Mocka Daisy Entertainment Unit User manual

WARNING: Any furniture that is not anchored to a wall has the potential
to tip over in certain circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake. Accordingly, we
recommend that all furniture is anchored to a wall. We supply a free
safety wall anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device provided should
fit most wall types, but please note that different wall materials may
require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please
clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Wall Strap
A B C D E F G
H
Phillips & Flathead screwdrivers required
Hardware Supplied
dowel
x12
bolt
x6
locking
nut x6
long
screw
x10
nut
x4
screw
x4
screw
x32
handle
x2
bolt x4
long
I J KLM
wedge
x6
screw
x6
x2
washer
Z
Y
wall
anchor x1
X
safety
strap x1
WV
screw
x1
wall
screw x1
x4 x4
wheel wheel
N
screw
x6
Daisy Entertainment Unit
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the use of a power drill on a low-speed setting.

12
Attach panels [3], [4] and [5] to panel [1] using 6x dowels (E), 6x bolts
(G) and secure with 6x locking nuts (G). Tighten with a flathead
screwdriver.
Slide panel [2] between the grooves of panels [3] and [5] to form the back
of the unit.
5
4
3
1
G
F
F
F
F
E
E
G
E
G
EG
EG
E
G
2
5
3
F
F
F
Daisy Entertainment Unit
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach panels [3], [4] and [5] to panel [1] using 6x dowels (E), 6x bolts
(G) and secure with 6x locking nuts (G). Tighten with a flathead
screwdriver.
Slide panel [2] between the grooves of panels [3] and [5] to form the back
of the unit.
5
4
3
1
G
F
F
F
F
E
E
G
E
G
EG
EG
E
G
2
5
3
F
F
F
34
Attach panel [8] using 6x dowels (E) and 6x screws (N). Tighten with a
screwdriver.
Attach panels [9] and [10] together to form the legs using 4x long bolts
(A) and secure with 4x nuts (B). Tighten with a screwdriver.
E
E
E
E
E
E
10
10
9
9
8N
N
N
N
N
N
A
A
A
A
B
B
B
B
A
B
Ensure slot in
nut is facing
incoming bolt.
Daisy Entertainment Unit
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach the legs to panel [8] using 10x long screws (H). Tighten with a
screwdriver.
Attach 1x handle (C) to each door panel [6] and [7] and secure with 4x
screws (H). Attach 2x wheels (K) and (L) to each panel [6] and [7],
securing with 32x screws (M). Tighten with a screwdriver.
8
7
H
H
H
HH
H
H
H
H
H
6
DD
M
M
M
M
M
M
M
K
K
K
K
L
L
L
L
M
M
M
M
M
MM
DD
C
C
Daisy Entertainment Unit
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
78
Attach doors [6] and [7] by pressing the clip down on the back of the
door. Push the clip back up to lock into place.
Attach 6x wedges (I) to the back of the unit and secure with 6x screws
(J). Tighten with a screwdriver. Once assembled lift furniture into place,
do not drag.
6
7
back
OK
Note: If the door is not sliding smoothly or
sitting straight, there is a screw in the
middle of the wheel on the bottom of each
door that can be tightened/loosened until
the door is sitting properly.
I
J
I
J
Daisy Entertainment Unit
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Attach the safety strap (V) to the back underside edge of the top of the
unit using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
Attach the other end of the safety strap (V) to the wall with 1x wall plug
(X), 1x washer (Z) and 1x screw (Y). Tighten with a screwdriver. You’re
done, enjoy!
Z
V
W
V
W
Z
washer
X
Y
wall
plug
screw
strap
washer
Daisy Entertainment Unit
Assembly Instructions
6
mocka.co.nz | mocka.com.au