Kwikset 69926-001 User manual

Backset •
69926001 Rev 01
A
L (x2)
or
Installation Guide
23/8" (60 mm)
or
23/4" (70 mm)
13/8"–21/4"*
35 mm–57 mm*
21/8"
54 mm
1"
25 mm
Hold the latch in front of the door hole, with
the latch face lush against the door edge.
Latch Adjustment (only if needed)
Move the pin to
extend the latch.
not centered
centered
23/8" (60 mm)
23/4" (70 mm)
Centerline
13/8" (35 mm)
13/4" (44 mm)
21/4" (57 mm)
Edge of the door
Fold
Drilling Template
Instructions continue on reverse
Template is only needed if a new hole must be drilled in the door.
Face of the door
Door edge chiseled
wood block
slant of latch bolt
faces door frame
slant of latch bolt
faces door frame
door frame
door frame
Remove plates.
Install drive-
in collar.
*Call Kwikset to order
a service kit for 21/4"
(57 mm) thick doors.
Parts in the boxRequired tools
Latch
Screws
Strike
Keys
Knobs
Optional
SmartKey® tool
(SmartKey locks only)
Not required for all
applications
wood block
Additional tools
(if needed)
Allen wrench
If the latch holes are centered in the door hole,
no adjustment is required. Proceed to step 3.
If the latch holes are NOT centered, adjust
latch. See “Latch Adjustment” (step 2C).
Door edge NOT
chiseled
A
A
C
E
D
B
K
G
J
F
H
L
M
N
A
B
A
B
C
Prepare door and check dimensions
1
Adjust the backset of the latch (if needed)
2
Install latch
Instale el pestillo
3
Do not use harsh chemicals or
solvents to clean your lock.
Mechanical lock
Use a damp cloth to wipe away
any excess dirt or debris.
Electronic lock
Use a damp cloth on the lock’s exterior to wipe
away any excess dirt or debris. Use a dry cloth
to clean interior components.

If latch is loose in the strike, adjust
the strike tab so it grips the latch
bolt better when the door is closed.
tab
Close door, test latch operation and make adjustments as needed:
If small bolt of latch enters strike hole, reposition strike.
small bolt in
strike hole
small bolt NOT
in strike hole
WARNING: This Manufacturer advises that no lock can provide complete security by itself. This lock may be
defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute
for caution, awareness of your environment, and common sense. Builder’s hardware is available in multiple
performance grades to suit the application. In order to enhance security and reduce risk, you should consult a
qualiied locksmith or other security professional.
exterior
SmartKey knobs: OK if lipped
Install knob.
Align round edges.
Tip: Pull knob slightly
away from door to see
where screws insert.
Tighten the pre-
installed set screw.
Push up on knob base while
tightening screws to keep latch
horizontal and centered.
Press latch
bolt to install
exterior knob.
If knob won’t
sit lush, rotate
turnbutton to align.
Insert screws and
tighten by hand.
Remove interior Knob.
clockwise
Install interior knob base.
Loosen the pre-installed set screw.
counterclockwise
A
B
D
C
E
F
G
A
B
C
M (x2)
F/ H
N (x2)
K
K
G2/J2
G2/J2
G1/J1
Install strike on door frame
Install knobs
4
5
If you’re looking for quality home doors & windows, visit our website.