Kuryakyn 9931 Service manual

CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[e-mail]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the fol-
lowing provisions:
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specic applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the ”CATALOGS” icon. Each Küryakyn™
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and ac-
cessories designed for riders by riders.
©2005 Küryakyn USA™ All Rights reserved.
INSTALLATION
 
609931 1 Catch Tank Assembly, including:
1 LIL Tank, Chrome
1 LIL Tank Inlet Rib, Chrome
1 Rubber Gasket
1 Vent Pipe
1 Oil-Safe Sponge
909931 1 Hardware Kit, including:
1 0.50 ID x 36” Hose
1 SST Universal Strap
1 5/16 – 18 x 1” SHCS Stainless Fastener
1 5/16 – 18 x 3/4” SHCS Stainless Fastener
2 5/16 – 18 High Crown Acorn Nut
2 5/16” Split Lock Washer
2 5/16” Flat Washer
2 3/4” Wire Clamp
4 6” Black Cable Tie
309931 1 Installation Instructions
Please read and understand entire instructions before starting installation.


It is the installers’ responsibility to make sure all fasteners (including pre-assembled) are
tightened before operation of motorcycle. Küryakyn will not warranty components that are
lost due to improper installation. Periodic maintenance may be required.

Allen wrenches
 The universal catch tank can be mounted in a variety of ways. This procedure
outlines two potential ways to mount the catch tank; always orient the catch tank upright
with the vent slots at the top.

Always orient the catch tank upright with the vent slots on top.
Be careful not to lose the o-ring sealing the tank to the cap.
When installing, tighten the tank to the cap securely using an Allen wrench in the hex
cutout in the bottom of the tank.
Check and empty the catch tank regularly to avoid potential overflow. Regularly inspect
the vents for weeping oil. If you find weeping oil, clean the sponge. Unscrew the tank from
the cap using an Allen wrench in the bottom of the tank. Be careful not to lose the o-ring
that seals the tank to the top cap. Squeeze the excess oil from the sponge; you may wash it
with soap and warm water if it is dirty. Be sure to rinse the sponge thoroughly and squeeze
out any excess water. Reinstall the tank to the cap in the reverse order.


9931-12HD-0406




WARNING! Never mount the catch tank where an overflow could deposit oil directly onto a tire. This
could cause loss of control while operating the motorcycle.
The catch tank can be mounted with either the supplied universal strap or a P-Clamp
(sold separately). PIC.1 shows the catch tank mounted to the horn bracket using the
supplied universal strap.
PIC.2 shows the tank mounted to the frame using a Kuryakyn P-Clamp (sold
separately). P-Clamps are available in a variety of sizes to cover many applications.
Ride On!


 






