
Door Handle Screw
M4 x 40 mm
Interior Handle
B1
B2
x2
x1 Interior Bezel
B3
x1 Exterior Bezel
Exterior Handle
B4
B5
x1
x1 Floor Tile
C
x1 Power Cord
D
x1
Phillips Screw Driver
Required Tools
Koplus B.V. | Milli Stand | Right Hand Open Door | Outlet on Right | Without Stool | Type A/B Plug | Assembly Instruction - Rolling Install Page 03

Set aside the floor tile
Position and turn the 8mm Allen Key ANTI-CLOCKWISE to disengage the feet
Step 1.
8mm Allen Key
A
Floor Tile
C
Koplus B.V. | Milli Stand | Right Hand Open Door | Outlet on Right | Without Stool | Type A/B Plug | Assembly Instruction - Rolling Install Page 04

cardboard wedge cardboard
Lay down leftover cardboard packaging to protect the bottom edge of Milli Sit
Position the cardboard wedges under the ramp
Roll the Milli Sit off the pallet and onto the cardboard
Roll the Milli Sit off the cardboard and to its destination
Step 2.
Koplus B.V. | Milli Stand | Right Hand Open Door | Outlet on Right | Without Stool | Type A/B Plug | Assembly Instruction - Rolling Install Page 05

8mm Allen Key
A
Step 3.
Position and turn the 8mm Allen Key CLOCKWISE to re-engage the feet and
secure the Milli Sit
Koplus B.V. | Milli Stand | Right Hand Open Door | Outlet on Right | Without Stool | Type A/B Plug | Assembly Instruction - Rolling Install Page 06

8mm Allen Key
A
Floor Tile
C
Step 4.
Store the Allen key in the dedicated notch
Press floor tile into place
Koplus B.V. | Milli Stand | Right Hand Open Door | Outlet on Right | Without Stool | Type A/B Plug | Assembly Instruction - Rolling Install Page 07

Door Handle Screw
M4 x 40 mm
B1
Interior Handle
B2
Interior Bezel
B3Exterior Bezel
B4
Exterior Handle
B5
Step 5.
Install the handle as shown
Koplus B.V. | Milli Stand | Right Hand Open Door | Outlet on Right | Without Stool | Type A/B Plug | Assembly Instruction - Rolling Install Page 08

Step 6.
Plug in Milli Stand and enaure that AC power, USB outlets, light , and fan are
in working order
Koplus B.V. | Milli Stand | Right Hand Open Door | Outlet on Right | Without Stool | Type A/B Plug | Assembly Instruction - Rolling Install Page 09