NEC NEAXMail AD-40 User manual

NEAXMail AD-40
User Guide
To print this guide
1On the File menu, click“Print.”
2To print the entire book, choose“OK.”To print a
portion of the book, select the desired print range,
then choose“OK.”

NEAXMail AD-40
User Guide

To access your mailbox from inside your organization
1. Call the voice messaging system.
2. When the system greets you, enter:
Personal ID (if required)
Security code (if required)
For assistance, call:
Name
Extension
© 2000 ActiveVoice Corporation.
All rights reserved.
First edition 2000.
NEAXMail is a trademark of NEC America, Inc.
ActiveFax, ActiveNet, PhoneBASIC,TeLANophy,
ViewCall Plus,ViewFax, andViewMail are
trademarks of ActiveVoice Corporation.
Protected by one or more of the following United
Statespatents: 5,070,526; 5,434,906; 5,488,650;
5,533,102;5,568,540; 5,581,604; 5,625,676;
5,651,054;5,940,488; 6,041,114.
ActiveVoice Corporation
Seattle,Washington
U.S.A.
810-02886 Menu Mode

i▲
Contents
Introduction ii
Setting up your mailbox ................................... iv
Checking and leaving messages 1
Checking new messages .................................. 2
Leaving a message by phone ........................... 4
Sending a message by computer ..................... 6
Leaving a group message ................................ 8
Sending group messages by computer ............ 9
Reviewing messages ...................................... 10
Redirecting a message ................................... 12
Modifying a message...................................... 14
Canceling a message ..................................... 16
Archiving a message ...................................... 18
Recording a conversation by phone................ 20
Recording a conversation by computer........... 22
Changing your mailbox setup 25
Changing your greetings................................. 26
Changing your security code .......................... 28
Changing call transfer options ........................ 29
Changing call screening options ..................... 30
Changing call holding options ......................... 31
Changing message delivery options ............... 32
Using groups .................................................. 34
Changing groups ............................................ 36
Changing your recorded and spelled
names............................................................. 38
Sending and receiving faxes 39
Sending faxes by computer ............................ 40
Receiving faxes .............................................. 42
Changing fax setup......................................... 44
UsingViewCall Plus 47
Screening and managing calls........................ 48
Tracking calls .................................................. 50
PhoneBASIC .................................................. 51
Using E-Mail Integration 53
Checking e-mail by phone .............................. 54
Changing your e-mail setup options ............... 55
Your e-mail password ..................................... 56
Receiving e-mail by fax................................... 57
Managing GroupWise appointments
and tasks 59
Managing your appointments ......................... 60
Declining or accepting new appointments ...... 61
Receiving a fax of your appointments ............. 62
Managing your tasks ...................................... 63
Declining or accepting your new tasks ............ 64
Receiving a fax of your tasks .......................... 65
Using quick message actions and
shortcuts 67
Quick message actions................................... 68
Shortcuts ........................................................ 70
System menus ................................................ 72
Index............................................................... 73

ii NEAXMAIL AD-40 USER GUIDE▲
Introduction
Welcome to NEAXMail AD-40, a simple
yet powerful voice messaging system
that can greet your callers and record
your messages.You will find it quick
and easy to use.
On the phone
The voice messaging system lets you
control how your mailbox receives
messages and plays them back.You can
change these settings whenever you like,
from any phone.The phone options
consist of:
Menu conversation
The menu conversation leads you
quickly to your destination.You will
hear a menu of options. Enter the
number associated with the option to
perform the particular task.The voice
messaging system’s menu options are
diagrammed on page 72.
1 for Yes, 2 for No®
If you prefer, ask your system manager
to set up your mailbox with the 1 for
Yes, 2 for No conversation.This
conversation leads you step by step
through all of your options with easy,
yes-and-no questions. Just enter 1 for
Yes, 2 for No.
Shortcuts
To perform routine tasks quickly, you
can enter a sequence of numbers in
advance of the conversation questions
or menus.
Help
When the system conversation asks
you a question, enter 3 to hear a Help
menu of options.

