MegaLite Evricolor User manual

USER MANUAL
Table of Contents
Safety Information……………………………………………………………………………………………. 3
Specifications……………………………………………………………………………………………………..4
Main Power Connection…………………………………………………………………………………..6
DMX-512 Connection…………………………………………………………………...……………...... 6
Main Control Menu Tri-Chip…………………………………………………………………………… 7
DMX Profile Tri-Chip.........................................................................................................9
Main Control Menu Quad-Chip…………………………………………………………………….10
DMX Profile Quad-Chip………………………………………………………………………………….12
Rigging the Fixture………………………………………………………………………………………….13
Cleaning & Maintenance.............................................................................................13
Parts List............................................................................................................................13

Check that the unit has not been damaged during transport
Protection Against Fire
1. Maintain a minimum of 1 foot distance from any type of flame.
3. Replace fuse only with the specified type and rating.
4. Do Not install the unit to close to a heat source.
5. Make sure cable are properly secured away from unit movement.
6. Maximum surface operating temperature 80º.
Protection Against Fire
1. Disconnect power before servicing.
2. For connection to main power supply proceed to page 5.
3. This unit must be earthed. (electronically grounded)
4. Do not submerge unit in water.
Protection Against Mechanical Hazards
1. Use safety chain when hanging unit.
2. Use quality clamps or bolts when positioning unit
3. Do not open unit while it is on, risk of electrical shock.
3

4
Specifications
Part
Fixture
7110-EvriColor CM5 TRGB (Red, Green, Blue)
7111-EvriColor CM5 TACW (Amber, Cool White, Warm White)
7112-EvriColor CM5 QRGBW (Red, Green, Blue, White)
7113-EvriColor CM5 PRGBWA (Red, Green, Blue, White, Amber)
Mechanical Specifications
DMX Connections: XLR 3 pin Or XLR 5 Pin
Power Connection: Nema 5-15
Thermal: Maximum ambient temperature 104°
Maximum surface temperature 140°
Fastening System: Dual mounting yoke
Size: 13.25” x 9.86” x 6.75”
Weight: 11lb (heaviest option)
Size: 16” x 9.5” x 9.5
Weight: 12.5lb
Fixture Packaging
6.75”
9”
13.25”
9.86”
Electrical Specifications
LED Quantity: 18 Tri Color 3 Watt or 7 Quad Color 10 Watt or 7 Pent Color 12 Watt
LED Refresh rate : 400Hz (flicker free)
LED–Lifetime: Average 60,000 to 100,000
Power Supply: Electronic Universal 100-240V 50/60 Hz
Power Consumption 3 Watt 10 Watt 12 Watt
Watts: 62 110 180
Amps: .87 1.25 1.70
Protocol: DMX 512
DMX Modes: Tri LED operation Mode 1-3 Ch Red, Green, Blue
Mode 2-4 Ch Dimmer/Strobe, R, G, B
Mode 3-6 Ch R,G, B, Strobe, Macro, Dimmer
Quad LED operation Mode 1-4 Ch Red, Green. Blue ,White
Mode 2-7 Ch R,G,B, W, Strobe, Macro, Dimmer
Penta LED operation Mode 1-4 Ch Red, Green. Blue ,White, Amber
Mode 2-7 Ch R,G,B, W, A, Strobe, Macro, Dimmer
Display Setting: Master Slave
Standalone

Ordering Information
Ordering Example
Item# 7111-TACW-25-WHIT-5
= 18Tri x 3W—Amber,Cool White, Warm White-25 degree-White Fixture Housing-5 pin Connectors in and out
5
LED Color
Item Number
7110 18Tri x 3W
7111 18Tri x 3W
TRGB Tri Red ,Green
Blue
TACW Tri Amber,
Warm White, Cool
White
15 15°
25 25°
45 45°
60 60°
Tri Beam Angle
BLAK Black
WHIT White
XXXX Custom
Fixture Color
3 3 pin in and out
5 5 pin in and out
DMX Input
7112 12 x 10W QRGBW Quad Red,
Green, Blue,
White Q25 25°
Q45 45°
Quad & Five Beam
3W 3 pin in and out
& Wireless DMX
5W 5 pin in and out
& Wireless DMX
7113 12 x 12W FRGBWA Penta Red,
Green, Blue,
White, Amber

