Logitech ZONE WIRELESS User manual

LOGITECH ZONE WIRELESS
Setup Guide
Guide d’installation

CONTENTS
English . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . 12
Español . . . . . . . . . . . . . . . . 21
Português . . . . . . . . . . . . . . 30

KNOW YOUR PRODUCT
Microphone boom
Power/Pairing light
indicator
Active Noise
Cancellation (ANC)
Power/Bluetooth®
pairing
USB port for
charging cable
Volume up
Volume down
Mute
USB-C adapter
Light indicator
USB-A receiver
Multi-function
button
Teams/
Multi-function
button
Qi wireless charging area
UC version MSFT Teams version
3English

USB-A USB-C ADAPTER USB-A | USB-C
WHAT’S IN THE BOX
1. Headset
2. USB-A receiver
3. USB-C to A adapter
4. USB-A to C charging cable
5. Travel bag
6. User documentation
POWER ON/OFF
1. Press power button for 1 second.
2. Once powered on, light indicator turns white.
Ifnodevice is connected, it will ash white slowly.
PAIRING VIA BLUETOOTH®
1. Press power button for 2 seconds. Light indicator will
ash white rapidly.
2. Open Bluetooth®settings on your device.
3. Select Zone Wireless in discoverable devices.
4. Once successfully paired, light indicator will turn
solidwhite.
PAIRING VIA USB RECEIVER
1. USB-A
Insert the receiver into the computer USB-A port.
USB-C
Insert the USB-A receiver into the USB-C adapter.
Then insert the adapter into the computer USB-C port.
2. Headset is already paired to the receiver it ships with.
Just power on the headset. Once successfully paired,
the light indicator on the receiver will remain solid
white. Light indicator on the headset will turn solid
white.
Power
USB-C
USB-A
Zone
Wireless
2 sec.
4English

MSFT Teams version
ADJUSTING HEADSET
1. Adjust headset by sliding earcups up and down
theheadband.
2. It may be easier to adjust the headset on your head.
Movethe earcups up and down the headband until
theysit comfortably on your ears.
ADJUSTING THE MICROPHONE BOOM
1. Microphone boom rotates 270 degrees. Wear it on either
left or right side. Audio channel will switchautomatically,
depending on the direction you are wearing
themicrophone.
2. Flexible microphone boom — adjust boom location
tocapture voice better.
HEADSET CONTROLS
TEAMS version
Usage Button Action
Call controls
Answer / End call
Multi-function
Short press
Reject call 2 second press
Resume call Short press
Transfer active call to
other device Short press
Teams activities
Check connection to
teams Short press
Quick access to Teams Short press
Respond to Teams
notications Short press
Trigger Teams voice
skills (Cortana) 2 second press
Media controls
Play / Pause Multi-function Double press
Track forward Multi-function
and “+”Short press
Track backward Multi-function
and “–”Short press
Volume
Volume up “+”Short press
Volume down “–”Short press
Headset
connection and
battery status
Check connectivity
and battery life “+”and “–”Short press
5English

UC version
MUTE
Note:
- Teams activities are only functional when Teams is running on an unlocked computer.
- Media control functionality depends on type of application.
- Call activities are always the rst priority. When two devices are connected, the Bluetooth®connection will
be prioritized over receiver. When two Bluetooth®devices are connected, the last active device will override
the other.
Tip: Button customizations and Music EQ controls available on Logi Tune app.
Mute
Move mic boom
up to mute
Voice notications
indicatewhen
themicrophone is on/
omute
“Mute on”
“Mute o”
Move mic boom
downto unmute
UC version
Usage Button Action
Call controls
Answer / End call
Multi-function
Short press
Reject call 2 second press
Voice assistant Multi-function 2 second press
Media controls
Play / Pause Multi-function Double press
Track forward Multi-function
and “+”Short press
Track backward Multi-function
and “–”Short press
Volume
Volume up “+”Short press
Volume down “–”Short press
Headset status Check connectivity
and battery life “+”and “–”Short press
“ANC on”
“ANC o”
ACTIVE NOISE CANCELLATION (ANC)
ANC blocks out the noise around you to help you
concentrate on the task at hand.
1. Press the ANC button on the side of the earcup.
2. There will be voice notications when turning ANC on
ando. These can be turned o in the Logi Tune app.
6English

