NBB SR8062-F User manual

Assembly Instructions
Shelter type: SR8062-F
SR8062-F-01-011121-USA

11
10
13
12
8
7
1
14
16
6
4
2
5
9
3
15
17
2
Exploded Parts
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 S1C Frame 2000 x 1035 6
2 Post P1 2000 1
3 ST1 Roof Tie 2220x40x40 1
4 CB1 Bracket - Slotted 110 x 110 x 40 7
5 JF1 Bracket 220 x 40 6
6 FT1 BRACKET 109 x 100 x 40 3
7 DR Bracket 110 x 40 x 52 8
8 AR2R 2m Pitch Rafter 2178 3
9
AR2CLT2 2m Apex
Roof centre lower trim
2m
2105 1
10
AR2POA AR2 Roof
Panel outer ALU
1155x1050 4
11
AR2CUT2 2m Apex
Roof centre upper
trim 2m
2110 1
12
AR2IS 2m Pitch Infill
Panel Shallow
2180 2
13
AR2TS 2m Apex Roof
Trim strip
1155 x 60 2
14
ARFS2 Apex Roof F
section 2m
2111 x 53 x 53 2
15 EC40 End cap 40 x 40 x 20 2
16 FT3 Bracket 109 x 100 x 80 5
17
40x40 Plastic End
Cap
STD. STOCK ITEM 3

3
PARTS LIST
ITEM NO. PART NUMBER
DRG
NUMBER
Size (inch) IMAGE
QTY.
1 S1C Frame
S1C
78.74 x 40.74 6
2 Post P1
P1
78.75 x 40.5 1
3 ST1 Roof Tie
ST1
40.35 1
4 CB1 Bracket - Slotted
CB1
4.3 x 4.3 x 1.57 7
5 JF1 Bracket
JF1
8.7 x 1.6 6
6 FT1 BRACKET
FT1
4.3 x 3.9 x 1.6 3
7 DR Bracket
DR
4.3 x 1.6 x 2 8
8 AR2R 2m Pitch Rafter
AR2R
85.75 3
9
AR2CLT2 2m Apex
Roof centre lower trim
2m
AR2CLT2
82.85 1
10
AR2POA AR2 Roof
Panel outer ALU
AR2POA
45.5 x 41.3 4
11
AR2CUT2 2m Apex
Roof centre upper
trim 2m
AR2CUT2
83 1
12
AR2IS 2m Pitch Infill
Panel Shallow
AR2IS
85 2
13
AR2TS 2m Apex Roof
Trim strip
AR2TS
45.5 x 2.3 2
14
ARFS2 Apex Roof F
section 2m
ARFS2
83.1 x 2 x 2 2
16 FT3 Bracket
FT3
4.3 x 3.9 x 3.1 5
17
40x40 Plastic End
Cap
EC40 1.6 x 1.6 3

4
FIXINGS

83.07
40.75
83.07
42.32
MEASURE THE WIDTH AND DEPTH
OF THE SHELTER TO CHECK
CORRECT ALIGNMENT.
Please note 1.5" Tec Screws
are for roof panels only
S1C
A
B
C
CB1
CB1
CB1
JF1
Ensure correct
alignment on all corners
JF1
DETAIL A
SCALE 1 : 10
DETAIL B
SCALE 1 : 10
DETAIL C
SCALE 1 : 10
Step 1
Assemble S1C frames to make up the main structure using CB1
brackets for the corners and JF1 brackets for the straight joints.
5

ST1
JF1
CB1
JF1
P1
EC40
EC40
EC40
ST1
P1
Step 2
Use JF1 and CB1 brackets to attach the P1 post and ST1 Tie bar .
6
INSERT PLASTIC END CAPS ( EC40 )
INTO ST1 AND P1

AR2IS
DR Bracket
AR2IS
AR2R
AR2R
AR2R
40.75 40.75
ENSURE
CORRECT
ALIGNMENT
OF RAFTERS
AND S1C FRAMES
Step 3
Attach A2R2 rafters using DR brackets. Secure the AR2IS End Panels to S1C
frames using 1" TECH Screws. The end rafters need to be placed in position at the
same time as the AR2IS .
7

Step 4
ARFS2
AR2CLT2
ARFS2
Attach the AR2CLT2 to the top of the rafters. The ARFS2 parts are to be
attached to the lower part of the rafter as shown below.
8

Step 5
AR2POA
AR2POA
AR2POA
AR2POA
AR2TS
AR2CUT2
AR2TS
FT1
FT1
FT1
FT3
FT3
FT3
FT3
Align the outer roof panels AR2POA with the outer edges of the shelter. Use
the AR2TS strips to seal the gap between the roof panels and cap off the
top with the AR2CUT2. Once the shelter is in its final position it can be
secured to the ground using FT3 and FT1 brackets and concrete bolts.
9

86 ROOF WIDTH
83
83
10
PLAN VIEW
OVERALL DIMENSIONS AND GROUND FIXING POSITIONS
Suggested size for concrete base: 8" oversized on all 4 sides.

11
MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
Email : [email protected]
Web : www.nobutts.com
Tel : [phone]
No Butts Bin Company, Inc. 16 Birch lane, Madison, CT 06443
All Parts and Fixings checked by:
Print Name: Signature: