LAZER Volante User manual

USER MANUAL
VOLANTE

The Lazer Volante helmet has a
magnetic lens which snaps seamlessly
to the helmet itself. To install the lens:
1) First align the front of the lens with
the front vents of the helmet.
g.a.
2) Then push the sides of the lens up to
the helmet so that the magnets attach
the lens securely to the helmet.
g b. shows the lens securely installed
in the correct position:
g.b.
To remove the magnetic lens:
1) First pull the sides of the lens down
away from the helmet in the direction of
the arrows shown in g.c.
2) Then take the lens o the helmet
towards the front as shown in g.d.
1VOLANTE
How to install or remove the magnetic lens
12
g.c. g.d.

2VOLANTE
How to adjust the angle of your helmet
We know what professional cyclists
need from their helmets. That’s why we
have designed a unique t system for
Volante called Turnt®Tilt.
The t system has a ratchet in the top of
the helmet which lets you easily tilt the
helmet forwards or backwards while it’s
on your head.
This lets you angle the helmet to be in
the most aerodynamic position for you.
To adjust the angle of your helmet:
1) First put the helmet on and install the
lens as shown on the previous pages.
2) Take your time to get into your
aerodynamic riding position.
3) Then simply tilt the helmet forwards
or backwards as shown in g.e.
g.e.
Turnt®Tilt allows for
roughly 45° of movement.

Thank you for choosing the Lazer helmet. You
have made an excellent choice that will help to
reinforce your safety while cycling: the sport
for which this helmet has been designed.
Lazer helmets conform to the strict criteria of
international standards.
Wearing a helmet may reduce the seriousness
of injuries to the head that may occur during a
sports accident. For this reason, it is important
to use this protective gear properly.
Instructions for use and care:
1) No helmet can protect the wearer against all
possible impacts.
2) The helmet is designed to be retained by a strap
under the lower jaw.
3) To be eective, a helmet must t and be worn
correctly. To check for correct t, place helmet
on head and make any adjustments indicated.
Securely fasten retention system. Grasp the helmet
and try to rotate it to the front and rear. A correctly
tted helmet should be comfortable and should
not move forward to obscure vision or rearward to
expose the forehead.
4) No attachments should be made to the helmet
except those recommended by the helmet
manufacturer.
5) The helmet is designed to absorb shock by
partial destruction of the shell and liner. This
damage may not be visible. Therefore, if subjected
to a severe blow, the helmet should be destroyed
and replaced even if it appears undamaged.
6) The helmet may be damaged and rendered
ineective by petroleum and petroleum products,
cleaning agents, paints, adhesives and the like,
without the damage being visible to the user.
7) A helmet has a limited lifespan in use and should
be replaced when it shows obvious signs of wear.
8) This helmet should not be used by children while
climbing or doing other activities where there is
a risk of hanging or strangulation if the child gets
trapped whilst wearing the helmet.
9) This helmet is designed only for the following
activity: cycling, roller skate, skateboard. It is not
designed to be used with mopeds or any other type
of sport, mechanical or not.
Lamorinièrestraat 33-37
2018 Antwerp - Belgium
www.lazersport.com
Terms and conditions vary by participating markets & resellers,
please check with your local dealer/distributor
for more details.
30-day money back
If you are not completely satised, you can return this for
a replacement Lazer helmet or receive your money back.
Crash replacement
In the event of a crash, we will replace your damaged
Lazer helmet for a new one. Keep your proof of purchase.
We’ve got you covered!