Lippert Kwikee Step Well Cover User manual

Kwikee® Step Well Cover
OWNER'S MANUAL

Rev: 12.29.22 Page 2 CCD-0001659
TABLE OF CONTENTS
Introduction 2
Safety 3
Operation 3
Extend 3
Retract 4
Notes 5
Introduction
Kwikee® Step Well Covers are designed for front-entry coaches. The step well cover provides comfort and
foot support for the person riding in the passenger seat. The step well cover also provides added user safety
by preventing accidental falls into the entry step well.
The construction of the step well cover consists of three primary parts:
1. Outer Shell – The outer shell connects directly to the chassis of the motor coach and provides the
structural support and environmental protection for the drive mechanism and slider.
2. Step Well Cover – The step well cover is the portion of the assembly that extends and that the user sees
during normal operation.
3. Drive Mechanism – The drive mechanism is responsible for providing the power to drive the slider in
and out.
Additional information about this product can be obtained from lci1.com/support or by downloading the
free LippertNOW app. The app is available on Apple App Store® for iPhone® and iPad® and also on Google
Play™ for Android™ users.
Apple App Store®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/step-well-covers
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ and
some components may not be shown for visual clarity .
Step Well Cover
Extended Step Well Cover
Retracted

Rev: 12.29.22 Page 3 CCD-0001659
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause death
or serious personal injury if not performed safely and within the parameters set forth in this manual.
Failure to act in accordance with the following may result in death or serious personal injury. Read
all operating instructions rst before using your Kwikee® Step Well Cover.
Moving parts can pinch, crush or cut. Keep clear and use caution.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
Operation
Extend
To extend the Step Well Cover:
1. Make sure there are no obstructions in the entry step well (Fig. 1) which will interfere with the
operation of the system.
2. Locate the step well cover rocker switch (Fig. 2) and position yourself fully inside the coach. Do not
stand in the entry step well.
Do not stand on the step well cover during operation.
Fig. 1 Fig. 2

Rev: 12.29.22 Page 4 CCD-0001659
3. Press and hold the rocker switch in the OUT position until the system is fully extended and stops moving.
4. Verify that the step well cover (Fig. 3A) is fully extended by visually checking to see that it is level and
parallel to the main floor and top edge of step well (Fig 3B).
Fig. 3
AB
Retract
To retract the step well cover:
5. Make sure there is nothing laying on top of the step well cover.
6. Locate the step well cover rocker switch (Fig. 2) and position yourself fully inside the coach.
7. Press and hold the rocker switch in the IN position until the step well cover is fully retracted and stops
movement.
8. Verify that the step well cover is fully retracted (Fig. 4A) by visually checking to see that it is flush with
the back part of the step well (Fig. 4B).
Fig. 4
A
B

Rev: 12.29.22 Page 5 CCD-0001659
Notes

The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or
dissemination of portions of this manual unless prior written consent from an authorized Lippert representative
has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this
manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available
for free download from lippert.com.
Please recycle all obsolete materials.
For all concerns or questions, please contact Lippert
Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: [email protected]