7ENGLISH
Vibration
-
mined according to EN62841-3-10:
Model M2402
h) : 4.5 m/s2
2
Model M2403
h) : 3.5 m/s2
2
NOTE:
NOTE:
WARNING:
The vibration emission during actual
-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
EC Declaration of Conformity
For European countries only
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
with this power tool.
Save all warnings and instruc-
tions for future reference.
(cordless) power tool.
1. Position yourself and bystanders away from
the plane of the rotating wheel.
-
ments and accidental contact with wheel.
2.
your power tool.
3. The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.
4. Wheels must be used only for recommended
applications. For example: do not grind with
shatter.
5.
of correct diameter for your selected wheel.
6. The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.
8. Do not use damaged wheels. Before each use,
inspect the wheels for chips and cracks. If the
power tool or wheel is dropped, inspect for
damage or install an undamaged wheel. After
inspecting and installing the wheel, position
yourself and bystanders away from the plane
of the rotating wheel and run the power tool
at maximum no load speed for one minute.
this test time.
9. Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As appro-
priate, wear dust mask, hearing protectors,
gloves and shop apron capable of stopping
small abrasive or workpiece fragments. The
-
ing loss.
10. Keep bystanders a safe distance away from
work area. Anyone entering the work area
must wear personal protective equipment.
11. Position the cord clear of the spinning acces-
sory.
the spinning wheel.
12. Regularly clean the power tool’s air vents. The
13.
materials. Do not operate the power tool while
placed on a combustible surface such as
wood.