This fixture is equipped with a auto switchable power supply that will let the unit operate from 110V or 220V from 50Hz to 60Hz.
6
Main Power Connection
Caution!
1. Do not connect fixture to a dimmer system.
2. This unit has Auto switching power supply. It will respond to 110V or 220V automatically
3. This unit must be earthed. (electronically grounded)
4. Replace fuse only with the specified type and rating.
The occupation of the connection-cable is as follows:
DMX-512 Connection
110V Connection
The fixture is equipped with 3 pin XLR Sockets for DMX input and output. The sockets are wired in parallel. Only use a shielded
twisted pair cable designed for RS-485 and 3 pin XLR plugs and connectors in order to connect the controller with the fixture or
the fixture with another.
DMX—input DMX—output
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a 120
Ohm resistor between the (-) and the (+) signal into a 3 pin XLR plug and plug it in to the
last fixture on the signal run. Pre-manufactured terminator plugs are available for
purchase from your Mega-Lite dealer (HOS-DMXT).
Cable (USA) Cable (EU) Pin Connection
Black Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
Cable (USA) Cable (EU) Pin Connection
Black Brown
White
Green
Light Blue
Yellow/Green
Live
Live
L
N
220V Connection
LN
1
2
3
2
3
1
1. Shield
2. Signal (-)
3. Signal (+)
5
3
4
2
1 1
2
3
4
5
or
or

7
Main Control Menu for 7110 or 7111 Tri Chip LED model
The control board on the fixture base is your interface to access and control
all the functions on the unit. Its digital display gives you a code view of the
options and functions. The following will explain each function and its options.
Menu
DMX Address
Press Enter to select the DMX start channel use the up/down keys, display will be flashing once you have selected the de-
sired start channel Press Enter to confirm display will stop flashing.
Up Down Enter
CONTROL BOARD
DMX Address Red Dimmer Green Dimmer Blue Dimmer Fade ScrollDMX Mode
1-512 0-255 0-255 0-255 00-15 3-Ch
4-Ch
6-Ch
Fade Scroll
00-15
DMX Mode
This function allows you to select the mode in witch you want to control the Arc 90. Press Enter use the up/down keys to select
desired DMX mode settings. Press Enter to confirm the settings.
3 CH
4 CH
6 CH
Red, Green, Blue or Amber, Warm White, Cool White
Dimmer/Strobe, Red, Green, Blue or Dimmer/Strobe, Amber, Warm White, Cool White
Red, Green, Blue, Strobe, Macro, Dimmer or Amber, Warm White, Cool White, Strobe, Macro, Dimmer
Red Dimmer
This function allows you to dim up or down the red or amber LED’s . Press Enter use the up/down keys to select desired dimmer
settings. Press Enter to confirm the settings.
Green Dimmer
This function allows you to dim up or down the green or warm white LED’s . Press Enter use the up/down keys to select desired
dimmer settings. Press Enter to confirm the settings.
Blue Dimmer
This function allows you to dim up or down the blue or cool white LED’s . Press Enter use the up/down keys to select desired
dimmer settings. Press Enter to confirm the settings.

Fade Scroll
This function allows you to fade the LED’s on the whole strip from one color to another. Press Enter use the up/down keys to
select desired fade speed settings from 0 to 20. Press Enter to confirm the settings.
Flash
This function allows you to strobe the LED’s on the whole . Press Enter use the up/down keys to select desired flash settings.
Press Enter to confirm the settings.
8

