MP-Man MP-FOL8 User manual

Copyright 2003 EZMAX. All rights reserved.
Advance permission of EZMAX is required to use User’s Guide, photos,
the related documents and software of the product. Any violation may
follow the legal measures.
The contents of the User’s Guide are subject to change without prior
notice for further improvement of the product.

1
Table of Contents
Before Use
1. Product & Accessories.......2
2. PC System Requirement....3
3. Safety Precaution ...........4
4. Features of Product.…….…..5
Designation of Product
1. Front/Rear View…….…..…….7
2. Side View………………..…….….8
3. Display...........................9
Preparation
1. Connecting Player to PC…. 10
2. Installing USB Driver.......11
3. Running Basic Functions. .19
4. Installing Logo Editor &
Applying Logo to Player ……… 22
Basic Functions
1. Basic Operation ..............23
2. Power ON/OFF................26
3. Mode Menu ...................27
4. Upgrade ……………………….34
Function Menus
1. PLAYBACK ..................37
2. EQUALIZER ................38
3. SRS ...........................39
4. DELETE ......................41
5. ENCODE ..................... 42
6. SETTING ....................43
7. DISPLAY ....................47
Others
1. About Battery….............48
2. How to set HOLD..........49
3. Trouble Shooting… ........ 50
4. Product Specification..... 52

2
!NOTE: Accessories are subject to change without prior notice for further
improvement of the product performance and quality.
1. Product & Accessories
1

3
The followings are the basic requirements of the PC to use the MP3
Player. Please carefully read and confirm the requirements.
 Pentium 200MHZ or above
 Windows 98SE / ME / 2000 / XP
(Windows 98 – Install Driver)
 Mac OS 9.0 / 10.0
 USB (Universal Serial Bus) Port
 CD-ROM Drive
 Hard Disc Space 20MB or above
(Additional capacity is required
to save the music file.)
 64MB RAM or above
!NOTE: Actually available built-in memory in this player is less than the
nominal capacity of the product because the FirmWare uses a
part of the capacity to drive the system.
2. PC System Requirements
1

4
Listening to Music…
The output class of the product guarantees the best possible sound of
the mid-size volume. As the high volume for a long time may damage
the hearing, listen to music in moderate volume.
Do not exposure to the strong shock or vibration.
Please take good care of handling the product and accessories. Dropping
on the floor or giving a shock may result in a serious damage of the
product.
Storing the Product…
Avoid storing in the extreme change of temperature, high humidity and
the strong magnetic field.
Cleaning the Product…
The chemical may discolor or damage the surface of the player. Use the
soft cloth to gently clean the player.
Using the Battery…
If you do not use the Player for a long time, do not insert a battery in the
Player.
!NOTE: Do not disassemble, repair or reconstruct the product.
3. Safety Precaution
1

5
Multi-Codec Player
Compatible with MP3, WMA and ASF (Audio) formats
Superior Sound Quality SRS (Sound Retrieval System) WOW
The introduction of the SRS allows the 3D surround effect, and the user
to define its own unique sound effect. Enjoy a new variety of the 3D
surround effects.
Organic EL Display
A Graphic display with blue EL4 line enhances the high-class image.
FirmWare Upgrading
Upgrade FirmWare to add/change/improve functions and performance of
the Player. Always enjoy the music in the latest version of performance.
Voice Recording
The superior sound quality voice recording function allows the clear
recording in the conferences and lectures.
FM Radio
Conveniently enjoy the FM radio with a variety of functions such as the
manual/automatic frequency search, automatic tune to the radio station,
and the station preset.
4. Features of the Product (1)
1

6
Simple and Fancy Design
Reflects the 2004 new design trend.
6 Preset Equalizer
You can produce your own sound quality with the 5-band User EQ and 5
recommend EQs including Normal, Classic, Pop, Rock and Jazz.
Easy Navigation
A tree configuration allows the easy search and control.
Caption the Text of the Song
The text of the song is shown in two lines on the display during the
playback.
Compatible with the Removable Disk Unit
It is recognized as a removable disk unit if connecting to the PC to
upload or download files without Manager program.
Direct Encoding
Use the LINE IN on the player to convert the external sound into the
audio file. Also use the FM radio to convert the radio broadcasting into
the audio file while listening to the FM radio.
Show My Own Sense of Logo on My Player
User can display the self-created logo on the Player..
4. Features of the Product (2)
1

