NEC Aspire User manual

Page 1 of 2
North American Telecommunications Group
For Service: 604-856-9155 / [e-mail]
ASPIRE TELEPHONE QUICK REFERENCE
INTERCOM CALLS
Lift handset or press SPK, dial 3 digit extension
***press MSG key if no answer or busy to leave a voicemail message
TRANSFER ACALL
With active call, press HOLD, dial extension,
Announce call if desired (Optional)
Hang up for call to be transferred
PARK ACALL
With active call, press unlit PARK key.. key will then flash
To Retrieve Parked Call: press flashing PARK key
CALL PICK UP
To answer a call not ringing at your extension: lift handset, press ** and
dial extension number of telephone that is ringing
LAST NUMBER REDIAL
Press LND… last number will display.. lift handset or press SPK to dial
Or press arrow keys up and down to scroll
CALLER ID
Press LIST Soft Key
Press CID
Press ↑or ↓to review the latest calls to your extension
CONFERENCE CALLS
Establish 1 call, press CONF key,
Make 2nd call, press CONF key twice to join all calls
Repeat for up to 8 callers, max. 2 outside
CALL FORWARD
To call forward all calls to your voicemail: press CALL FWD, press 4, dial
600, press 2
TO CANCEL: press CALL FWD key, press 0

Page 2 of 2
North American Telecommunications Group
For Service: 604-856-9155 / [e-mail]
DO NOT DISTURB
Press DND and one of the following:
1= to block outside calls i.e. DID calls
2= to block paging, intercom and transferred calls (DID calls still ring)
3= block everything
4= to block just transferred calls
0= cancel any of the above
ONE TOUCH SPEED DIAL PROGRAMMING
Press CALL 1 key, Dial 855,
Press a one touch key, enter 9plus the desired telephone number to be
stored, press SPK key
HOT LINE KEY PROGRAMMING
Press CALL 1, dial 851
Press desired function key
Enter 01 plus the extension number you want stored; then press HOLD
PROGRAM SET NAME
Press SPK key, enter 800
Enter in your extension number
Spell out name; press HOLD
RING TONE:
Press SPK key, enter 820
Press 1to set intercom ring; 2to set external call ring
Dial code for desired ring pattern (1-8)
Press SPK