Manfrotto MVG220 User manual

MVG220
INSTRUCTIONS

2
Catalogue
1. Product Overview......................................................... 2
2. Start to use................................................................... 5
2.1 Charging .....................................................................................5
2.2 Position Lock..............................................................................6
2.3 Camera Installation.....................................................................7
2.4 Gimbal Balancing .......................................................................8
2.5 Power ON/OFF.........................................................................10
3. Function operation ..................................................... 10
3.1 Mode/Function Introduction.....................................................10
3.2 Button Operation......................................................................12
3.3 USB Port ..................................................................................15
3.4 Touch Screen............................................................................16
3.5 Modes Setting ..........................................................................18
3.6 Motion-timelapse Mode ...........................................................20
3.7 Initialization...............................................................................23
3.8 Manual Lock.............................................................................24
4. Manfrotto Gimbal App................................................ 24
4.1 Download Manfrotto Gimbal App.............................................24
4.2 App Connecting .......................................................................25
4.3 Firmware Upgrade....................................................................26
5. Accessories ................................................................ 27
5.1 Tripod .......................................................................................27
5.2 Versatile Arm ............................................................................27
Disclaimer....................................................................... 28

12
Introduction
MVG220 is a professional 3-axis stabilized handheld Gimbal for DSLR and
mirrorless camera. It is compatible with popular DSLR and mirrorless cameras
on the market. Its detachable versatile arm handle, makes it available to be
supporting by single hand and low angle shooting, and is allowed to mounted on
tripod and other adaptor.
MVG220 is designed with function button and LCD touch screen, which can
switch the Gimbal working mode, control the rotation and the parameters
setting by one hand. The camera shutter cable is equipped for controlling the
photography, video recording and focus following directly at handle.
Download Manfrotto Gimbal App.

2
1. Product Overview
GB
Camera Connection
All Lock Mode
Touch Screen Quick Release Plate
Arca Quick
Release Plate
Fixed Plate
1/4 inch Thread Hole
Tilt Axis
Tilt Axis
Position Lock
Safety Lock for Arca
Quick Release Plate
Joystick
Mode Button
Single tap: Switch between
pan mode & lock mode
Double tap: Follow mode
Triple tap: All Follow mode
Shutter Button
Press Halfway: Focus
Single tap:
Photo shooting/video recording
Long press for 5 seconds:
Auto-burst shot
(Press again to quit)
Vertical Arm Lock Screw
Power Button
①Long press: Power on/off
②Control the touch screen:
Single tap: Lock/unlock screen/
return to homepage
③Double tap: Standby mode
Single tap at standby mode:
To wake up the gimbal
Function Button
Single tap: Switch between
Video/Photo mode
1/4 inch Thread Hole
3/8 inch Thread Hole
Pan Axis
Quick Release Plate Safety Lock
Lens Holder
Pan Axis Position Lock
Trigger Button
Press & hold: Follow mode
Double tap: Reset
Triple tap: Selfie mode
(Pan axis turn 180° to shoot)
Cross Arm
Handle (Built in Battery)
Multifunction Knob
Vertical Arm
Roll Axis
Roll Axis Position Lock
Cross Arm Lock
Screw
Thumb Screw
Sliding Arm
Sliding Arm
Lock Screw
* Please download the detailed manual for the specific compatible camera and lens.
This product does not include the camera.
Max. Tilting Range 230° Theoretical Battery Life 14h (well-balanced)
Max. Rolling Range 360° Weight About 1100g
Max. Panning Range 360° Payload Capability 2200g (well-balanced)
Tilt Follow Speed 2°/s ~ 75°/s Compatible Cameras* Canon, SONY, Panasonic and others.
Pan Follow Speed 3°/s ~ 150°/s
Specifications
Overview
Bluetooth
Multifunction Knob Control
Battery Level
Pan Mode
Follow Mode
All Follow Mode
GB
Professional 3-axis gimbal designed for DSLR and mirrorless cameras, designed with
function buttons and LCD touch screen.
4

