Leica ST5020 User manual

Instructions for Use
Leica ST5020
Multistainer
Leica ST5020, V 2.0 RevG, English – 07/2016
Order No.: 14 0475 80101 RevG
Always keep these instructions near the instrument!
Read carefully before working with the instrument.

3
Leica ST5020
The information, numerical data, notes and val-
ue judgments contained in this manual repre-
sent the current state of scientific knowledge
and state-of-the-art technology as we under-
stand it following thorough investigation in this
field.
We are under no obligation to update the pre-
sent manual according to the latest technical
developments, nor to provide our customers
with additional copies, updates etc. of this man-
ual.
For erroneous statements, drawings, technical
illustrations etc. contained in this manual we
exclude liability as far as permissible accord-
ing to the national legal system applicable in
each individual case. In particular, no liability
whatsoever is accepted for any financial loss or
consequential damage caused by or related to
compliance with statements or other informa-
tion in this manual.
Statements, drawings, illustrations and other
information as regards contents or techni-
cal details of the present manual are not to be
considered as warranted characteristics of our
products.
These are determined only by the contract pro-
visions agreed between ourselves and our cus-
tomers.
Leica reserves the right to change technical
specifications as well as manufacturing pro-
cesses without prior notice. Only in this way is
it possible to continuously improve the technol-
ogy and manufacturing techniques used in our
products.
This document is protected under copyright
laws. Any copyrights of this document are re-
tained by Leica Biosystems Nussloch GmbH.
Any reproduction of text and illustrations (or
of any parts thereof) by means of print, photo-
copy, microfiche, web cam or other methods –
including any electronic systems and media –
requires express prior permission in writing by
Leica Biosystems Nussloch GmbH.
For the instrument serial number and year of
manufacture, please refer to the name plate at
the back of the instrument.
© Leica Biosystems Nussloch GmbH
NOTE
Leica Biosystems Nussloch GmbH
Heidelberger Str. 17 - 19
D-69226 Nussloch
Germany
Phone: [phone]
Fax: [phone]
Internet: http://www.LeicaBiosystems.com

4Instructions for Use, V2.0, RevG - 07/2016
Table of Contents
1. Important information ............................................................................................................... 6
1.1 Symbols used in this manual and their meaning.............................................................................6
1.2 Designated use .....................................................................................................................................7
1.3 Qualification of personnel...................................................................................................................7
1.4 Instrument type.....................................................................................................................................7
2. Safety ........................................................................................................................................... 8
2.1 Safety instructions ...............................................................................................................................8
2.2 Warnings................................................................................................................................................8
3. Instrument components and specifications ....................................................................... 11
3.1 Overview - Instrument components................................................................................................11
3.2 Instrument specifications .................................................................................................................13
3.3 Standard delivery - packing list .......................................................................................................14
3.4 Technical Data....................................................................................................................................15
3.5 Container system................................................................................................................................17
4. Setting up the instrument ....................................................................................................... 18
4.1 Installation site requirements...........................................................................................................18
4.2 Installing the instrument....................................................................................................................18
4.3 Tap water supply connection...........................................................................................................19
4.4 Installing the oven (optional) ............................................................................................................22
4.5 Connecting the air evacuation hose (optional) .............................................................................25
4.6 Inserting the activated carbon filter................................................................................................26
4.7 Leveling the instrument .....................................................................................................................26
4.8 Electrical connection.........................................................................................................................28
4.9 Alarm functions...................................................................................................................................29
4.10 Transport..............................................................................................................................................29
5. Operation................................................................................................................................... 30
5.1 Switching the instrument on.............................................................................................................30
5.2 Setup checklist ...................................................................................................................................31
5.3 Touch screen functions.....................................................................................................................32
5.3.1 User interface - overview .................................................................................................................32
5.3.2 Data entry ............................................................................................................................................35
5.3.3 Access levels ......................................................................................................................................37
5.3.4 The main menu....................................................................................................................................38
5.4 System SETUP.....................................................................................................................................39
5.4.1 User interface .....................................................................................................................................40
5.4.2 Alarm ....................................................................................................................................................41
5.4.3 Password allocation ..........................................................................................................................43

