Mocka Locka User manual

A B C D
Phillips screwdriver required
Hardware Supplied
handle
x2
bolt
x4
pin
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
E
wall mount
kit x1
F
clip
x4
plug
x4
Locka Console Table
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
G
door hinge
x2
H
door lock
x2
I
small screw
x4
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

12
Slide the legs [2] into the bottom of panel [1] until they click into place.
CLICK!
1
CLICK!
2
2
1
2
2
Locka Console Table
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Slide other panel [1] down into the legs [2] until they click into place. Slide panel [3] down along panel [1] as shown.
1
2
2
1
3
1
1
Locka Console Table
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Slide panel [4] down between panels [1] and [3] as shown. Insert panel [5] to form the base of the unit as shown.
5
4
1
31
1
Locka Console Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
78
Attach panel [6] to the top of the unit as shown. Insert 4x pins (A) into the underside of panel [6]. Bend down the metal
tabs on each side with a screwdriver.
6
5
1
x4
x4
x2
1
6
6
4
343
A
Locka Console Table
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Insert 4x clips (B) into the back and front clip brackets at your desired
shelf height as shown. Place the shelf panel [7] into the unit over the
clips to form the shelf.
8
7
6
1
x4
D
E
D
B
B
Locka Console Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
2 x
X2
C
I
C
I
Attach handle (E) to panel (8) with 2x bolts (D), Insert 2 x small
screws (I) into 2 x plugs (C). Tighten with a screwdriver.

11
12
Attach panel [8] to door hinge (G) as shown.
8
6
Locka Console Table
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x door hinge (G) to base as shown. Ensure it is facing in the
correct direction.

Locka Console Table
13 14
8
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x door lock (H) to door as shown, ensuring it clicks into place.
Repeat steps 11 to 13 for the second door.
CLICK
HH
H

15 16
Lift the completed unit into place, do not drag. Mark its height on the
wall with a pencil. Attach one end of the wall mount strap (F) to the
back of the unit with a 1x screw (F).
Screw the other end into the wall at the marked height with a wall screw
(not supplied). You’re done, enjoy!
F
Wall Mount
F
Locka Console Table
Assembly Instructions
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558