Mocka Addi Tallboy User manual

Addi Tallboy
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
bolt
x21
x8
A B C D E F G HJ
KLMN
I
O
Hardware Supplied
P
dowel
x28
screw
x60
slide
rail x6
slide
rail x6
slide
rail x6
slide
rail x6
locking
nut x21
screw
x4 x8
bolt
x28
locking
nut x28
small small
QR
wedge
screw screw
x33
x4
nut
S
key x1
Allen plastic
glide x4 dowel
x4
big
long
Allen
bolt x 4

Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 5x slide rail (F) and 5x slide rail (G) to panels [3] and [4]
as shown and secure with 30x screws (E). Tighten with a screwdriver.
Insert 14x bolts (C) into panels [3] and [4]. Tighten with a screwdriver.
Attach 1x slide rail (G) to panel [5] as shown and secure with
3x screws (E). Flip panel [5] and attach 1x slide rail (F) to the
other side of the panel as shown and secure with 3x screws (E).
Tighten with a screwdriver.
G
CR
E
F
E
G
E
G
E
G
E
G
E
G
E
C
C
CC
C
CC
F
E
F
E
F
E
F
E
F
E
C
C
C
C
C
CC
E
E
E
E
E
E
F
CL
E
G
CR
E
G
F
FLIP
3
5
5
4

Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Insert 1x bolts (C) into panel [6] Tighten with a screwdriver.
Attach panel [5] to panel [6] and secure with 1x locking nuts (D).
Tighten with a screwdriver.
Attach panel [7] to the panel [5] and secure with 1x screw (R).
Tighten with a screwdriver.
C
D
R
D
6
6
55
7

Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [6] and [7] to the panels [3] with 2x dowels (A) and
secure with 2x locking nuts (D). Tighten with a screwdriver.
Attach panels [8], [9] and [10] to the panel [3] with 5x dowels (A) and
secure with 5x locking nuts (D). Tighten with a screwdriver.
A
A
D
A
A
A
DD
D
6
33
7
8
8
9
9
10
D

Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Slide panel [11] between the grooves of panels [8] as shown. Attach panel [4] to the panels [6], [7], [8], [9], and [10] with 7x dowels (A)
and secure with 7x locking nuts (D). Tighten with a screwdriver.
A
D
D
A
A
A
D
D
D
8
8
8
8
11
4
7
6
9
9
10

Addi Tallboy
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Slide panel [11] between the grooves of panels [3] and [4] to form the
back of the unit, as shown.
Attach the legs [12] to panel [2] with 4x big dowels (S) and 4x nuts (L)
as shown. Secure with 4x long Allen bolts (Q). Tighten with an Allen
key (M).
×
S
L
Q
M
SL
Q
SL
Q
Q
Q
S
L
2
12
12
12
11
4
3

Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach panel [2] to the panels [3] and [4] with 4x dowels (A) and secure
with 4x screws (B). Tighten with a screwdriver. Attach 4x plastic glides (N)
to the end of legs [12].
Slide panel [11] between the grooves of panels [3] and [4].
2
A
A
A
B
B
B
B
N
N
N
N
N
11
4
3
3
4

Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver. Attach panel [1] to the unit with 6x dowels (A) and secure
with 6x locking nuts (D). Tighten with a screwdriver.
C
C
C
C
C
C
A
A
D
D
D
A
A
1
1
4
5
3

Drawers x2 Drawers x2
Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Insert 4x small bolts (O) into panels [13] and [14]. Secure panels
[15] and [16] to panels [13] and [14] with secure 4x small locking nuts (P).
Tighten with a screwdriver. Slide panel [17] down along the grooves between
panels [15] and [16] to form the base of the drawer.
Attach panel [18] to panels [15] and [16] using 4x screws (R).
Now attach 1x slide rail (I) to panel [16] and 1x slide rail (H)
to panel [15] as shown. Secure with 4x small screws (E) and
tighten with a screwdriver.
O
O
P
P
O
R
R
O
E
E
EH
I
E
13
14
15
16
15
16
15
15
16
16
17
18
13
14
13
14
13
14
13
14

Drawers x4 Drawers x4
Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
O
O
O
O
O
A
P
P
P
R
R
R
E
EH
E
I
E
15
15
15
15
16
16
16
16
20
21
22
19
x4
19
x4
19
x4
19
x4
19
x4
Insert 5x small bolts (O) into panels [19]. Secure panels
[15], [16] and [20] to panels [19] with 1x dowel (A) and
5x small locking nuts (P). Tighten with a screwdriver. Slide
panel [21] down along the grooves between panels [15] and
[16] to form the base of the drawer.
Attach panel [22] to panels [15], [16] and [20] using 6x screws (R). Now
attach 1x slide rail (I) to panel [13] and 1x slide rail (H) to panel [12] as
shown. Secure with 4x small screws (E) and tighten with a screwdriver.

Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
19 20
Insert the assembled drawers into the unit ensuring they slide smoothly
along the rails.
J
K
V
V
W
W
Z
Z
J
K
13
14
1
19
19
19
19
11
11
11

Addi Tallboy
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
12
21 22
You’re done, enjoy!
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is
balanced and steady before use.
X
Y
Z
wall
anchor
screw
strap
washer