5
Leica ST5020
Table of Contents
5.4.4 Set date/time .......................................................................................................................................44
5.4.5 Movement............................................................................................................................................45
5.4.6 View and print ..................................................................................................................................... 46
5.4.7 Reagent list..........................................................................................................................................47
5.4.8 Station options ....................................................................................................................................50
5.4.9 Calibration dialog................................................................................................................................51
5.4.10 D ata backup......................................................................................................................................... 52
5.5 Instrument status................................................................................................................................54
5.5.1 Station buttons....................................................................................................................................55
5.5.2 Station types........................................................................................................................................55
5.5.3 Select station type..............................................................................................................................57
5.5.4 Change station type ..........................................................................................................................59
5.6 Staining programs ..............................................................................................................................60
5.6.1 Creating programs..............................................................................................................................61
5.6.2 Defining the program steps ..............................................................................................................62
5.6.3 Assigning a clip color ........................................................................................................................67
5.7 Programs in process..........................................................................................................................69
5.8 Staining ................................................................................................................................................70
5.8.1 Loading the racks ............................................................................................................................... 70
5.8.2 Starting programs...............................................................................................................................71
5.8.3 Interrupting a staining program .......................................................................................................73
5.8.4 Finishing programs.............................................................................................................................74
6. Cleaning and maintenance .................................................................................................... 76
6.1 Cleaning the instrument ....................................................................................................................76
6.2 General maintenance ........................................................................................................................77
6.3 Preventative maintenance schedule ..............................................................................................78
7. Troubleshooting ....................................................................................................................... 79
7.1 General................................................................................................................................................. 79
7.2 Correcting errors ................................................................................................................................79
7.3 Power failure.......................................................................................................................................82
7.4 Replacing the secondary fuses........................................................................................................83
8. Warranty and service.............................................................................................................. 85
9. Appendix ................................................................................................................................... 86
9.1 Container Map ....................................................................................................................................86
9.2 Optional accessories .........................................................................................................................88

6Instructions for Use, V2.0, RevG - 07/2016
1. Important information
1.1 Symbols used in this manual and their
meaning
Warnings
appear in a grey box and are marked by
a warning triangle .
Notes,
i.e. important user information appear
in a grey box and are marked by an in-
formation symbol .
Flammable solvents and reagents are
marked with this symbol.
Instrument surfaces which become hot
during operation are marked with this
symbol.
(5)
Figures in brackets refer to item nos. in
drawings.
ENTER
Function keys to be pressed on the in-
strument touch screen are written in
bold-print capital letters.
The CSA test mark means that a prod-
uct has been tested and fulfills the ap-
plicable safety and/or performance
standards, including the relevant stand-
ards defined or administered by the
American National Standards Institute
(ANSI), Underwriters Laboratories (UL),
the Canadian Standards Association
(CSA), the National Sanitation Founda-
tion International (NSF) and others.
In vitro diagnostics (IVD) medical de-
vice.
Observe the Instructions for Use!
Environmental protection symbol of the
China RoHS directive. The number in
the symbol indicates the "Environment-
friendly Use Period" of the product in
years. The symbol is used if a sub-
stance restricted in China is used in ex-
cess of the maximum permitted limit.
Symbol for labeling electrical and elec-
tronic equipment in accordance with
Section 7 of the German Electrical and
Electronic Equipment Act (ElektroG).
ElektroG is the law regarding the sale,
return and environmentally sound dis-
posal of electrical and electronic equip-
ment.
Indicates the need for the user to con-
sult the instructions for use for impor-
tant cautionary information such as
warnings and precautions that cannot,
for a variety of reasons, be presented
on the medical device itself.
This product fulfills the requirements of
the Council's Directive 98/79/EC con-
cerning in vitro diagnostics (IVD) medi-
cal devices.
Designates the serial number of the in-
strument.

7
Leica ST5020
1. Important information
Order number for standard delivery or
accessories.
Date of Manufacture: Indicates the date
when the medical device was manufac-
tured.
Manufacturer: Indicates the manufac-
turer of the medical product.
1.2 Designated use
The Stainer Leica ST5020 is an automated stain-
er for the preparation of histological and cyto-
logical routine stainings.
It is designed for use in pathology laboratories,
and only for performing the following tasks:
• Stainingofthinsectionsoftissuespecimens
or of cytological samples, attached to micro-
scope slides
• Theinstrumentmaybeoperatedonlyac-
cording to the instructions contained in this
manual.
Any other use of the instrument
is considered improper!
• Theinstrumentmaybeoperatedonlyac-
cording to the instructions contained in this
manual.
Any other use of the instrument
is considered improper!
1.3 Qualification of personnel
• TheLeicaST5020maybeoperatedonlyby
trained laboratory personnel.
• Theinstrumentmaybeoperatedonlyac-
cording to the instructions contained in this
manual.
1.4 Instrument type
All information provided in this manual applies
only to the instrument type indicated on the title
page.
A name plate indicating the instrument serial
number is attached to the back of the instru-
ment.
To prevent damages to the instrument
and specimens, only those accesso-
ries and spare parts which have been
authorized by Leica may be installed or
used with the instrument.

