
Before we start, here are some things to be aware of:
This is the assembly instruction for right hand opening door
Milli Stand without stool.
A packaged Milli Stand unit weights 235 kg and will
require 2-3 persons to install. It takes an average of 30 - 45
min to install Milli Stand.
Please assemble with caution and make sure that the
installation site is protected to prevent any injuries or risks of
damaging the product and surrounding.
Position and assemble Milli Stand as close to its final
placement as possible. If needed, a fully assembled Milli
Stand can be repositioned by retracting its four leveling
feet and moved with its bottom rollers. When moving the
unit, DO NOT push the unit against the rollers’ direction!
You may risk tipping Milli Stand or damaging its rollers.
Make sure you have all the required tools listed (pg. 03).
We recommend leaving at least 30 cm of space between
the wall or between multiple units of Milli Stand.
Make sure that the Milli Stand power source can safely
load 10amp. When the ventilation is on, LED light is at its
full lumination, and the power charging station is not in use,
the wattage usage is 14W. The power cord fuse is set at
7amp to prevent overloading.
Milli Stand comes with 2 AC power outlets and 2 USB
charging outlets. DO NOT plug in any electronic devices
that uses over 5amp.
1.
2.
3.
4.
5.
6.
7.
8.