32
GB
Camera Connection
All Lock Mode
Touch Screen Quick Release Plate
Arca Quick
Release Plate
Fixed Plate
1/4 inch Thread Hole
Tilt Axis
Tilt Axis
Position Lock
Safety Lock for Arca
Quick Release Plate
Joystick
Mode Button
Single tap: Switch between
pan mode & lock mode
Double tap: Follow mode
Triple tap: All Follow mode
Shutter Button
Press Halfway: Focus
Single tap:
Photo shooting/video recording
Long press for 5 seconds:
Auto-burst shot
(Press again to quit)
Vertical Arm Lock Screw
Power Button
①Long press: Power on/off
②Control the touch screen:
Single tap: Lock/unlock screen/
return to homepage
③Double tap: Standby mode
Single tap at standby mode:
To wake up the gimbal
Function Button
Single tap: Switch between
Video/Photo mode
1/4 inch Thread Hole
3/8 inch Thread Hole
Pan Axis
Quick Release Plate Safety Lock
Lens Holder
Pan Axis Position Lock
Trigger Button
Press & hold: Follow mode
Double tap: Reset
Triple tap: Selfie mode
(Pan axis turn 180° to shoot)
Cross Arm
Handle (Built in Battery)
Multifunction Knob
Vertical Arm
Roll Axis
Roll Axis Position Lock
Cross Arm Lock
Screw
Thumb Screw
Sliding Arm
Sliding Arm
Lock Screw
* Please download the detailed manual for the specific compatible camera and lens.
This product does not include the camera.
Max. Tilting Range 230° Theoretical Battery Life 14h (well-balanced)
Max. Rolling Range 360° Weight About 1100g
Max. Panning Range 360° Payload Capability 2200g (well-balanced)
Tilt Follow Speed 2°/s ~ 75°/s Compatible Cameras* Canon, SONY, Panasonic and others.
Pan Follow Speed 3°/s ~ 150°/s
Specifications
Overview
Bluetooth
Multifunction Knob Control
Battery Level
Pan Mode
Follow Mode
All Follow Mode
GB
Professional 3-axis gimbal designed for DSLR and mirrorless cameras, designed with
function buttons and LCD touch screen.
4
This product does not include the camera.

4
Standard kit accessories
USB 2.0 to Micro
x1
USB 2.0 to Mini
x1
USB 3.0 to Micro 3.0
x1
USB 2.0 to Type C
x1
Type C to Multi
x1
DC 2.5mm (Panasonic
Shutter Cable) x1
Anti-slip Metal Tripod
x1
Versatile Arm
x1

54
2. Start to use
⚠
Please read the detailed manual before you begin.
1) Please mount the camera and balance it before Power ON.
2) When the battery is low, please charge the Gimbal.
3) When not in use for a long time, power off the Gimbal.
4) For quick start, utilising MVG220 basic features follow the steps below.
TIPS
2.1 Charging
⚠
Please fully charge the battery before power on the Gimbal for the first time.
Open the USB rubber cover. Connect the USB 2.0 to Type-C cable to charge.
Quick charge is available.
USB 2.0 to Type-C

6
Balanced lock statusStored lock status
2.2 Position Lock
Each rotating axis has a position lock for convenient balancing and storage. Be
sure to unlock the position locks before using the Gimbal.
Download Manfrotto Gimbal app.

76
5
5
5
5
⚠
Make sure the battery and memory
card are installed before camera
installation.
Step 2: Mount camera on ARCA
quick release plate ④.
Step 1: Mount quick release plate
①on fixed plate ②, lock it. Loosen
the ARCA quick release plate
safety lock ③, take out ARCA quick
release plate ④.
Step 3: Insert ARCA quick release
plate directly into quick release plate
①, tighten the safety lock ③for
ARCA quick release plate.
Step 4: Install lens holder ⑤to
support lens, and tighten the thumb
screw.
2.3 Camera Installation

8
2.4.1 Balance Tilt Axis
2.4 Gimbal Balancing
(1) a. Unlock the tilt axis position lock ①, turn the camera lens upwards, and
check the gravity center of camera.
b. Loosen the sliding arm lock screw ②, slide the sliding arm ③to balance the
camera.
c. Tighten the sliding arm lock screw ②, when the camera lens keeps upwards
that means balanced.
1) Before balancing the Gimbal, please lock the Gimbal at the balanced lock
status.
2) Lens cover should be removed from the camera and the memory card
needs to be inserted to the camera to complete all the connections to ensure
that the camera is ready for shooting.
3) When balancing the Gimbal, make sure the camera and Gimbal are all
powered off.
4) If it is needed to add accessories after the balance is completed, Gimbal
needs to be re-balanced again.
TIPS