EvriColor 3 Channel Mode
DMX Chanel Function Description Value
1 LED Color Red LED intensity 0-255
2 LED Color Green LED Intensity 0-255
3 LED Color Blue LED Intensity 0-255
EvriColor 4 Channel Mode
DMX Chanel Function Description Value
Dimmer 0-152
1 Dimmer Strobe (slow to fast) 153-242
Dimmer Full On 243-255
2 LED Color Red LED intensity 0-255
3 LED Color Green LED Intensity 0-255
4 LED Color Blue LED Intensity 0-255
EvriColor 6 Channel Mode
DMX Chanel Function Description Value
1 LED Color Red LED intensity 0-255
2 LED Color Green LED Intensity 0-255
3 LED Color Blue LED Intensity 0-255
4 Strobe Strobe (slow to fast) 0-255
No Function 0-1
Color fade (slow to fast) 2-19
Color Snap (slow to fast) 20-39
Random (slow to fast) 40-59
Yellow 60-79
Purple 80-99
5 Macro Aqua 100-119
Orange 120-139
Red Pulse 140-159
green Pulse 160-179
Blue Pulse 180-199
Yellow Pulse 200-219
Aqua Pulse 220-229
White Pulse 230-249
White LED Full 250-255
6 Dimmer Dimmer Off to Full 0-255
DMX Profile for 7110 Tri R,G,B Chip LED model
9

EvriColor 3 Channel Mode
DMX Chanel Function Description Value
1 LED Color Amber LED intensity 0-255
2 LED Color Warm White LED Intensity 0-255
3 LED Color Cool White LED Intensity 0-255
EvriColor 4 Channel Mode
DMX Chanel Function Description Value
Dimmer 0-152
1 Dimmer Strobe (slow to fast) 153-242
Dimmer Full On 243-255
2 LED Color Amber LED intensity 0-255
3 LED Color Warm White LED Intensity 0-255
4 LED Color Cool White LED Intensity 0-255
EvriColor 6 Channel Mode
DMX Chanel Function Description Value
1 LED Color Amber LED intensity 0-255
2 LED Color Warm White LED Intensity 0-255
3 LED Color Cool White LED Intensity 0-255
4 Strobe Strobe (slow to fast) 0-255
No Function 0-1
Color fade (slow to fast) 2-19
Color Snap (slow to fast) 20-39
Random (slow to fast) 40-59
Color Temp 60-79
Color Temp 80-99
5 Macro Color Temp 100-119
Color Temp 120-139
Color Pulse 140-159
Color Pulse 160-179
Color Pulse 180-199
Color Pulse 200-219
Color Pulse 220-229
Color Pulse 230-249
White LED Full 250-255
6 Dimmer Dimmer Off to Full 0-255
DMX Profile for 7111 Tri A,W,C Chip LED model

10
Main Control Menu for 7112 Quad Chip LED model
The control board on the fixture base is your interface to access and control
all the functions on the unit. Its digital display gives you a code view of the
options and functions. The following will explain each function and its options.
Menu
DMX Address
Press Enter to select the DMX start channel use the up/down keys, display will be flashing once you have selected the de-
sired start channel Press Enter to confirm display will stop flashing.
Up Down Enter
CONTROL BOARD
DMX Address Red Dimmer Green Dimmer Blue Dimmer Fade Scroll
DMX Mode
1-512 0-255 0-255 0-255 00-15 4-Ch
7-Ch
Fade Scroll
00-15
White Dimmer
0-255
DMX Mode
This function allows you to select the mode in witch you want to control the Arc 90. Press Enter use the up/down keys to select
desired DMX mode settings. Press Enter to confirm the settings.
4 CH
7 CH
Red, Green, Blue, White
Red, Green, Blue, White, Strobe, Macro, Dimmer
Red Dimmer
This function allows you to dim up or down the red LED’s . Press Enter use the up/down keys to select desired dimmer settings.
Press Enter to confirm the settings.
Green Dimmer
This function allows you to dim up or down the green LED’s . Press Enter use the up/down keys to select desired dimmer set-
tings. Press Enter to confirm the settings.
Blue Dimmer
This function allows you to dim up or down the blue LED’s . Press Enter use the up/down keys to select desired dimmer settings.
Press Enter to confirm the settings.
White Dimmer
This function allows you to dim up or down the White LED’s . Press Enter use the up/down keys to select desired dimmer set-
tings. Press Enter to confirm the settings.

