
Service Manual Viking™ S/XS mobile lift • 3EN380401 Rev. 12 8 www.hill-rom.com lwww.liko.com
3.0 Spare Parts Assembly Informaon
Assembly Instrucons to Liko™ spare parts are aached with the products.
The assembly instrucons are also available on the Partner Web and in Agile (internally).
Document number to spare parts assembly instrucons can be found in the spare parts list.
Liko technical documentaon can be found on the Partnerweb:
hps://partner.liko.com - “My informaon” - “Documents”
If you don’t ha
ve access, send a mail f
or regis
tra
on to: se.cust
omer
[email protected] NOTE
- Always make sure the spare part is mounted according to the assembly instrucon.
- Check all funcons related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom
and using original Liko™ spare parts.
Charger CH01
Assembly Instrucon
Product No. 21090025
3EN650232 Re v. 5
ENGLISH
Contains: Qty:
Charger 1
Adapter plug EU 1
Adapter plug UK 1
Adapter plug US 1
Adapter plug AU 1
Fits:
Caroli mobile li
Capella mobile li
Uno™ 200 mobile li
Sabina™ 200 mobile li
Viking™ S mobile li
Viking™ XS mobile li
Likorall™ 200 overhead li
www.hill-rom.com lwww.liko.com
3.
2. 4.
5.
6.
The li does not operate when the charger cable is plugged into an electric socket!
* Plug adaptor units:
Australian EU
NOTE
- Make sure the spare part is mounted according to the assembly instrucon.
- Check all funcons related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom and using original Liko™ spare parts.
3.
2.
4.
6.
5.
1.
7.
1. Check to ensure that the emergency stop buon is not pressed in during charging.
2. Connect the charger cable to the charger socket under the control unit.
Likorall overhead li: Place the hand control in the charging staon.
3. Slide on the Plug adaptor unit*to the Charging module.
4. Connect the charger to a 100-240 V AC electric socket.
5. When the charger is connected a LED indicates:
- yellow light indicates charging
- green light indicates maintenance charging.
6. A yellow LED at the control unit lights when the charger is connected to the electric socket.
Likorall overhead li: A LED on the hand control will light up and indicates that the charger is
connected to a power source.
7. Likorall overhead li: Charging starts automacally and a yellow LED on the li unit indicates
that the baeries are charging. When the baery is fully charged, the yellow LED turns o.
UK US / Japan
2.
Caroli and Capella mobile lis
Uno, Sabina and Viking mobile lis
Likorall overhead li
© Copyright Liko R&D AB 2015
Document Number
INFORMATION