7
1. Front/Rear View of the Product
2

8
2. Side View of the Product
2

9
3. Display
2

10
To download music files (MP3/WMA/ASF) from the PC, use USB cable to
connect MP3 Player to the USB port of the PC.
(Make sure to only use the USB cable supplied with the MP3
Player.)
Connect ‘A’ (large) to the USB port of the PC.
Connect ‘B’ (small) to the USB port found when opening USB port plug
on the Player.
1. Connecting Player to PC
3

11
Connecting USB cable to the Player displays the following screen in the
display on the Player.
1. Follow the instruction below for the PC of which OS is one of the
Windows ME, Windows 2000 and Windows XP.
A screen appears with a message saying, “New hardware is found” on
the PC as shown below. Follow the instruction to install the driver. The
installation may automatically be completed without showing the
installation screen depending on the PC environment.
An example here is for the WINDOWS 2000.
1) A message saying, “Found
New Hardware”
automatically appears.
2. Installing USB Driver (1)
3

12
2) The “Found New Hardware
Wizard” is automatically
started on the PC.
Click ‘Next’.
3) Click ‘Yes’ to continue the
installation.
2. Installing USB Driver (2)
3

13
4) Select “Assigned Location”
for the optional Search
Location, and then click
‘Next’.
5) If “Maker’s File Location to
Copy” is C:\Winnt\Inf or
C:\Windows\Inf, click ‘OK’.
If the file is not in the
C:\Winnt\Inf or
C:\Windows\Inf, use
‘Browse…’ to select.
2. Installing USB Driver (3)
3

14
6) Click ‘Next’ after completing
the search of the USB Mass
Storage Device.
7) Click ‘Yes’ to continue the
installation of the USB Mass
Storage Device.
2. Installing USB Driver (4)
3

15
8) Click ‘Finish’ after
completing the installation
of the USB Mass Storage
Device.
9) Click ‘Yes’ to continue the
installation of the disk
drive.
2. Installing USB Driver (5)
3

16
2. As the Windows 98 is not compatible with the removable disk unit,
you shall separately install the Win98 driver from the CD provided
with the Player.
1) Do not connect the Player as yet with the USB cable.
2) Insert the installation CD into the CD-ROM drive, and then run
‘install.bat’ in the Win98_Driver folder.
3) Connect the Player with the USB cable. “New Hardware Add Wizard”
is automatically started in the PC, showing “Search Driver – USB
Device”. Click “Next”.
4) Select “Search the most suitable driver for the unit
(recommendation)” for the “How do you want to proceed?” and then
click “Next”.
5) Click “Browse…” to select
C:\Windows\Inf, and then
click “Next
2. Installing USB Driver (6) – windows 98
3

17
6) Click “Next”.
7) Click “Finish” to complete
the installation of the
driver.
2. Installing USB Driver (7) – windows 98
3

18
Click [Start] – [Setting] –
[Control Panel] to open
“System” icon, and then
click “Hardware” – “Device
Manager” tab to check if
USB driver is properly
installed.
!NOTE: If any one of “MPMAN MP-FOL8 USB Device” in the “Disk
Drive” item and “USB Mass Storage Device” in the “Universal
Serial Bus Controller” item does not show on the list, or the
exclamation mark (!) in yellow or a message saying, “Other
Device” appears, the driver is not properly installed. Please
reinstall the driver.
For further details of the reinstallation, please refer to our
homepage.
2. Installing USB Driver (8) - Confirmation
3

19
As the PC recognizes the Player as a removable disk, you can easily
download or delete the music files in the Windows Explorer without
Manager program.
1. Copy File(Download)
1) Connecting the USB cable to the Player allows the Player to be
recognized as a removable disk in the Windows Explorer.
2) Select the removable disk to access to the memory area of the
Player.
3) Run one more Windows Explorer.
3. Running Basic Functions (1)
3