iiiINTRODUCTION ▲
On the computer
If your system hasTeLANophy®, you can
manage live phone calls and all types of
messages visually on your computer
screen.TeLANophy is a suite of unified
messaging and call management
modules.TeLANophy consists of:
ViewMail®
All of your voice and fax messages are
brought together in one window with
ViewMail.You can access and prioritize
your messages and respond to them by
using your personal computer.
ViewMail for Microsoft Messaging
You can access all of your messages —
voice mail, e-mail, and faxes — in your
Microsoft Inbox, whether you are using
Exchange, Outlook, or theWindows
Messaging Inbox.
ViewFax®
You can send, receive, and redirect
faxes from your desktop computer.
ViewCall®Plus
All of your inbound and outbound
calls can be managed visually from
your desktop computer.With
PhoneBASIC™, you can customize your
call control applications by integrating
ViewCall Plus with other applications,
such as Microsoft’s Office suite.
E-Mail Integration for cc:Mail and
Novell GroupWise
You can access your e-mail messages
by phone.With the E-Mail Reader’s
text-to-speech application, you can
hear your e-mail messages over the
phone. If your system uses Active Fax™,
you can send the messages to any fax
machine.
Also, you can access all of your
messages — voice mail, e-mail, and
faxes — in your GroupWise mailbox.
Help
For more detailed information about
TeLANophy, use the:
• Online Help system (press F1 or
use the Help menu)
• IntroducingTeLANophy tutorial

iv NEAXMAIL AD-40 USER GUIDE▲
Setting up your mailbox
First, fill in the blanks on the inside front
cover of this guide and perform the
procedure“To access your mailbox from
inside your organization.” This makes
your mailbox ready to use and enrolls
you on the system as a subscriber.
The system will ask you a few simple
questions to record your name, spell
your name (if required), record a
personal greeting, and set your
security code.
Your system manager has assigned you
a personal ID. As soon as you hear the
system greeting, enter your personal ID.
This tells the system who you are and
allows you to check messages or leave
messages.
You should also set up a security code
that only you know. This prevents
someone else from hearing your
messages.You can change your security
code as often as you like.
After you have set up your mailbox
by phone, you can also begin using
TeLANophy.* Contact your system
manager to getTeLANophy set up
on your desktop.
To set up your mailbox
1Access your mailbox (see inside front
cover).
2Answer the system questions. Enter 1
forYes, 2 for No. If you are not sure,
enter 2.You can always change the
option later.
3When the system tells you that your
mailbox is set up, enter 1 to confirm
your settings.
TIP
Toexitthesystemquickly,enter ✱three
ormoretimes.Orhangupandthesystem
willexitautomaticallyafterafewseconds.
* This feature may not be available at your site.

1▲
Depending on the options installed on
your system, you can use a phone or
computer to:
•Check new messages
•Leave a message to one or more
subscribers or guests
•Leave a message to a group
•Review messages
•Redirect a message
•Modify or cancel a message after
leaving it
•Archive a message
•Record a conversation
Checking and leaving messages

2NEAXMAIL AD-40 USER GUIDE▲
Checking new messages
Checking new messages
by phone
New messages are messages that you
have not yet heard.The system notifies
you when you have new messages.
The system plays all urgent messages
first, then all regular messages. It also
sorts your messages by sender. If the
system does not know who left a mes-
sage, it says that the message is“from
your message box.”
After you listen to a message from a
subscriber, you can reply immediately;
you don’t have to dial the subscriber’s
extension.
To check new messages
by phone
1Access your mailbox (see inside front
cover).
2Enter 4 to check new messages.
Follow the system instructions. Enter
1 forYes, 2 for No.
Optional playback features*
The system manager can set up special
options for your mailbox to:
• Play your new messages automatically
each time you call the system.
• Provide additional security by always
requiring both a personal ID and a
security code to play messages.
• Identify you automatically when you
are using your assigned extension.
• Tell you how long it will take to play
your messages.
* One or more of these features may not be available
at your site.
SEE ALSO
Modifyinga message ................................... 14
Cancelinga message.................................... 16
Shortcuts....................................................... 70

3CHECKING AND LEAVING MESSAGES ▲
Checking new messages
by computer*
If your system usesViewMail,ViewMail
for Microsoft Messaging, or the Novell
GroupWise integration, you can check
messages visually by your computer.
Information about each message is
provided on the screen.When available,
names, phone numbers, and a subject
are included with messages.ViewMail
also provides the length of the message
and the time it was sent.
You can listen to messages either with
a computer sound device or a phone.
To check new messages from
your computer
1Double-click the message to open it.
2Use theVCR-style buttons to play
and respond to the message.
Urgent voice message
Fax message
Voice message
VCR-style buttons
*Oneormoreofthese featuresmaynotbeavailableat
yoursite.

