Medline ELEMENTS MDS89664ELMB Installation guide

MEDLINE ELEMENTSTM
BEDSIDE COMMODE
INODORO PORTÁTIL
PLEASE READ
CAREFULLY
BEFORE USING
YOUR MEDLINE
COMMODE.
To ensure the safe
installation, adjustment,
and operation of Medline
Elements Commode,
these instructions MUST
be followed.
LEA CON
ATENCIÓN
ANTES DE USAR
SU INODORO
PORTÁTIL
MEDLINE.
Para una instalación,
ajuste y funcionamiento
seguros del banco para
baño, se DEBEN seguir
estas instrucciones.
MDS89664ELMB
User Instructions and Warranty
Instrucciones para el usuario y garantía
Inhibits the Growth of Stains and Odors from Bacteria, Mold & Mildew
Inhibe El Crecimiento De Manchas y Olores De Bacterias, Moho y Hongos
Keeps the Bedside Commode Cleaner for Longer
Mantiene El Inodoro Portátil Más Limpio Por Más Tiempo

2 MEDLINE | GPI074-IM19 (Rev. 05-20-2015)
General Warnings
DO NOT install this product without first reading and understanding
this instruction manual. If you are unable to understand these warn-
ings, cautions, and instructions, contact a healthcare professional or
dealer before attempting to install this equipment.
Instructions MUST be followed. FAILURE TO FOLLOW INSTRUCTIONS
MAY RESULT IN SERIOUS INJURY TO THE USER OR DAMAGE TO THE
PRODUCT.
Warnings:
√Toilet seat must be in down position before use. Failure to do so may result in
breakage of unit and possible injury to user.
√Inspect all parts for shipping damage. In case of shipping damage, do not use.
√Make certain that the snap buttons fully protrude through the same respective
adjustment hole of each leg extension. This ensures that the leg extensions
are securely locked in position and an even height adjustment is achieved.
√Ensure all screws, nuts and/or bolts are tight at all times.
√Check the rubber tips on the leg extensions for rips, wear or if they are
missing. Replace them immediately if any of these conditions exist.
√All four leg extensions with rubber tips must touch the floor at all times.
√Users with limited physical capabilities should be supervised or assisted
when using a commode.
DO NOT exceed the maximum Weight Capacity or serious
injury could result: Maximum weight capacity: 400lbs
During use, evenly distribute weight between the arm supports.
Cleaning
1. The bedside commode features built-in Microban®antimicrobial protection to help
prevent the growth of stain and odor causing bacteria, mold and mildew to keep it
cleaner for longer. *
2. The bedside commode can be easily cleaned with regular household cleaning prod
ucts. Use a non-abra sive cleaner with warm water. DO NOT use abrasive powders or
scouring pads.

1-800-MEDLINE (633-5463) |medline.com 3
Maintenance
»Periodically inspect the bedside commode for damage or loose components.
»Ensure all push buttons are protruded from the extension legs.
»Check the rubber feet on the leg extensions for rips or wear. If any of these
conditions exist, or if they are missing, replace them immediately.
Assembly Instructions
Ensure that you have all the necessary components before assembling your Medline
Elements™ Bedside Commode.
NOTE: Upon receipt of the package, check ALL parts for shipping
damage. If shipping damage is noted, DO NOT USE. Call
Medline to report the issue immediately at 1-800-MEDLINE
A
L
G
L
B
C
E
D
F
H
G
H
A
B
i
C
D
E
F
1 Commode compartment (bucket,
splash guard, and lid are all inside)
2 Leg Mainframes
8 hand screws with washer
4 leg extensions
2 armrest handles (one with toilet
paper holder)
2 backrest extension bars
2 Small Hand screws
1 Backrest
Bucket
i
J
A
L
L
J
K
L
Bucket Lid
Splash guard (not pictured)
4 Bronze braces (connected to commode compartment (A))

