Kuryakyn 7925 User manual

INSTALLATION
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[e-mail]
or call 715.247.2983
LIMITED WARRANTY
üryakyn warrants that any üryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● üryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
product(s).
●The product must be properly installed,
maintained and operated under
normal conditions.
●üryakyn makes no warranty, expressed or
implied, with respect to any gold plated
products.
●üryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
üryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
üryakyn and a customer.
●üryakyn products are often intended for use in
specific applications. üryakyn makes no
warranty if a üryakyn product is used in
applications other than intended.
●üryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of
üryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●üryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by üryakyn. üryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing üryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: üryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
üryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 üryakyn USA® All Rights
reserved.
PARTS INCLUDED
1 Left Retractable Passenger Peg Assembly
1 Right Retractable Passenger Peg Assembly
1 Hardware it Containing:
1 Left Saddlebag Relocation Bracket
1 Right Saddlebag Relocation Bracket
2 5/16"–18 x 1" Button Socket Cap Screw—B.S.C.S. — Chrome
2 5/16"–18 Low Crown Acorn Nuts — Chrome
4 5/16" I.D. Flat Washers — Chrome
2 Bolt Head Shims
2 Reducer Inserts
2 3/8"–16 NTE Hex Nut — Stainless Steel
2 3/8" I.D. Flat Washer — Zinc
1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN
POTENTIAL DEATH OR SERIOUS INJURY.
ATTENTION! Th s nd cat on alerts you to the fact that gnor ng the contents
descr bed here n may negat vely affect product performance and
funct onal ty.
CAUTION! This indication alerts you to the fact that ignoring the contents
described herein can result in potential injury or material
damage.
TOOLS SUGGESTED
Set of Hex Wrenches, Set of Combination Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1 Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition. Let cool.
WARNING! YOU WILL BE WOR ING AROUND THE ENGINE AND EXHAUST
SYSTEM DURING INSTALLATION. ENSURE THAT THE ENGINE
AND EXHAUST SYSTEM HAVE FULLY COOLED TO PREVENT
INJURY.
RETRACTABLE PASSENGER PEGS FOR SOFTAIL 7925
7925-21HD-0911
-cont.-

PAGE
2
STEP 2 Remove the stock rear footpegs and mounting clevises.
STEP 3 Determine the retractable peg assembly orientation. While the two sides appear
identical, the difference is in the anti-rotation arm, or the “caps” that cover the
ends of the bike’s swing arm pivot shaft. The thick or deep “cap” covers the pivot
shaft NUT on the left side of the bike. The thinner or shallow “cap” covers the pivot
shaft hex head on the right side of the bike. PIC.1 shows the right, or exhaust side
orientation
STEP 4 EVOLUTION MODELS ONLY:
Place the bolt head shims on the RIGHT SIDE swing arm pivot bolt as in PIC.2.
Place the circular reducer inserts in the footpeg mounting holes as shown in PIC.2
and PIC.3.
STEP 5 Place each assembly on the bike so the anti-rotation arms cover the ends of the
swingarm pivot bolts and the mounting holes line up with the mounting holes in
the frame. If the bike is equipped with stock saddlebags, remove the stock rubber
isolated support strap and replace it with the supplied relocation bracket. Position
the saddlebag support relocation brackets as shown in PIC.4. Secure the
retractable peg assembly with the 3/8"–16 x 1-1/4” socket head caps screws, flat
washers and Nylock nuts provided.
ATTENTION! It s the nstaller’s respons b l ty to ensure that all of the fasteners
( nclud ng pre-assembled) are t ghtened before operat on of the
motorcycle. Küryakyn w ll not ssue a warranty on components lost due to
mproper nstallat on. Per od c ma ntenance may be requ red.
STEP 6 Attach the lower front saddlebag mount to the relocation bracket with the
5/16”–18 x 1" B.S.C.S., two flat washers, and acorn nut as shown in PIC.5.
STEP 7 Affix the footpeg of your choice to the foot peg clevises using the 3/8”–16 x 1”
Socket Heads and D-washers provided.
STEP 8 See PIC.6. Lift up on the finger hold and swing the arm to the position that suits
your passenger, then let go of the finger hold and move the arm until it locks into
place.
CAUTION! Do not use the peg on the swinging arm as a step!
STEP 9 Double check the tightness of all fasteners, and re-check periodically.
ATTENTION! It s the nstaller’s respons b l ty to
ensure that all of the fasteners
( nclud ng pre-assembled) are
t ghtened before operat on of the
motorcycle. Küryakyn w ll not ssue a
warranty on components lost due to
mproper nstallat on. Per od c
ma ntenance may be requ red.
RETRACTABLE PASSENGER PEGS INSTALLATION
-cont.-
PIC 1
PIC 2
PIC 3
PIC 4
PIC 5
PIC 6
REDUCER
INSERT
BOLT HEAD
SHIMS

PAGE
3
Ride On!
RETRACTABLE PASSENGER PEGS INSTALLATION