4NEAXMAIL AD-40 USER GUIDE▲
Leaving a message by phone
The system lets you leave voice messages
for subscribers, groups, or guests. If you
call a subscriber’s extension and the call
is unanswered, your call is automatically
routed to the subscriber’s mailbox, where
you can leave a message.You can also
leave messages directly in a subscriber’s
mailbox.
If your phone system uses identified
subscriber messaging, the system
automatically tags a message from your
assigned extension with your name.
If your phone system does not use
identified subscriber messaging, or you
are calling from another subscriber’s
extension, you need to identify yourself
as a subscriber by entering your personal
ID and security code.
SEE ALSO
Shortcuts....................................................... 70Modifyingamessage ................................... 14
Cancelinga message.................................... 16
Directory assistance
Your system may use automatic directory
assistance, numeric directory assistance,
or both, to help callers find subscribers’
extension numbers.
Callers with letters on their phones
can use automatic directory assistance,
which identifies subscribers by their
last names. All callers can use numeric
directory assistance, which groups
subscribers by department, location,
or some other category.
Special delivery options
When you leave an identified subscriber
message, you can mark it with one or
more of these special delivery options:
Urgent
The message is played first, before
regular messages.
Private
The message cannot be redirected.
Return receipt
The system tells you when a subscriber
has heard the message.
Future delivery
The message is delivered at the time
and day you specify.

5CHECKING AND LEAVING MESSAGES ▲
1Access your mailbox (see inside front
cover).
2Enter 5 to leave any messages.
3On the phone, spell the subscriber’s
name. Otherwise, enter the extension
number.
When spelling a subscriber’s last
name, use a“wild-card” number
(typically 0 or 1) for any letter in
the last name you do not know.
4Enter 2 until you hear the name of the
subscriber you want, then enter 1.
To leave a message directly in a subscriber’s mailbox
5Record your message at the beep. The
message must be at least 3 seconds
long to be delivered.
6Enter ##
##
#to start over or ✱to stop
recording.
To leave an identified
subscriber message
1Call another subscriber.When the
subscriber does not answer, the call is
forwarded to voice mail.
2Enter 5 to leave a message.
3Follow the system instructions. Enter
1 forYes, 2 for No.

6NEAXMAIL AD-40 USER GUIDE▲
Sending a message by computer
Depending on the optional TeLANophy
applications on your system, you can
use ViewMail,ViewMail for Microsoft
Messaging, or Novell GroupWise
integration to send voice messages by
computer.
To send a message
by computer
1If you are usingViewMail, click
“Send.” If you are usingViewMail for
Microsoft Messaging, click“New
voice message.”
2Click“To” and then use the address
book to select recipients’ names.
3Type in a subject and set delivery
options as needed.
4Use theVCR-style buttons and your
phone or a sound device to record the
message.You can also add sounds
from the clipboard or from aWAV file.
5To send the message, choose“Send.”
For composing and
sending a message
For selecting
special delivery options

7CHECKING AND LEAVING MESSAGES ▲
WithViewMail for Microsoft Messaging,
you can send aViewMail message to
another subscriber by using theViewMail
address book.
You also can send aViewMail message
to someone outside the voice messaging
system.When you use the Microsoft
Messaging address book, theViewMail
message is sent as an e-mail message
with an attachedWAV file.
With the E-mail Integration for Novell
GroupWise, you can leave a voice
message as an attachment to an e-mail
message.
For composing
and sending a
message
For addressing a message
to multiple subscribers or
message groups
For selecting
an address

