MELINERA HG01313-BS User manual

LED TREE
LED TREE
Operation and safety notes
IAN 322401_1901

GB / IE / NI Operation and safety notes Page 5

A1 A2 B
4
6
1
1
1
5
2
C E
7 3
4 6
8
5
D
8
8
1
2
4
3
5678
9
78
HG01313-BS/HG01313B-BS/HG01313C-BSHG04147-BS
10
10
F

5GB/IE/NI
List of pictograms used........................................................................................................Page 6
Introduction...................................................................................................................................Page 6
Proper use............................................................................................................................................Page 6
Description of parts and features.......................................................................................................Page 6
Technical data.....................................................................................................................................Page 6
Included items .....................................................................................................................................Page 7
Safety information..................................................................................................................Page 7
Installation.....................................................................................................................................Page 8
Timer function..............................................................................................................................Page 9
Cleaning and care....................................................................................................................Page 9
Disposal............................................................................................................................................Page 9
Warranty.........................................................................................................................................Page 10
Warranty claim procedure.................................................................................................................Page 10
Service .................................................................................................................................................Page 10

6 GB/IE/NI
List of pictograms used
Volt (direct current) Volt (alternating current)
Protection class II 6 hour timer which automatically
repeats daily
Short-circuit-proof safety
isolating transformer Polarity of output terminal
Independent lamp
control gear
This icon indicates that the product is
mains operated.
approx. 10 m This icon indicates that the length of
power cable is approx. 10m Splashproof
LED Tree
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the product as
described and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.
Proper use
This product is only suitable for opera-
tion outdoors. This product is intended
for use in private, domestic enviroment
only and not for commercial purposes.
Plugs for indoor use only.
Description of parts
and features
1Base plate
2Ground spike
3Power adaptor
4Hexagon key
5Stand pipe
6Hexagon screw
710 m Lead wire
8LED tree
9Timer button
10 Velcro cable tie
Technical data
LED tree 8+ Power adaptor 3:
Total power consumption: approx. 4.5 W
HG01313-BS / HG01313B-BS /
HG01313C-BS (LED cherry foam)
LED tree 8:
Operating voltage: 24 V
LEDs: 200 LEDs x 3 V ,
20 mA (LEDs are non-
replaceable)
Degree of protection: IP44 (splash-proof)

7GB/IE/NI
Model No.: HG01313-BS /
HG01313B-BS /
HG01313C-BS
Power adaptor 3:
Nom. voltage, primary: 220–240V∼,
50–60 Hz
Nom. voltage, secondary: 24 V , 3.6 W
Protection class:
Power adaptor (Model no. JT-DC24V3.6W-H3)
HG04147-BS (LED weeping willow)
LED tree 8:
Operating voltage: 31V
LEDs: 200 LEDs x 3 V ,
20 mA (LEDs are non-re-
placeable)
Degree of protection: IP44 (splash-proof)
Model No.: HG04147-BS
Power adapter:
Nom. voltage, primary: 220–240 V~,
50 - 60 Hz
Nom. voltage,
secondary: 31 V , 3.6 W
Protection class:
Power adaptor (Model no. JT-DC31V3.6W-H3)
Included items
1 LED tree, including 10m lead wire
(HG01313-BS - cool white)
(HG01313B-BS/HG01313C-BS/HG04147-BS
- warm white)
1 Stand pipe
1 Base plate
1 Ground spike
1 Power adaptor
1 Hexagon key
2 Hexagon screw
5 Spare petals (HG01313-BS / HG01313B-BS /
HG01313C-BS only)
2 Velcro cable ties
1 Operating instructions
Safety information
BEFORE USING THE PRODUCT, PLEASE FAMIL-
IARISE YOURSELF WITH ALL OF THE SAFETY
INFORMATION AND INSTRUCTIONS FOR
USE! WHEN PASSING THIS PRODUCT ON TO
OTHERS, PLEASE ALSO INCLUDE ALL THE
DOCUMENTS!
DANGER OF
DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN!
Never leave children unsupervised with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers. Please
keep children away from the product at all
times.
This product is not a toy. It does not belong in
the hands of children. Children are not able to
appreciate the dangers associated with using
the product.
This product can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction con-
cerning use of the product in a safe way and
understand the hazards involved. Children
shall not play with the product. Cleaning and
user maintenance shall not be made by children
without supervision.
Ensure that the product is installed by suitably
experienced or qualified persons only.
CAUTION! RISK OF OVERHEATING! Do
not operate the product inside the packaging.
Do not pull the 10 m lead wire 7and make
sure it is laid down properly so that no one
walks or trips over it.
The product can be used on all surfaces officially
classified as being of “normal flammability“.
Do not attach any other objects to the product.

