Lippert Stargazer Spirit XTR User manual

Stargazer Spirit XTR
Acrylic Window
OWNER'S MANUAL

Rev: 09.28.22 Page 2 CCD-0006838
Introduction
The Stargazer Spirit XTR Acrylic Window Skylight allows ventilation and sunshine in while providing privacy.
The inner screen frame options allow for different types of ventilation and guards against pests. The inner
screen assembly is a combination of a flyscreen and shade for the skylight window that can be pulled across
the skylight opening by hand using the two different profiles. The integrated spring shaft tensions the fabric
permanently and gives optimum hold. For information on the assembly or individual components of this
product, please visit: https://support.lci1.com/skylights
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury if not performed safely and within the parameters
set forth in this manual.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the Lippert limited warranty.
Always wear eye protection when performing service, maintenance or installation procedures.
Other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
TABLE OF CONTENTS
Introduction 2
Safety 2
Operation 3
Skylight Open Position 3
Skylight Closed Position 4
Maintenance 5
Notes 5

Rev: 09.28.22 Page 3 CCD-0006838
Always wear eye protection when performing service, maintenance or installation procedures.
Other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
Moving parts can pinch, crush or cut. Keep clear and use caution.
Operation
Fig. 1 Fig. 2
Fig. 3 Fig. 4
A
A
B
A
B
BA
All windows must be fully closed prior to travel. Failure to close windows prior to
travel could result in product and/or property damage.
Skylight Open Position
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may
cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 1A) to slide the screens (Fig. 1B) back into the screen frame
to be able to access the Stargazer Spirit Skylight's five skylight window latches.
2. Press in on the latch button (Fig. 2A) and swing the latch (Fig. 2B) from the closed position (Fig. 2)
to the open position (Fig. 3A).
NOTE: The Stargazer Spirit XTR Acrylic Window Skylight opens to a maximum of 8 degrees. DO NOT force
the skylight window open any farther than it will extend.
3. Push up on the skylight window's handle (Fig. 4A) to open the skylight window.

Rev: 09.28.22 Page 4 CCD-0006838
Skylight Closed Position
Fig. 5 Fig. 6
4. If desired, slide the inner screens (Fig. 5) forward or back into a comfortable position or keep the
screens back in the screen frame to get the maximum air flow from the open skylight window (Fig. 6).
Fig. 7
A
Fig. 8
A
B
B
Fig. 9
A
Fig. 10
A
B
All windows must be fully closed prior to travel. Failure to close windows prior to
travel could result in product and/or property damage.
NOTE: DO NOT rapidly slide the profiles of the screen frame assembly. Rapidly sliding the profiles may
cause damage to the screen frame or ceiling of the unit.
1. If applicable, toggle the screen latch (Fig. 7A) to slide the screens (Fig. 7B) back into the screen frame
to be able to access the Stargazer Spirit Skylight's five skylight window latches.
2. Pull down on the skylight window handle (Fig. 8A) and swing all five open latches (Fig. 9A) to the
closed position (Fig. 10A). The latch button (Fig. 10B) will click into place.
3. If desired, slide the inner screens (Fig. 7B) forward or back to shade the sun.

Rev: 09.28.22 Page 5 CCD-0006838
Notes
Maintenance
Spot clean only the frame with a damp cloth and mild soap.

The contents of this manual are proprietary and copyright protected by Lippert.
Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an
authorized Lippert representative has been provided. Any unauthorized use shall void any applicable warranty.
The information contained in this manual is subject to change without notice and at the sole discretion of Lippert.
Revised editions are available for free download from lippert.com.
Please recycle all obsolete materials.
For all concerns or questions, please contact Lippert.
Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: [email protected]