Powered on or fully charged
Battery charging
Low battery
Bluetooth®pairing mode
Bluetooth®pairing mode while low
battery
No paired device
No paired device while lowbattery
HEADSET LIGHT INDICATOR
Light Status
White
Solid Powered on or fully charged
Breathing Battery charging
Fast pulsing Bluetooth®pairing mode
Slow pulsing No paired device
Red
Solid Low battery
Fast pulsing Bluetooth®pairing mode while low battery
Slow pulsing No paired device while lowbattery
7English

RECEIVER INDICATOR LIGHT
TEAMS version
Light Status
White
Fast ashing Pairing mode
Solid Paired
Repeat ashing on
and o Incoming call
Purple
Pulsing
Connecting to
Teams/ Teams
notications
Flashing for 10
seconds and o
Failed connection
to Teams
Flashing 3 times
and o
Not connected to
Teams
Solid Connected to
Teams
Red Solid Mute on
UC version
Light Status
White
Fast ashing Pairing mode
Solid Paired
Repeat ashing on
and o Incoming call
Red Solid Mute on
Pairing mode
Paired
Incoming call
Mute on
Mute on
Pairing mode
Paired
Failed connection
toTeams
Incoming call
Connected to Teams
Not connected
toTeams
Connecting to Teams/
Teams notications
x3
10 sec.
8English

www.logitech.com/tune
Headset indicator light
CHARGING
Headset automatically powers o when left idle.
Sleeptimer can be changed in the Logi Tune App.
Headset indicator light will turn RED when battery is low.
Charging via USB cable
1. Plug the USB-C cable end into the USB-C port
onthebottom of the earcup.
2. Plug the USB-A end into the USB-A charging port
onyourcomputer or AC adapter.
3. Indicator light will be a breathing white light
for charging.
4. Indicator light will be solid white when fully charged.
–2hours will fully charge the battery.
– 5 minutes will give you 1 hour of talk time.
5. Headset can be used with receiver and Bluetooth®
pairedwhile charging.
Charging via Qi wireless charger
1. Fold headset with the wireless charging icon on
theearcupto the outside.
2. Place earcup with wireless charging icon on top
ofanyQiwireless charging base.*
3. Indicator light will be a breathing, white light
whencharging.
4. Indicator light will be solid white when fully charged.
–2hours of charging fully charges the battery.
* Qi wireless charging base is not included.
LOGI TUNE APP
1. Download Logi Tune Desktop from
www.logitech.com/tune
2. Download the Logi Tune mobile app from the Apple App Store®
orGooglePlay™ stores by searching for “Logi Tune“.
9English

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during
conversationsso you are aware of how loud you are talking.
In the Logi Tune App, select the sidetone feature, andadjust
the dial accordingly.
- A higher number means you hear more external sound.
- A lower number means you hear less external sound.
AUTO SLEEP TIMER
By default, your headset will automatically power o
whennot in use for one hour. Adjust the sleep timer in
theLogi Tune App.
RESET YOUR HEADSET
To reset your headset back to its original state,
powerheadset on, press and hold the ANC button and
volume ’–’ button for 5 seconds. The headset is successfully
reset when it powers o and indicator light turns o.
UPDATE YOUR HEADSET
It is recommended to update both your headset
andreceiver. To do so, download the Logi Tune Desktop
fromwww.logitech.com/tune
HEADSET:
Height x Width x Depth:
174.7 x 176.7 x 70.7 mm
WEIGHT:
0.1808Kg
EARPADS:
Height x Width x Depth:
70.7 x 70.7 x 16.4 mm
RECEIVER:
Height x Width x Depth:
21.5 x 13.6 x 6.0 mm
ADAPTER:
Height x Width x Depth:
25.2 x 16.5 x 9.5 mm
DIMENSIONS
10 English