8NEAXMAIL AD-40 USER GUIDE▲
Leaving a group message
You can leave a message for more than
one subscriber either by:
• Leaving the message for a message
group.
• Adding names to the address list.
A message group is a mailing list of
subscribers and guests.Your system
manager can create message groups or
you can create your own message groups.
To leave a group message
by phone
1Access your mailbox (see inside front
cover).
2Enter 5 to leave a message.
3Spell the group name, or enter the
special group ID and group number.
Enter 2 until you hear the name of the
group you want, then enter 1.
4After the beep, record your message.
The message must be at least 3
seconds long to be delivered.
To leave a message to several
subscribers by phone
1Leave a message for the first
subscriber.
2Enter ✱6 to stop recording.
3Follow the system instructions to add
a subscriber as a message recipient.
4Repeat step 3 for each subscriber you
want to receive the message.
The system tells you when everyone in a
group has received your message. If you
do not get this confirmation, you can ask
the system who in the group has not yet
heard the message.
To find out who has not heard
a group message by phone
1Start to leave a new message to the
group.
2The system says that some members
have not heard your last message.
Enter 1 to review the message.
3Listen to the message or enter 2 to
interrupt it.
4Enter 2 to avoid canceling the
message.
5Enter 7 to list who has not heard the
message. Enter ✱to stop the list.

9CHECKING AND LEAVING MESSAGES ▲
Sending group messages by computer*
For addressing a message to multiple
subscribers or message groups
* This feature may not be available at your site.
WithViewMail andViewMail for
Microsoft Messaging, you can either
choose more subscriber names or a
group name from theViewMail address
book. Create your groups by phone or
ask the system manager to create your
groups for you.

10 NEAXMAIL AD-40 USER GUIDE▲
Reviewing messages
To review messages by phone
1Access your mailbox (see inside front
cover).
2Enter 6 to review old messages.
3Follow the system instructions. Enter
1 forYes, 2 for No.
TIP
Enter ✱to skip a message. Enter 3 7 to
archive a message.
SEE ALSO
OnlineHelp:
ViewMail,Opening messages
ViewMail for Microsoft Messaging,To set
preferences for saving sent voice messages
You can review old messages and
archived messages by phone or by
computer.
Reviewing messages by phone
After you have heard a new message, the
system saves it for a set amount of time
(for example, until midnight).

11CHECKING AND LEAVING MESSAGES ▲
Reviewing messages
by computer*
ViewMail andViewMail for Microsoft
Messaging list all of your opened (old)
messages in your mailbox until the
system deletes them at the set time,
usually at midnight every night.
To review an old message
by computer
1Double-click the message.
2Use theVCR-style buttons to play
the message.
Old message
Opened message
* This feature may not be available at your site.
New message
New message

12 NEAXMAIL AD-40 USER GUIDE▲
Redirecting a message
The system lets you:
• Redirect a message to another
subscriber.
• Record an introduction to the
message.
• Use special delivery options.
The system does not let you redirect
messages that are designated as private
by the original sender.
To redirect a message
by phone
1While listening to a message, enter
3 9 to interrupt it.
2Spell the last name of the subscriber
to whom you are redirecting the
message.
3Enter 1 to confirm that you want to
redirect the message.
Redirecting a message
by computer*
You can redirect a message to other
subscribers usingViewMail andViewMail
for Microsoft Messaging.When you re-
direct a voice message, the New Message
form opens as follows:
• The subject field contains“FW:”
to indicate the message is being
redirected.
• The original voice message is
included.
SEE ALSO
* This feature may not be available at your site.
Online Help:
ViewMail, Redirecting messages
ViewMail for Microsoft Messaging,
Forwarding a voice message
Leaving a message by phone:
Special delivery options ................................ 4

13CHECKING AND LEAVING MESSAGES ▲
For redirecting a message
For redirecting the message to other
subscribers, groups, or guests
To redirect a message
by computer
1Select the message.
2Click “Redirect.”
3Click“To” and then use the address
book to select recipients’ names.
4Type in a subject and set delivery
options as needed.
5Use theVCR-style buttons and your
phone or a sound device to record an
introduction.
6Choose“Send” to send your message.