Leica GGo4 Instruction Manual

1
Technical Note
(tcpgps_android_en_v10_001_connect_with_leica_gg04_gnss_receiver)
Connect with Leica GG04 GNSS receiver
Update Date
15/09/2017
Requirements
Hardware:
Leica GG04 GNSS recevier
Mobile device with Android OS v4.0.3+ and internal GNSS receiver.
Software:
Leica Zeno Connect v2.5.0.1141+ for Android
TcpGPS v1.0.0+ for Android
Objetive
Conectar TcpGPS para Android con el receptor GNSS Leica GG04 a través de
Leica Zeno Connect.
Details
For connecting TcpGPS with the Leica GG04 GNSS receiver, Leica Zeno
Connect must be set up previously, which works as location provider for third party
apps.
These steps must be followed for setting up both programs:
Go to Settings > Developer Options within the mobile device.
Sumatra, 9 E-29190 Málaga (Spain)
Web: www.aplitop.com
Phone: [phone]
Fax: [phone]

2
Select Leica Zeno Connect in the section Select mock location app.
Go to the main menu.
Turn on the internal GNSS receiver of the mobile device.

3
Run Leica Zeno Connect.
Bound and select the Leica GG04 GNSS receiver in the Antenna section.
Create and set up a profile for receiving real time corrections.
Close Leica Zeno Connect.
Run TcpGPS.

4
Go to Application > Settings and select Internal GNSS receiver in the
Communications section.
Check that TcpGPS is receiving the desired accuracy on the GNSS receiver
status screen. This accuracy must match with the accuracy shown by Leica
Zeno Connect on the notification screen of the mobile device.