8Instructions for Use, V2.0, RevG - 07/2016
2. Safety
2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis
for accident prevention. Primarily responsible for accident-free operation is above all the in-
stitution which owns the instrument and, in addition, the designated personnel who operates,
services or repairs the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
This instrument has been built and tested in ac-
cordance with the following safety regulations
on electrical measuring, control, regulating and
laboratory devices.
In order to maintain this condition and to en-
sure safe operation, the operator must observe
the instructions and warnings contained in this
Instructions for Use.
For current information about applica-
ble standards, please refer to the CE
declaration of conformity on our Inter-
net site:
www.LeicaBiosystems.com
2.1 Safety instructions
This Instructions for Use includes important in-
formation related to the operating safety and
maintenance of the instrument and it is an im-
portant part of the product.
If additional requirements on accident
prevention and environmental protec-
tion exist in the country of operation,
this Instructions for Use must be sup-
plemented by appropriate instructions
to ensure compliance with such re-
quirements.
Make sure to comply with the safety instructions and warnings in this chapter.
Make sure to read these instructions, even if you are already familiar with the operation and
use of other Leica products.
Material safety data sheets can be obtained from the supplier of the chemicals.
They are also available on the Internet:
http://www.msdsonline.com
The protective devices on both instrument and accessories may neither be removed nor modi-
fied. Only authorized and qualified service personnel may repair the instrument and access the
instrument's internal components.

9
Leica ST5020
2. Safety
Markings on the instrument showing the warning triangle indicate that the correct Instruc-
tions for Use (as defined in this manual) must be followed when operating or replacing the item
marked.
Failure to adhere to these instructions may result in an accident, personal injury, damage to the
instrument or accessory equipment.
Some instrument surfaces, which become hot during operation are marked with this
warning label. Touching these surfaces may cause burns.
Warnings - Markings on the instrument itself
Warnings - Transport and Installation
The instrument may only be transported in an upright position.
Four people are needed to lift / carry the instrument.
Install the instrument on an even laboratory bench which must be absolutely level.
Do not expose the instrument to direct sunlight (windows).
The instrument MUST be connected to an earthed mains power outlet socket. The instrument
must not be connected to an extension cord without protective earth conductor.
The instrument will automatically adjust to the required voltage and frequency at the place of
installation.
If new ovens are installed, they must be adjusted to the voltage and frequency required at the
installation site.
The instrument must be set up in a well ventilated area, free from any ignition sources. The
chemicals to be used in the Leica ST5020 are both flammable and noxious. Do not operate the
instrument in rooms with explosion hazard.
If there is a significant difference in temperature between the warehousing and the installation
site of the instrument and if at the same time there is a high air humidity level, condensation
water may form. In this case, a waiting period of at least two hours must be observed before the
instrument is switched on. Failure to adhere to this waiting period may result in damage to the
instrument.
Warnings -handling reagents
Be careful when handling solvents!
Always wear rubber gloves and safety goggles when handling the chemicals used in this in-
strument.
Reagents used for tissue infiltration can be both toxic and/or flammable.
Dispose of waste solvents with care according to local regulations and the waste management
policy of the company or institution.