8 GB/IE/NI
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage
available is the same as the required operating
voltage for the product (220–240 V∼).
Before connecting the product to the 10 m lead
wire 7you should always check the product
and the 10 m lead wire 7for any damage.
Never use the product if you discover that it is
damaged in any way.
This 10 m lead wire 7of the LED tree 8is
nonreplaceable. Hence if it becomes damaged
you must dispose of the entire product.
This product does not contain any parts which
can be serviced by the user. The LEDs cannot
be replaced.
Only use the product with the supplied power
adaptor 3for the type (Model No.
JT-DC24V3.6W-H3 for HG01313-BS/
HG01313B-BS/HG01313C-BS,
JT-DC31V3.6W-H3 for HG04147-BS); all
warranty claims will otherwise expire.
Never open any of the electrical parts or insert
any kind of object into them.
Protect the 10m lead wire 7from sharp
edges, mechanical loads and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the power adaptor 3from the
socket before installation, dismantling or cleaning.
Never touch the power adaptor 3or the LED
tree 8itself with wet hands.
The product must not be electrically connected
to another device.
If the product is not in use for any length of
time (e.g. holidays), disconnect it from the
power supply.
If you have any questions about the product or
are unsure about any of its aspects, please seek
the advice of an electrical equipment specialist.
The product is only suited for use with the in-
cluded power adaptor 3(Model No.
JT-DC24V3.6W-H3 for HG01313-BS/
HG01313B-BS/HG01313C-BS,
JT-DC31V3.6W-H3 for HG04147-BS).
Please note that the power adaptor 3continues
to draw a small amount of power even if the
product is turned off as long as the power
adaptor 3is plugged into a power outlet. To
switch the product off completely, unplug the
power adaptor 3from the socket.
The LEDs are not replaceable.
If the LEDs fail at the end of their lives, the
entire product must be replaced.
RISK OF EXPLOSION! Do
not use the product in explosive atmospheres
where flammable vapours, gases or dusts are
present.
Do not expose the product to any strong
vibrations or heavy mechanical stresses.
Make sure the 10 m lead wire 7is not laid
down in areas where lawn mowers, trimmers,
scissors or similar cutting tools are used.
RISK OF INJURY! Make
sure that, when the LED tree 8is removed, the
base plate 1and the ground spike 2are
also removed, so that they do not present any
risk (e.g. risk of stumbed by the base and
ground spike).
Installation
Note: Remove all packaging materials from the
product.
Remove the individual parts from the packag-
ing and mount the product according to figures
A–E. The site for the LED tree 8must be
selected in a way that it is erected on a solid,
level and vibration-free base. Anchor the tree
firmly to the ground and make sure that the LED
tree 8is stable!
Assembly without ground spike 2
(see fig. A1): Use four suitable screws and
dowels (not included) for the selected site un-
derground and mount the base plate 1.
Make sure that the recess on the tube of the
bottom plate does not apply to the recess
when fixing!
Installation with ground spike 2
(see fig. A2): Anchor ground spike 2to the
ground and mount base plate 1on it. When
fixing the standpipe 5on the pipe of the base

9GB/IE/NI
plate 1, make sure to position the space of
the pipe exactly where the spike 2is fixed
with the screw.
Further steps for both types of
installation:
Attach stand pipe 5to base plate 1and
tighten Hexagon screw 6with the help of
Hexagon key 4(see fig. B).
Attach LED tree 8to stand pipe 5and tighten
Hexagon screw 6with the help of Hexagon
key 4(see fig. C).
Bend the individual branches of the LED tree
8to the desired shape (see fig. D).
Plug the connector plug of lead wire into plug-in
power supply and tighten the screw connection,
in order to prevent moisture from penetrating
inside. Then plug the power adaptor 3into a
socket (see fig. E).
Use the velcro cable ties 10 to secure the lead
wire along the pipe (see fig. F).
Timer function
To switch on the timer function, press the timer
button 9after the product is connected to the
socket of power supply. The timer button 9
will light up when the timer function is activated.
The LED tree 8glows permanently for 6 hours
and will be followed by a subsequent pause of
18 hours. Afterwards, the LED tree 8will light
up again at its designated turn on time for 6 hours
followed by a subsequent pause of 18 hours.
To switch off the timer function, press the timer
button 9again and the light of the timer but-
ton 9will be turned off.
When the timer function is switched off, the
LED tree 8glows continuously. To turn off the
product completely, the power adaptor 3has
to be unplugged from the power socket.
Cleaning and care
DANGER OF ELECTRIC
SHOCK! First pull the power adaptor 3out of
the mains socket.
DANGER OF ELECTRIC
SHOCK! For reasons of electrical safety the
product must never be cleaned with water or other
liquids or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
cleaning.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.

10 GB/IE/NI
Warranty
The product has been manufactured to strict quality
guidelines and meticulously examined before deli-
very. In the event of product defects you have legal
rights against the retailer of this product. Your legal
rights are not limited in any way by our warranty
detailed below.
The warranty for this product is 3 years from the
date of purchase. Should this product show any
fault in materials or manufacture within 3 years
from the date of purchase, we will repair or replace
it – at our choice – free of charge to you.
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe location.
This document is required as your proof of purchase.
This warranty becomes void if the product has been
damaged, or used or maintained improperly.
The warranty applies to defects in material or
manufacture. This warranty does not cover product
parts subject to normal wear, thus possibly conside-
red consumables (e.g. batteries) or for damage to
fragile parts, e.g. switches, rechargeable batteries
or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
Please have the till receipt and the item number
(e.g. IAN 123456_7890) available as proof of
purchase.
You will find the item number on the type plate, an
engraving on the front page of the instructions (bot-
tom left), or as a sticker on the rear or bottom of the
appliance.
If functional or other defects occur, please contact
the service department listed either by telephone or
by e-mail.
You can return a defective product to us free of
charge to the service address that will be provided
to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect
is and when it occurred.
Service
Service Great Britain
Tel.: [phone]
E-Mail: [email protected]
Service Ireland
Service Northern Ireland
Tel.: [phone]
(0,08 EUR / Min., (peak))
(0,06 EUR / Min., (off peak))
E-Mail: [email protected]
Plugs for indoor use only.

OWIM GmbH & Co. KG
Stiftsbergstraße 1
DE-74167 Neckarsulm
GERMANY
Model-No.: HG01313-BS / HG01313B-BS /
HG01313C-BS / HG04147-BS
Version: 06 / 2019
Last Information Update: 06 / 2019
Ident.-No.: HG01313-BS/HG01313B-BS/
HG01313C-BS/HG04147-BS062019-GB/IE/NI
IAN 322401_1901