4 MEDLINE | GPI074-IM19 (Rev. 05-20-2015)
PART ONE: Attaching Legs to main commode compartment
Below parts will be needed to assemble the legs to the main commode compartment
and seat.
Step 1: Line up the leg mainframes (B) with the main commode compartment (A).
Start by flipping the commode compartment (A) upside down. Match up the holes
on the leg mainframes (B) with the holes on the bronze brace (L) on the outside of
the commode compartment (A). The bronze braces (L) will be on the inside of the leg
mainframes (B). Ensure the tubular slot protruding from the back of the leg mainframe is
placed toward the back end of the commode.
Step 2: Use hand screws (C) to connect the leg mainframes (B) to the commode
compartment (A).
Insert hand screws (B) where holes align on the leg main frame (B) and bronze brace (L).
Hand tighten. 4 hand screws (C) will be needed to fasten each leg main frame (B).
See below for additional pictures on how to apply hand screws.
Picture 1: Insert screw through the leg main frame first and then through the bronze brace
Picture 2: Apply washer over screw and up against the bronze braze.
Picture 3: Take plastic screw piece and hand tighten over screw pressing washer up
against bronze brace.
Picture 4: Hand Tighten till hand screw is secure.
PIC 1 PIC 2 PIC 3 PIC 4
Step 1 Step 2
A
B
C
D
L
L

1-800-MEDLINE (633-5463) |medline.com 5
NOTE: It is recommended that all four hand screws (C) for a sin-
gle leg mainframe (B) be loosely crewed into place. Once all the
screws are in place then fully tighten through the aligned holes.
Step 3: Attach leg extensions (D) to leg mainframes (B).
Depress the push-buttons on the mainframe and place feet leg extensions (D) over leg
mainframe (B) until secured at desired height position. Repeat with three remaining legs.
Make sure all four extension legs are installed at the same height.
Make certain that the snap buttons fully protrude
through the same respective adjustment hole
of each leg extension. This ensures that the leg
extensions are securely locked in position and an
even height adjustment is achieved.
PART TWO: Assemble the Armrests
Step 1: Attach armrest (E) to the topside of the leg mainframes (B).
Flip commode over so it is resting with all four feet securely on the floor. Ensure that
the legs are all set to the same height level. Insert one of the armrests (E) down into
the upward facing tubes of the leg mainframes (B). Once inserted, press down the push
buttons on both sides of the armrest (E) and continue to slide into the leg mainframe
tube (G) until the push-buttons lock into place.
Make sure push-buttons are fully protruded before using. Repeat this step with the
other armrest.
NOTE: Apply the armrests (E) so the handles (top portion) are
angled outward creating more clearance between the two
armrests (E).
Step 3
EStep 1 Step 2

6 MEDLINE | GPI074-IM19 (Rev. 05-20-2015)
PART THREE: Assemble the Backrest
Step 1: Attach the Backrest (H).
Slide the backrest (H) down over the backrest extension bars (F). Press down the push
buttons on the backrest extension bars (F) and slide the backrest (G) down over the push
buttons until the backrest locks into place. Make sure push-buttons are fully protruded
before using.
Step 2: Attach the backrest extension bars (F) to the back of the leg mainframes
(B).
Insert one of the backrest extension bars (F) into the tubular slot protruding from the
back of the leg mainframes (B). Once inserted align the holes and tighten the small
hand screw (G). HAND TIGHTEN ONLY.
Repeat this step with the second backrest extension bar (F) on the other side.
G
PARTS NEEDED
H
F
STEP 1 STEP 2

1-800-MEDLINE (633-5463) |medline.com 7
Medline Elements™ Bedside Commode has multiple adjustment points to create
a custom fit that keeps you comfortable while bathing. Use the push-buttons
on the various adjustable features to find the setting that you like best. Once you
have made an adjustment please make sure push-buttons on both sides are fully
protruded and secure before using.
Adjustment points:
.5” increment adjustable seat height
Armrests can be removed if preferred.
Height adjustable seat
Height adjustable backrest
Height adjustable armrests
The Medline ELEMENTSTM Bedside Commode has a large, flat seat cover that conceals
the toilet seat and commode bucket when not in use. Concealing the commode function
when not in use promotes dignity for the user and a less institutional look.
Raise lid when commode is to be used Close lid when not in use to keep toileting features hidden

8 MEDLINE | GPI074-IM19 (Rev. 05-20-2015)
Cleaning a commode after it is used is an unpleasant job for caretakers. In addition,
being cleaned up after can be a source of embarrassement for those using the
commode. Medline Commode Liner with Absorbent Pad answers those concerns.
- Safe collection
- Solidifies liquids
- Eliminates Odor
- Easy disposal of body fluids
The Medline Commode liner will allow you to avoid unpleasant
hand cleaning of the commode pail after use.
REF# MDS89664LINER
12 liners per Box, 6 boxes per case
Medline Commode Liners sold separately. Purchase Medline Commode Liners where
ever the Medline Elements™ Bedside Commode is sold.

