Lorex SHS-2S7LD Series User manual

The SHS System comes with the following components:
• 1x 7” LCD Monitor
• 2x Weather resistant Color Day/Night*IR Cameras with Stand
• 2x 60’ Extension Cables
• 1x AV Cable
•2 x Phone Jack RCA Cables
• 1x Monitor Stand
• 1x Wall Mounting Bracket
• 1x Power Adapter
Getting Started
AV Cable
Phone Jack RCA Cables Wall Mount Bracket
60’ Extension Cables
Monitor Stand
Power Adapter
7” LCD Monitor with 2 Cameras
Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cables.
A. Connect Cameras
Connect the DIN female end of the supplied 60’
extension cables to the cameras.
1
NOTE: Confirm that the arrows on the DIN Camera Cable and the
DIN Extension cable are aligned when connecting the cable. If the
pins in the DIN Cable are bent, the Camera will NOT function.
* IR illumination range up to 13ft. (4M) under ideal conditions. Objects at
or beyond this range may be partially or completely obscured depending on
the camera application. Picture changes from Color to B&W under low light
conditions.
** Not for use in direct exposure to water, rain or snow
SHS-2S7LD SERIES
QUICK SET-UP GUIDE
STEP - 1
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time Tools Skills - Easy
Under 30 Minutes* Hand Tools Plug & Play connectors, On
screen set up
* Installation time may vary based on
application and camera cabling
7” LCD VIDEO SURVEILLANCE SYSTEM
WITH 2 DAY/NIGHT*INDOOR/OUTDOOR** CAMERAS
B. Connectivity Diagram
Check your package to confirm that you have received the
complete system, including all components shown above.
2Connect the other end of the extension cables to
the short phone jack RCA Cables.
Connect the short phone jack
RCA Cable to the bottom of the
monitor.
3
Monitor Bottom
QSG_EN_R1
Connect one end of the power adaptor to the
power outlet and the other end to the monitor
4
2 x Cameras
2 x 60’ Extension Cables
7” LCD Monitor
Phone Jack RCA CablesPower Adapter
1
2
3
4

Counter/Table Vertical “Picture” Frame Tilted
MOUNTING OPTIONS
Wall Mount
(bracket included)
Stand Mount - For Flexible
Viewing Angles
Turn ON the monitor by pressing the Power ON/Off button located on the side of the monitor.
Channel Display LED Indicator:
• Select the channel you wish to watch by pressing the channel selection button on the monitor. A permanent
green light will appear in the relevant channel (1 or 2).
• Press the channel selection again to switch to the second channel.
• Press one more time for an auto switching mode. Green light will flash.
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time Tools Skills - Easy
Under 30 Minutes* Hand Tools Plug & Play connectors, On
screen set up
* Installation time may vary based on
application and camera cabling
7” LCD VIDEO SURVEILLANCE SYSTEM
WITH 2 DAY/NIGHT*INDOOR/OUTDOOR** CAMERAS
7” LCD MONITOR (PORTS)
Connect the phone jack end of the Audio/Video Cable to the A/V Output at the
bottom of the monitor. Connect the other end (Video - Yellow, Audio - White)
to your TV/VCR or Monitor (not included).
SHS-2S7LD SERIES
QUICK SET-UP GUIDE
STEP - 2
It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website
www.lorexcctv.com/support
www.lorexcctv.com
QSG_EN_R1
OPTIONAL STEP
1. Channel display LED indicator
2. Volume / brightness button control (+)
3. Volume / brightness control (-)
4. Function key (OSD for brightness, contrast control)
5. Mirror-view function
6. Power ON/OFF
7. CH Select / Auto switch
2
3
4
5
6
7
DISPLAY
1
TV / VCR / MONITOR
A/V Cable
Power Camera 1Camera 2 A/V Output