LAZER JACKAL User manual

USER MANUAL
JACKAL

The Lazer Jackal helmet comes with
an action camera mount, suitable for
attaching a camera or lights with a
standard GoPro mounting system.
To attach the action camera
mount to the helmet:
1) Thread the Velcro straps
through the top vent as
shown in g.a.
g.a
g.b 2) Then pull the strap up
through the vent next to
it as shown in g.b.
1JACKAL
How to install the action camera mount

g.d
g.c3) Loop the strap through
the action camera mount
as shown in g.c.
4) Pull the strap tight and
x the Velcro to itself as
shown in g.d.
Repeat the steps for the
strap on the other side.
2JACKAL
How to install the action camera mount

3JACKAL
How to access the visor bolts
Jackal has an adjustable visor secured
to the helmet by 2x metal bolts. These
bolts are covered by plastic caps to
retain the clean aesthetic of the helmet.
If the bolts loosen, for example after lots
of vibration due to riding hard on rough
terrain, it may be necessary to tighten
them.
1) To do this, prize the cap o with your
nger nail, or gently with a small at-
headed screwdriver as shown in g.f.
2) When the cover is removed you will
have access to the visor bolts. These
can be tightened clockwise using a
coin, large athead screwdriver or 4mm
hex key as shown in g.g.
g.e
Plastic caps covering the bolts.
g.f g.g

How to use the magnetic buckle
4JACKAL
To open the magnetic buckle, simply
slide the upper part sideways away
from the lower part in the direction of
the arrows in g.h.
The upper part can now be
disconnected from the lower
part as shown in g.i.
To close, simply bring the upper and
lower part close enough to each other
for the magnets to attract each other
together.
g.h
g.i

Thank you for choosing the Lazer helmet. You
have made an excellent choice that will help to
reinforce your safety while cycling: the sport
for which this helmet has been designed.
Lazer helmets conform to the strict criteria of
international standards.
Wearing a helmet may reduce the seriousness
of injuries to the head that may occur during a
sports accident. For this reason, it is important
to use this protective gear properly.
Instructions for use and care:
1) No helmet can protect the wearer against all
possible impacts.
2) The helmet is designed to be retained by a strap
under the lower jaw.
3) To be eective, a helmet must t and be worn
correctly. To check for correct t, place helmet
on head and make any adjustments indicated.
Securely fasten retention system. Grasp the helmet
and try to rotate it to the front and rear. A correctly
tted helmet should be comfortable and should
not move forward to obscure vision or rearward to
expose the forehead.
4) No attachments should be made to the helmet
except those recommended by the helmet
manufacturer.
5) The helmet is designed to absorb shock by
partial destruction of the shell and liner. This
damage may not be visible. Therefore, if subjected
to a severe blow, the helmet should be destroyed
and replaced even if it appears undamaged.
6) The helmet may be damaged and rendered
ineective by petroleum and petroleum products,
cleaning agents, paints, adhesives and the like,
without the damage being visible to the user.
7) A helmet has a limited lifespan in use and should
be replaced when it shows obvious signs of wear.
8) This helmet should not be used by children while
climbing or doing other activities where there is
a risk of hanging or strangulation if the child gets
trapped whilst wearing the helmet.
9) This helmet is designed only for the following
activity: cycling, roller skate, skateboard. It is not
designed to be used with mopeds or any other type
of sport, mechanical or not.
Lamorinièrestraat 33-37
2018 Antwerp - Belgium
www.lazersport.com
Terms and conditions vary by participating markets & resellers,
please check with your local dealer/distributor
for more details.
30-day money back
If you are not completely satised, you can return this for
a replacement Lazer helmet or recieve your money back.
Crash replacement
In the event of a crash, we will replace your damaged
Lazer helmet for a new one. Keep your proof of purchase.
We’ve got you covered!