Fade Scroll
This function allows you to fade the LED’s from one color to another. Press Enter use the up/down keys to select desired fade
speed settings from 0 to 15. Press Enter to confirm the settings.
Flash
This function allows you to strobe all the LED on full . Press Enter use the up/down keys to select desired flash speed settings
from 0 to 15. Press Enter to confirm the settings.
11

DMX Profile for 7112 Quad Chip LED model
EvriColor 4 Channel Mode
DMX Chanel Function Description Value
1 LED Color Red LED intensity 0-255
2 LED Color Green LED Intensity 0-255
3 LED Color Blue LED Intensity 0-255
4 LED Color White LED Intensity 0-255
EvriColor 7 Channel Mode
DMX Chanel Function Description Value
1 LED Color Red LED intensity 0-255
2 LED Color Green LED Intensity 0-255
3 LED Color Blue LED Intensity 0-255
4 LED Color White LED Intensity 0-255
5 Strobe Strobe (slow to fast) 0-196
Random Strobe (slow to fast) 197-255
No Function 0-1
Color fade (slow to fast) 2-19
Color Snap (slow to fast) 20-39
Random (slow to fast) 40-59
Yellow 60-79
Purple 80-99
6 Macro Aqua 100-119
Orange 120-139
Red Pulse 140-159
green Pulse 160-179
Blue Pulse 180-199
Yellow Pulse 200-219
Aqua Pulse 220-229
White Pulse 230-249
White LED Full 250-255
7 Dimmer Dimmer Off to Full 0-255
12

DMX Address
Press Enter to select the DMX start channel use the up/down keys, display will be flashing once you have selected the de-
sired start channel Press Enter to confirm display will stop flashing.
DMX Address Red Dimmer Green Dimmer Blue Dimmer Fade Scroll
DMX Mode
1-512 0-15 0-15 0-15 00-15 5-Ch
8-Ch
Fade Scroll
00-15
DMX Mode
This function allows you to select the mode in witch you want to control the Arc 90. Press Enter use the up/down keys to select
desired DMX mode settings. Press Enter to confirm the settings.
5 CH
8 CH
Red, Green, Blue, White, Amber
Red, Green, Blue, White, Amber, Strobe, Macro, Dimmer
Red Dimmer
This function allows you to dim up or down the red LED’s . Press Enter use the up/down keys to select desired dimmer settings.
Press Enter to confirm the settings.
Green Dimmer
This function allows you to dim up or down the green LED’s . Press Enter use the up/down keys to select desired dimmer set-
tings. Press Enter to confirm the settings.
Blue Dimmer
This function allows you to dim up or down the blue LED’s . Press Enter use the up/down keys to select desired dimmer settings.
Press Enter to confirm the settings.
Menu Up Down Enter
CONTROL BOARD
White Dimmer
0-15
Amber Dimmer
0-15
Main Control Menu for 7113 Penta R,G,B,W,A Chip LED

Fade Scroll
This function allows you to fade the LED’s from one color to another. Press Enter use the up/down keys to select desired fade
speed settings from 0 to 15. Press Enter to confirm the settings.
Flash
This function allows you to strobe all the LED’s. Press Enter use the up/down keys to select desired strobe speed settings from
0 to 15. Press Enter to confirm the settings.
White Dimmer
This function allows you to dim up or down the white LED’s . Press Enter use the up/down keys to select desired dimmer set-
tings. Press Enter to confirm the settings.
Amber Dimmer
This function allows you to dim up or down the amber LED’s . Press Enter use the up/down keys to select desired dimmer set-
tings. Press Enter to confirm the settings.

EvriColor 5 Channel Mode
DMX Chanel Function Description Value
1 LED Color Red LED intensity 0-255
2 LED Color Green LED Intensity 0-255
3 LED Color Blue LED Intensity 0-255
4 LED Color White LED Intensity 0-255
5 LED Color Amber LED Intensity 0-255
EvriColor 8 Channel Mode
DMX Chanel Function Description Value
1 LED Color Red LED intensity 0-255
2 LED Color Green LED Intensity 0-255
3 LED Color Blue LED Intensity 0-255
4 LED Color White LED Intensity 0-255
5 LED Color Amber LED Intensity 0-255
6 Strobe Strobe (slow to fast) 0-196
Random Strobe (slow to fast) 197-255
No Function 0-1
Color fade (slow to fast) 2-19
Color Snap (slow to fast) 20-39
Random (slow to fast) 40-59
Yellow 60-79
Purple 80-99
7 Macro Aqua 100-119
Orange 120-139
Red Pulse 140-159
green Pulse 160-179
Blue Pulse 180-199
Yellow Pulse 200-219
Aqua Pulse 220-229
White Pulse 230-249
White LED Full 250-255
8 Dimmer Dimmer Off to Full 0-255

