NEC AT-50 Instruction manual

NEC AT50 Quick User Guide
Making Calls using the Handset
1. Pick up the handset and wait for the dial tone
2. Dial the desired number
3. Replace the handset when you finish the call
Or, to preview the dialled number:
1. Dial the desired number with handset on-hook
2. You may press the ‘Delete’ key to erase dialled digits one at a time
3. When you have finished dialling, lift the handset
4. Replace the handset when you have finished the call
Answer Calls
1. Lift the handset when the phone rings
2. Converse with your caller
3. Replace the handset when you finish the call
Call Indicator /
Message Waiting Lamp
LCD Screen
Search Key
Dial Pad
Volume Keys
Delete Key
In Use Key
PBX Dial/Set Time Key
Flash/Pause Key
Redial Key
Mute Key

Memory Redial
Microphone Mute
The last ten telephone numbers dialled (up to 21 digits each) are stored in the outgoing
call memory. To dial from the outgoing call memory:
1. Press the ‘Search’ key until the ‘Out’ icon is shown on the display.
2. Advance up or down to search the phone number you want to dial using the ^ or v
volume keys.
3. When the desired phone number is displayed, press the ‘PBX Dial’ key, or lift the
handset. Dialling starts automatically.
4. Press the ‘Delete’ key to remove the displayed number from the list.
The Mute Key allows you to switch o the handset microphone temporarily.
To mute the call so that the called party cannot hear you, press the Mute Key and the
Mute LED will light up.
To cancel mute and resume normal conversation, press the Mute Key again and the LED
light will go out.
Last Number Redial
The last telephone number dialled (up to 32 digits) can be redialled automatically by
pressing the ‘Redial’ key.
1. Pick up the handset
2. Press the ‘Redial’ key
You can re-dial the same telephone number as many times as required. However, once
you dial another number, the previous number is erased.