Mocka Savannah Side Table User manual

Savannah Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B
Hardware Supplied
screw
x4
screw
x8
C
dowel
x4
D
felt pads
x4
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

Savannah Side Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Attach 2x panels [2] to panel [3] as shown and secure with 2x screws (B)
and 2 x dowels (C). Tighten with a screwdriver.
Attach 2x panels [2] to panel [4] as shown and secure with 2x screws (B)
and 2 x dowels (C). Tighten with a screwdriver.
.
12
2
2
2
2
34
B
B
B
CC
C
C
B
C

Savannah Side Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [2] to panel [1] and secure with 8x screws (A). Tighten
with a screwdriver. Attach 4 x felt pads (D) to the bottom of panels [2]
as shown.
Flip over and lift the table into place, do not drag. You’re done, enjoy!
3
4
2
1
2
2
2
A
A
A
A
D
A
AA
A
D
D
D