LAZER Z1 User manual

Z1 LED MUDCAP
Lamorinièrestraat 33-37
2018 Antwerp - Belgium
www.lazersport.com
5. How to change the batteries
1- STILL MODE 2 - FLASHING MODE #1
3 - FLASHING MODE #2
4 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
Turn
1Lift up 2Replace 3
USER MANUAL

USER MANUAL
1. Remove the plastic battery insulation tab prior to use 3. Install the mudcap into the helmet
4. Light mode2. Insert the led into the mudcap
Z1 LED MUDCAP
1- STILL MODE 2 - FLASHING MODE #1
3 - FLASHING MODE #2
4 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
1- STILL MODE 2 - FLASHING MODE #1
3 - FLASHING MODE #2
4 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
1- STILL MODE 2 - FLASHING MODE #1
3 - FLASHING MODE #2
4 - FLASHING MODE #3
5 - OFF
battery
battery insulator
battery
Turn
1
Insert the lower
tongue of the
mudcap into the
groove of the led
1
Insert
1
Press the button
PRESS
3 SECONDS
1
Lift up
2
Gently lift the upper
section of the mud-
cap, whilst rotating
the led into position
2
Push and click in
2
Pull it out
3
The led is now
firmly installed
into the mudcap
3