10 Instructions for Use, V2.0, RevG - 07/2016
2. Safety
Warnings - Operating the instrument
The Leica ST5020 may only be operated by trained laboratory personnel, according to its desig-
nated use and per the present Instructions for Use.
In case of emergency switch off mains and unplug the power chord.
While working with reagents (filling / emptying the reagent stations, working on the instrument
while the lid/s is/are open) appropriate protective gear (lab coat, gloves, safety goggles) must
be worn.
Make sure to operate the instrument either with the activated carbon filter or with the exhaust
air hose. Even when the instrument is operated according to its designated use, hazardous sol-
vent fumes develop, which are damaging to the operator's health and do also pose a risk of fire!
Risk of fire, when working with an open flame (Bunsen burner) immediately next to the instru-
ment (solvent fumes)! - Therefore, keep a safety distance of 2 meters!
If a staining program is to be interrupted for an extended period of time, do not leave any slide
racks in the tap water stations, in order to prevent them from drying out.
Warnings - Cleaning and maintenance
Prior to each maintenance and/or cleaning, switch the instrument off and disconnect mains
power. Do not clean the instrument with solvents containing acetone or xylene. No liquid may
be spilled into the internal components of the instrument - neither during operation nor during
cleaning.
When working with cleaning detergents, comply with all safety instructions by the manufac-
turer of the product and the laboratory management policy.
Wash the tap water and reagent stations in the dishwasher at a temperature of max. +65 °C
(149 °F). Use a standard detergent for laboratory dishwashers.
At any rate avoid washing the stations at higher temperatures, as the stations may become de-
formed!
Spilled solvents (reagents) have to be wiped away immediately! - In case of long-term expo-
sure, the lid surfaces are only conditionally resistant to solvents!
To clean the lids, control panel and housing, use mild household detergents; - see safety in-
struction above for non-appropriate ingredients!
Caution with sequences which involve an oven at the initial step.
In this case the loading unit, out of which the specimen holder is removed via the transport arm,
must NOT be filled with an inflammable reagent (e.g. xylene).
As the oven temperature is up to 80 °C (176 °F), the reagent may ignite and cause damage to the
device and to the samples.
For the same reason, steps conducted INSIDE an oven must never be carried out from a reagent
station with inflammable reagents.

11
Leica ST5020
3.1 Overview - Instrument components
3. Instrument components and specifications
Fig. 1
Activated
carbon filter Transfer arm Lid
Wash
stations
Single (Double)
carrier
Reagent
container
Color touch
screen
Mains
switch
Slot for
PCMCIA
card
Load
drawer
Exit
drawer
Oven
modules
Transfer to
Coverslipper
Leica CV5030
(optional)

12 Instructions for Use, V2.0, RevG - 07/2016
3. Instrument components and specifications
Rear of instrument
Fig. 3
Fig. 2
Wash
stations
Wash
station
DI-water
Reagent
container
Color touch
screen
Exit drawer Load drawer
Cover for
Oven-Modules
Secondary
fuses
Oven-Modules
Transfer to
Coverslipper
(optional)
Drain
hose
Exhaust
air duct
Drain
outlet
Water inlet
Stations 8-12
DI-Water inlet
Station 7
Fan
electronic
Data
connections
adjustable
foot
Container map
Mains
Power supply
inlet
Power supply
outlet
Power supply
inlet
(electronic)
1 2 3 4 5 6 7 8 9 10 11 12 37 38 39 40
181716151413 2322212019 24
25 29282726 33323130 363534

13
Leica ST5020
3.2 Instrument specifications
 • Highspecimenthroughput(atmaximum12rackssimultaneously)
 • Simultaneouslyprocessingofmultipledifferentprograms
 • ColorTFT-Touchscreen
 • GraphicalandintelligentuserInterface
 • Context-sensitiveOnlineHelp
 • Graphicalprocessrepresentationoncolorscreen.
 • ReagentManagementSystem.
 • Multilingual.
 • Maximumof40stations.
 • Loaddrawerwithmax.4stations.
 • Exitdrawerwithmax.4stations.
 • Maximumof6washstations,2differentwatersourcespossible.
(individually valve-controlled)
 • CodeRackTM Programmable Slide Rack for automatic rack start.
 • OverflowProtector(sensor)instainlesssteelsink.
 • Integratedfumecontrolsystemwithexternalhose/filter.
Optional Accessories
 • Ovenmodulesmax.+65°Candupto4stations.
 • Heatedreagentstations(35-70°Cmax.),max.2,
 • SpecialStainKit.
(modified container with reduced reagent volume and racks).
• SystemupgradeforCoverslipperintegration.
(automated staining and coverslipping without operator interaction).
 • Airevacuationhose.
 • Sliderack(plastic).
 • Adapterforracksfromothermanufacturers.
3. Instrument components and specifications
To prevent damage to the instrument or the specimen, only accessories authorized by Leica may
be used.