Cleaning and maintenance
Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installations and electron-
ics checked by an expert every 2 years.
The following points have to be considered during the inspection:
1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
3) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments. Further
instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems
have to be removed.
Note: There is no serviceable parts inside the device except for the LED’s. Maintenance and service operations are to be carried
out by authorized dealers.
Replacing the fuse: Only replace the fuse with the same type and rating. Fuse is located inside the power supply
Replacing the power cable: If the power cable of this device becomes damaged, it has to be replaced by authorized dealers or
trained professional only.
Should you have further questions , please contact your dealer.
13
Parts List
7100-my Mounting Yolke
7100-Knob Black Knob
7100-knobW White Knob
7100-ps Power supply
7100-bd Barn door attachment
7100-dmx5 DMX 5pin connector card
7100-dmx3 DMX 3pin connector card
Rigging the fixture
Caution!
1. The installations must be carried out by an authorized dealer or trained professional.
2. Unit may cause severe injures if you have doubts concerning the safety do not install.
3. Unit is to be 24inches away from flammable materials (decoration material)
4. Use high quality installation equipment to hang unit.
When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experience includ-
ing but not limited to calculating working loads, material being used and periodic safety inspections. If you lack these qualifica-
tions, do not attempt the installation yourself, instead use a professional structural rigger.
When rigging the unit always be secured with a secondary safety attachment. The installation location of the EvriColor CM5 has
got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming. Installation should be checked at
least one time a year by a skilled person.
7112-4C Display 4Ch Control
7112-mpcb4 Main PCB 4Ch
7113-mpcb5 Main PCB 5 Ch
7110-3C Display 3Ch Control
7112-5C Display 5Ch Control
7110-mpcb3 Main PCB 3Ch

Mega-Lite
5718 Kenwick St
San Antonio, TX 78238
Ph 210-684-2600 Fax [phone]
www.mega-lite.com / [email protected]m
Warranty Information
Limited Warranty
Unless otherwise stated, your product is covered by a one year parts and labor limited warranty. Dichroic filters and glass gobos are not guaranteed
against breakage or scratches to coating. It is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and dealer
or distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty period.
Returning an Item Under Warranty for Repair
It is necessary to obtain a Return Material Authorization (RMA) number from your dealer or point of purchase BEFORE any units are returned for
repair. The manufacturer will make the final determination as to whether or not the unit is covered by warranty. Lamps are covered by the lamp
manufacturer’s warranty.
Any Product unit or parts returned to MEGA Systems Inc. must be packaged in a suitable manner to ensure the protection of such Product unit or
parts, and such package shall be clearly and prominently marked to indicate that the package contains returned Product units or parts and with an
RMA number. Accompany all returned Product units or parts with a written explanation of the alleged problem or malfunction. Ship returned Prod-
uct units or parts to: 5711 Kenwick St. San Antonio TX 78254 USA.
Note: Freight Damage Claims are invalid for fixtures shipped in non-factory boxes and packing materials.
Freight
All shipping will be paid by the purchaser. Items under warranty shall have return shipping paid by the manufacturer only in the Continental United
States. Under no circumstances will freight collect shipments be accepted. Prepaid shipping does not include rush expediting such as air freight. Air
freight can be sent customer collect in the Continental United States.
REPAIR OR REPLACEMENT AS PROVIDED FOR UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
MEGA SYSTEMS INC. MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO ANY PRODUCT, AND MEGA SYS-
TEMS SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MEGA
SYSTEMS SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING LOST PROF-
ITS, SUSTAINED OR INCURRED IN CONNECTION WITH ANY PRODUCT OR CAUSED BY PRODUCT DEFECTS OR THE PARTIAL
OR TOTAL FAILURE OF ANY PRODUCT REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING
NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND WHETHER OR NOT SUCH DAMAGE WAS FORESEEN OR UNFORESEEN.
Warranty is void if the product is misused, damaged, modified in any way, or for unauthorized repairs or parts. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.