Modena Vicino Series Owner's manual

User
Manual Book
Built-in Water Dispenser
Vicino Series
BP 3435
BP 6435

2
TABLE OF CONTENTS
Part 1: Safety Warnings 3
Part 2: Name of Parts 3
Part 3: Installation 5
Installation Notes 5
Installation Method 6
Connecting PE Hose to Water Dispenser 6
Part 4: How to Use 8
Control Panel 8
Getting Started 8
Part 5: Maintenance 9
Part 6: Problem & Solution 10
Part 7: Precaution 11
Part 8: Specification 12
This guide book explains everything you need to know about your new
product. Please contact our Customer Care should you need further
assistance through www.modena.com

3
•Read all instructions before using the water dispenser.
•Never clean parts with flammable fluids.
•Do not store or use any other flammable vapors and liquids in the
vicinity of this or any other water dispenser.
•During operation keep it beyond the children to avoid scald..
•Never turn on the heating switch when there is no water.
•Adopt the ground wire to avoid any electric shock.
•This appliance is not intended for use by persons (including children)
with reduced physicalsensory or mental capabilities or lack of
experience and knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person
•responsible for their safety.
•Children should be supervised to ensure that they do not play with the
appliance.
•If the supply cord is damaged,it must be replaced by the manufacturer
PART 1: SAFETY WARNINGS

4
Part names:
1) Control panel
5)
Watertray
2) Cold water tap
7)
Water Purifier inlet
3) Hot water tap
8)
Bottled water inlet
4) Watertray cover
8)
Pump –Selenoid switch
Installation Notes
•Before installation, the user should decide the water source to use the right
inlet according to the source.
•Dispenser should be installed in a flat, easily accessible, and secure place (not
tilted).
•Do not install the dispenser and power outlet in a damp or wet area. Make
sure the power outlet is grounded properly.
•It is recommended to add a power switch in front of the dispenser, to cut off
the electric current easily.
•This appliance is compatible to connect with bottled water (gallon) and water
purified tap water.
•Make sure that the PE hose is not bent to avoid blocking the water flow.
PART 2: NAME OF PARTS
PART 3: INSTALLATION

5
•If dispenser is installed on a cabinet, make sure that the space in the cabinet
has enough room for heat dissipation to avoid machine disfunction. Install the
appliance according to this instruction:
Installation Method
Set the cabinet position, the space should fit the dispenser according to the
specified size requirements.
Product size table:

6
Model
W (mm)
D (mm)
H (mm)
Remark
BP 3435
564
550
453
The buckle 5mm, Under the buckle 3mm
BP 6435
564
550
453
Connecting the PE Hose to the Water Dispenser
Prepare the PE hose, cut it flat at both ends. Separate the fastener from the blue
quick connector.
Insert the PE hose into the fastener ring up until the very end part. To see if it’s
secured, pull it using the same strength. If the hose does not move, then it is set
and will not fall off.

7
Insert the fastener into the space between the connector and hook ring to secure
the connection.
Dispenser is equipped with PE hose that requires a hole to insert the hose
through the back side of the cabinet.If the dispenser is installed on a cabinet, it
has to be secured.
Dispenser equipments must be set on the back of the cabinet, detach the water
tray and mark the position with the bolt on the bottom of the Dispenser, as
shown in the picture:

8
Connecting Bottled Water and Dispenser
Connect PE hose to the pipe for gallon, the connection method is same as install
hose method (no. 2)
Insert the pipe to the gallon and then plug the cover to mouth of gallon.
Insert the gallon and close the lower cabinet door.
If the water source is from water purifier, pull out PE hose from the pipe for
gallon, then connect the PE hose to the clean water outlet of water purifier.
Control Panel
Remark :
1
Water capacity button
5
Cold water tap button
2
Hot water setting button
6
Light button
3
Hot water tap button
7
Cooling system button
4
Display screen
Getting Started
1. Setting the amount of water
PART 4: HOW TO USE

9
Touch button once for to set the water capacity of 150ml, twice for 250ml,
and thrice to set continuous water flow.
2. Hot water temperature setting
Touch button once to set the hot water temperature, there are 3 options:
55°C, 85°C and 100°C. If you need room temperature water, set the
temperature to _°C.
3. To dispense hot water
Touch button once to dispense hot water, the hot water will flow out
according to the amount chosen in step 1. If the amount is set as
continuous flow, water will stop flowing once the finger is lifted from
button.
4. To dispense cold water
Touch button once to dispense cold water, the cold water will flow out
according to the amount chosen in step 1. If the amount is set as
continuous flow, water will stop flowing once the finger is lifted from
button.
5. Switching the light on
Touch button once to switch on the light, and then touch once again
to switch off the light.
6. Switching the compressor/Cooling system on
Touch button once to switch on the compressor, and then touch once
again to switch off the compressor.
7. Child lock activation
Hold the button 3 seconds activate and deactivate the Child Lock
•Do not pull the cable to remove plug from power socket. Pull the plug head
instead.
PART 5: MAINTENANCE
NOTE:
To keep the optimum function of the machine for an extended time, pay
attention to the maintenance. Power plug should be removed from the
power socket before starting the maintenance process.