14 Instructions for Use, V2.0, RevG - 07/2016
3.3 Standard delivery - packing list
The Leica ST5020 standard delivery consists of the following items:
1 Leica ST5020 basic instrument
31 Reagent vessels, assy. (with handles and lids) 14 0475 33659
5 Wash vessels, assy. 14 0475 33660
2 Activated carbon filter 14 0474 32273
1 Accessory-Kitconsistingoff: 14 0475 39617
1 Jumper cable - mains 14 0411 34604
3 Reagent vessels, assy. (with handles and lids) 14 0475 33659
1 Set of clips, red, pack of 5 14 0475 33637
1 Set of clips, yellow, pack of 5 14 0475 33633
1 Set of clips, white, pack of 5 14 0475 33632
1 Set of clips, light blue, pack of 5 14 0475 33634
1 Set of slide racks 30, plastic, pack of 5 14 0475 33750
1 Waste water hose, 4 m length 14 0475 35748
1 Hose clamp for waste water hose 14 0422 31972
1 Tap water inlet hose, 2.50 m length, assy. with 3/4" connection for water tap 14 0475 32325
1 'V' strainer 3/4"-40/22 A6 (strainer for inlet hose) 14 0456 36101
1 Threaded nippel 14 0474 33063
2 Gaskets for tap water inlet hose 14 0300 00132
1 Box level 14 0475 37629
1 Special O-ring grease for valves and O-rings (OHA), 25 ml 14 0336 36657
1 PCMCIA Flash Card, with adapter 14 0475 42526
1 Tool set:
1 Screw driver 5.5 x 200 14 0170 10702
1 Allen key, size 3.0, with handle 14 0194 04764
1 Allen key, size 4.0, with handle 14 0194 04782
1 Allen key, size 6.0 14 0194 03959
1 Ring-head wrench, size 13 14 0330 37628
1 Single-head wrench, size 17 14 0330 19641
1 Set of replacement fuses:
4 x T 2.0 A 14 6943 02001
2 x T 2.5 A 14 6943 02501
2 x T 4.0 A 14 6943 04001
1 Instructions for Use, printed (German/English, with language CD 14 0475 80001
14 0475 80200)
The country specific power cord needs to be ordered separately. Please find a list of all power cords
available for your device on our website www.LeicaBiosystems.com within the product section.
3. Instrument components and specifications

15
Leica ST5020
3.4 Technical Data
General
Approvals: The instrument-specific marks are located next to the
identification label
Nominal voltage: 100 V - 120 V +/- 10 %
230 V - 240 V +/- 10 %
Nominal frequency: 50 to 60 Hz
Maximum power draw: 1400 VA
IEC 1010 classifications: Protective class 1
Pollution degree 2
Overvoltage installation category II:
 • 800Vimpulse(120Vsystems)
 • 1500Vimpulse(240Vsystems)
Remote alarm relay: 24 V AC/DC, maximum 2 A
Connection:
potential-free contact
(can be operated both as normally open and as normally
closed circuit)
Primary fuses: Fa. Schurter: type FST, mains power inlet 2 x T 8 A
Secondary fuses: Melting fuse, Ø 6.3 x 32 mm
Type: Schurter FST
F1: T 2.0 A
F2: T 2.0 A
F3: T 2.5 A
F4: T 4.0 A
Operatingtemperaturerange: 15°Cto40°C
Relative humidity: 10 % to 80 %, non-condensing
3. Instrument components and specifications

16 Instructions for Use, V2.0, RevG - 07/2016
Dimensions and weight
Basic instrument (W x D x H), in mm: 1060 x 750 x 540
Dry weight, unpacked: approx. 90 kg
Weight, packed: approx. 110 kg
Capacity data
Specimen slide throughput: depending on the program-structure
Loading capacity: max. 12 slide racks (with 12 different Programs)
Slide rack capacity: 30 specimen slides
Total number of stations: 40 (36 + 4 Oven)
Total number of reagent stations: max. 34
Reagent container volume: 450 ml
Number of wash stations: max. 5 and 1 DI-water (optional)
Oven (optional): 2 or 4
Ovenchambertemperature: 40°Cto70°Cor104°Fto158°F
Incubation time setting: 0 sec. up to 23 hours, 59 min., 59 sec.
Load/unload stations: max. each 4, min. each 1
Permanent memory capacity: max. 50 Programs, up to 40 program steps each
Integration: connection to Leica CV5030 Coverslipper (optional)
3. Instrument components and specifications

