
PRODUCT DATA
ODS06
FEATURES
•Fits in standard wallbox and replaces single-pole
wall switch. Gangable with other units.
•Low-profile design eliminates obtrusive appear-
ance. Elegant Decora wallplates complement
any interior for sleek aesthetics; uses Decora
wallplates and coordinates with Leviton’s popu-
lar line of Decora wiring devices.
•180° field-of-view provides approximately 1600
square feet (149 square meters) of coverage
suitable for small offices, conference rooms,
lounges and a variety of commercial areas.
•Convenient pushbutton provides manual-ON/
OFF light switching at any time.
• Two dual element PIR sensors used to widen
detection range.
• Vandal resistant PIR lens.
• Patented Blinders - horizontal field-of-view may
be adjusted between 180° and 180° of arc by
using integral blinders located on either side of
the lens. No masking tape required.
•Manual-ON/Auto-OFF mode for installations
where manual-ON switching is required but
auto-OFF switching is still desired for CA Title 24
energy savings.
•To comply with CA Title 24, red LED indicator
light flashes when sensor detects motion to
verify detection is active.
• Time Delay adjustment for delayed-OFF time
settings of 30 seconds (for walking test), 10
minutes, 20 minutes, and 30 minutes. Allows
customized adjustments to maximize energy
savings.
• Vacancy confirmation - when the time out
expires and the lights turn OFF a 30 second
vacancy confirmation exists to turn the lights
back ON.
• Presentation Mode feature for slide or film pre-
sentations allows push buttons to turn lights
OFF and keep them OFF while the room is occu-
pied.
•One unit can be used for 120-230-277V lighting.
Compatible with LED drivers and electronic and
magnetic ballasts.
• No neutral design is optimal for retrofit applica-
tions.
ODS06
Field-of-View (in feet)
TOP VIEW
SIDE VIEW
15
0
0
15
15
30
30
40
40
4
Minor Motion, IR
Major Motion, IR
5
030
FIELD-OF-VIEW
The ODS06 provides a 180° field-of-view with a
maximum coverage area of approximately 1600
square feet (149 square meters). The maximum
sensing distance in front of the sensor is 30 feet
(3square meters), and at each side is 30 feet. A
“minor motion” zone detects relatively small body
movements and allows the lights to stay ON even
though a person may not be moving or walking
around the room. The remainder of the field-of-
view, the “major motion” zone, exhibits a lesser
degree of sensitivity and requires larger move-
ments.