10
•This dispenser has been disinfected before the shipping.
•Clean the hose, water tank, and heating element at least once a year by an
expert. This procedure will keep the machine in its best condition and prolong
the life. Do not dissassemble the machine by yourself to avoid damage on the
machine.
•Use soft damp cloth to clean the dispenser surface, and use soft dry cloth to
dry the surface. Do not let water get into the machine.
•Make sure the power cord is unplugged from the power source when
discarding excess water, during maintenance process, or when the appliance is
not used for a long time. Meanwhile, when the hot is not heated, open the
drain valve until there is no water in the appliance. Meanwhile, if the hot
water tap release cold water, let the valve open until there is no water left
inside the dispenser.
•If the display screen shows empty water icon, that means that the water
has run out. Change the water gallon with the new one immediately.
•In order to ensure the long term normal use of water dispenser, please check
the function regularly. When abnormality occurs, please notify the MODENA
Call Center.
If abormalities happen when in use, please stop using the appliance and unplug
the power cord, and check the following table to make sure of the appliance’s
condition. If necessary, please contact Modena Call Center.
Problem
Possible Cause
Recommended Action
Water is not hot
or not cold
• Excessive dispensation of hot
water or cold water ina short
period of time.
• Unit is not yet connected to
electricity.
• Wait until the water becomes
cold or hot.
• Connect the cord to the outlet
and press the heater and cooler
switches.
Water is not
being dispensed
out of the tap
• Water gallon is empty. The pipe
is stuck or block something.
• Replace the water gallon with a
new one.
• Turn off the switch cooling to 4
hours, then turn the switch back.
Leak on the
water gallon
support
Water gallon is leaking/ damaged
• Replace water gallon with a new
one, make sure the power cord is
unplugged.
Loud noise
Improper installation or
Install unit on even and stable
PART 6: TROUBLESHOOTING

11
Problem
Possible Cause
Recommended Action
during operation
placement of unit
surface
Error code - Err1
Hot temperature sensor is broken
Contact Modena service center
Error code –
Err2
Internal leakage
Contact Modena service center
•If the appliance is not going to be used for a long period of time, unplug it and
drain all water in its interior
•Wash and disinfect the system every 3-6 months with a suitable cleaner and
according to its instructions for use
•Do not pull out the cable to unplug. Do not turn on and o- the appliance by
connecting it and disconnecting it from the source of electricity
•If you are not using the appliance for a long period of time or during the night,
you can turn it o- to save energy
•The equipment must be installed keeping easy access to the electrical plug.
PART 7: PRECAUTION

12
Model
BP 3435
BP 6435
Type
Built-in water dispenser
Built-in water dispenser
Water output
Hot, Normal & Cold
Hot, Normal & Cold
Color
Black & Stainless
Black
Hot water output (liter/hour)
26
26
Cold water output(liter/
hour)
2
2
Hot water tank capacity
(liter)
without water tank
(instant)
without water tank
(instant)
Cold water tank capacity
(liter)
1.1
1.1
Hot temperature (Celsius)
55,85,100
55,85,100
Cold temperature (Celsius)
≤14
≤14
Free-CFC compressor
Yes
Yes
Water tank material
Stainless Steel
Stainless Steel
Heating power (watt)
2100
2100
Compressor power (watt)
120
120
Voltage / Frequency
220 V ~ / 50 Hz
220 V ~ / 50 Hz
Product dimension
595x560x455
595x560x455
Cut-out dimension
560x550x450
560x550x450
Specifications of this appliance may change without notice to improve the quality
of the product. Pictures in this manual are schematic and may not match your
product exactly. Values stated on the machine labels or in the documentation
accompanying it are obtained in laboratory in accordance with the relevant
standards. Depending on operational and environmental conditions of the
appliance, values may vary.
PART 8: SPECIFICATION

09/21
PT MODENA INDONESIA
Jl. Industri Raya I Blok D-8,
Jatiuwung, Tangerang 15135