17
Leica ST5020
3.5 Container system
Reagent container
The Reagent containers can be individually removed for filling.
For use, fill the reagent containers to the line marked on the inside (ap-
prox. 450 ml capacity) and place into position in the instrument consistent
with the programs you wish to run.
Ensure that the reagent containers are correctly seated and that the han-
dles (1) are over to the side and will not obstruct slide rack movement.
Lids (6) are provided to reduce evaporation while the reagent containers
are not in use.
The Load and Exit drawer containers (E25 and L36) can be filled with a
reagent if desired.
However, the instrument will not control the immersion time in these sta-
tions.
Wash stations
The wash system consists of five (optional six) wash stations each ca-
pable of holding one slide rack. Water enters the wash station through a
connection piece (2) in the base and exits from the overflow lip (3) at the
top left hand edge.
Wash stations have a locating pin (4) and can only be inserted
one way. Take care when fitting or removing wash stations as
excessive force may damage the O-ring (5) used as a seal.
Lubricate the O-ring seal before fitting a wash station.
To use the wash system, slowly turn the laboratory tap on fully. The flow
control valve in the Leica ST5020 will limit the total water flow in the wash
stations to 1.6 liters/minute/station.
If the water flow drops below this level for any reason the wash
period specified in the program may have to be extended.
3. Instrument components and specifications
3
1
25
4
6
Fig. 4

18 Instructions for Use, V2.0, RevG - 07/2016
4. Setting up the instrument
4.1 Installation site requirements
• Stable,exactlyhorizontallaboratorybench
with even surface of a minimum width of
1.60 m and minimum depth of 0.80 m.
• Tapwatersupplylocatedamaximumof
2.50 m and waste water drain pipe a maxi-
mum of 2.00 m away from the correspond-
ing in-/outlets at the rear panel of the instru-
ment.
• Iftheinstrumentistobeoperatedwithair
evacuation hose, a fume cupboard at a dis-
tance of maximum 3.50 m from the instru-
ment is required.
Alternative: operation with activated carbon
filter.
• Sufficientspace(approx.0.90m)abovethe
laboratory bench for opening / closing the
instrument lid without any problem.
• Virtuallyvibration-freefloor.
• Stableambienttemperaturebetween+10°C
and+40°C.
• Relativeairhumidityofmaximum80%,non-
condensing.
• Donotplacenearinstrumentswhichmight
be sources of vibration.
The chemicals to be used in the
Leica ST5020 are both flammable and
noxious. The instrument must be set
up in a well ventilated area, free from
any ignition sources.
Do not operate the instrument in
rooms with explosion hazard.
• Tolift,griptheinstrumentbythecarrying
handles (1, Fig. 5).
Four people are required to lift and/
or carry the instrument, as the instru-
ment weighs a total of approx. 95 kg.
• Placetheinstrumentontothebench.
• Unscrewthecarrying handles (remove
screws (2) with Allen key, size 6.0) and store
away.
• Pulloffplasticcover.
• Checkwhetherallaccessorieshavebeen
delivered as per your order.
4.2 Installing the instrument
Fig. 5
1
2

19
Leica ST5020
4.3 Tap water supply connection
Fig. 6
3
Connecting the tap water inlet hose
• Unpackthetapwaterinlethose-mindthetwogaskets(4).
4
56
• Insertonegasket(4) into threaded fitting (6). Store away the remaining
gasket(s).
• Insertstrainer(3) into union nut (5) (see Fig. 6) which is screwed onto
the water tap. Do not insert any further gaskets, as the strainer acts
also as a seal.
7
7
4. Setting up the instrument
Water filter
In addition to the filter sieve supplied (item 3in Fig. 6) Leica recom-
mends installing a sediment filter between the water extraction outlet
and ST5020, to guarantee that the instrument is only operated with clean
water.
This sediment filter should have the following properties:
Filter fineness: 25 µm
Rate of flow: approx. 10 l/min (with 5 wash stations)
Pressure constancy: 10 bar
Connection to the filter output: 1/2" external thread
This filter insert must be checked and cleaned regularly.
If the filter insert is very dirty it must be replaced.

20 Instructions for Use, V2.0, RevG - 07/2016
Fig. 8
Instrument rear panel
water in-/outlets
4. Setting up the instrument
10
11
712
Fig. 7
8
9
10
Instrument rear panel
- tap water inlets
• Screwtapwaterinlethose(7in Fig. 8) for
tap water stations 8 - 12 onto water tap and
insert the other end into inlet (8in Fig. 7).
• Ifstationno.7(Fig. 3) will also be used as
a tap water station, connect a second tap
water inlet hose (optional accessory) to in-
let (9).
Inlet (9) only provides water (or any
other medium supplied via a separa-
te connection) to station no. 7. To use
station 7 as a water station, a wash
vessel must be inserted and station 7
must be defined as a 'tap water' or
'fully-de-ionized water' station (DI
water station) in 'stations options'.
(see also chapter 5.5.3)