1-800-MEDLINE (633-5463) |medline.com 9
Advertencias Generales
NO instale este producto sin antes leer y entender este manual de
instrucciones. Si no comprende estas advertencias, precauciones e
instrucciones, antes de intentar instalar este equipo comuníquese con
un profesional de atención médica o con el distribuidor.
Las instrucciones se DEBEN seguir. SISI NO SE SIGUEN ESTAS
INSTRUCCIONES, EL USUARIO PUEDE SUFRIR LESIONES
GRAVES O EL PRODUCTO PUEDE DAÑARSE.
Advertencias:
√El asiento del inodoro debe estar hacia abajo antes de usar. Si no está hacia
abajo, se puede romper la unidad y el usuario puede resultar lesionado.
√Verifique que TODAS las piezas se encuentren en buenas condiciones y no se
hayan dañado durante el transporte. En caso de encontrar algún tipo de daño,
no use el producto.
√Asegúrese de que los botones a presión sobresalgan por completo de su
orificio de ajuste en cada pata extensible. De esta manera se asegura de que
las patas extensibles están trabadas de forma segura en su respectiva posición
y de que se ha logrado un ajuste parejo de la altura.
√Asegúrese de que todos los tornillos, tuercas y/o pernos estén ajustados en
todo momento.
√Verifique que las puntas de caucho en las patas extensibles no presenten
rasgaduras ni desgaste, y que no falte ninguna. Reemplácelas inmediatamente
si existiera alguna de estas condiciones.
√Las cuatro pata extensibles con puntas de caucho deben tocar el piso en todo
momento.
√Los usuarios con limitaciones físicas deben recibir supervisión o ayuda al uti-
lizar el inodoro.
NO pas exceda la capacidad máxima de peso del usuario porque podría
sufrir lesiones graves: Capacidad máxima de peso: 181 kg
Durante su uso, distribuya el peso en forma pareja entre los apoyabrazos.
Limpieza
1. El banco para baño presenta una protección antimicrobiana Microban® incorporada
para ayudar a prevenir el crecimiento de bacterias, moho y hongos que causan man-
chas y olores, y así mantener el producto más limpio durante más tiempo. *
2. El inodoro portátil puede limpiarse fácilmente con productos de limpieza normales.
Utilice un limpiador no abrasivo con agua tibia. NO utilice polvos ni almohadillas
abrasivas.

10 MEDLINE | GPI074-IM19 (Rev. 05-20-2015)
Mantenimiento
»Inspeccione periódicamente el inodoro portátil con el fin de verificar
que no esté dañado ni que algún com ponente esté suelto.
»Asegúrese de que todos los botones pulsadores sobresalgan de las patas extensibles.
» Verifique que las puntas de caucho en las patas extensibles no presenten rasgaduras
ni desgaste. Si las puntas se encuentran en estas condiciones, o si faltan, reemplácelas
de inmediato.
Instrucciones De Montaje
Asegúrese de que cuenta con todos los componentes necesarios antes de ensamblar su
inodoro portátil Medline Elements™.
NOTA: Al recibir el paquete, verifique que TODAS las piezas se
encuentren en buenas condiciones y no se hayan dañado
durante el transporte. En caso de encontrar algún tipo de daño,
NO USE EL PRODUCTO. Comuníquese con Medline al
1-800-MEDLINE para informar de inmediato el problema.
A
L
G
L
B
C
E
D
F
H
G
H
A
B
i
C
D
E
F
1 compartimento del inodoro (el cubo, la protección
contra salpicaduras y la tapa se encuentran adentro)
2 armazones principales de las patas
8 tornillos a rosca con arandelas
4 patas extensibles
2 mangos de apoyabrazos
(uno con un portarrollos de papel higiénico)
2 barras extensibles del respaldo
2 tornillos a rosca pequeños
1 respaldo
1 cubo
i
J
A
L
L
J
K
L
1 tapa del cubo
1 protección contra salpicaduras (no se muestra)
4 abrazaderas de bronce (conectadas al compartimento
del inodoro (A))