nedis HTFA16GY User manual

Ceramic Fan Heater
Article number: HTFA16GY/HTFA17GY
Nedis BV
De Tweeling 28, 5215 MC ’s-
Hertogenbosch, The Netherlands 03/22
Preface
Thank you for purchasing the Nedis HTFA18WT/HTFA19WT.
This document is the user manual and contains all the information for correct, efficient and
safe use of the product.
This user manual is addressed to the end user. Read this information carefully before
installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
•The Nedis HTFA16GY/HTFA17GY is a heater that allows the user to control the
surrounding temperature.
•This product is only suitable for well insulated spaces or occasional use.
•The built-in thermostats measures the room temperature.
•And the built-in thermostat automatically switches off the product when the desired
room temperature is reached.
•When the room temperature decreases below the desired temperature, the product
switches back on automatically.
•The bottom of the heater is equipped with a tip-over safety switch.
•This switch automatically switches off the product if it falls over.
•The Nedis HTFA16GY/HTFA17GY is equipped with an oscillation mode. During the
oscillation mode the base of the product rotates slowly from side to side.
•This product can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the product in a
safe way and understand the hazards involved. Children shall not play with the
product. Cleaning and user maintenance shall not be done by children without
supervision.
•Children of less than 3 years should be kept away.
•The product is intended for indoor use only.

•The product is intended for use in household environments for typical housekeeping
functions that may also be used by non-expert users for typical housekeeping
functions, such as: shops, offices other similar working environments, farm houses,
by clients in hotels, motels and other residential type environments and/or in bed and
breakfast type environments.
•Any modification of the product may have consequences for safety, warranty and
proper functioning.
Specifications
Product
Ceramic Fan Heater
Article number
HTFA16GY/HTFA17GY
Dimensions (l x w x h)
9.2 x 15 x 21 cm
11.5 x 16.5 x 24 cm
Input power
220 - 240 V ~ 50 / 60 Hz
Heating power
1500 W
Electrical class
II

Main parts (image A)
A
①Air outlet
②Base
③Handle
④Air inlet
⑤Power plug
Control panel (image B)
B
①Mode dial
②OFF position
③Fan mode
④Low heat mode
⑤High heat mode
⑥Oscillation mode button*
⑦Thermostat dial
*Only for HTFA17GY

Safety instructions
⚠WARNING
•Ensure you have fully read and understood the instructions in this document before
you install or use the product. Keep the packaging and this document for future
reference.
•Only use the product as described in this document.
•Misuse of this product can result in serious injury.
•Do not use the product if a part is damaged or defective. Replace a damaged or
defective product immediately.
•Do not use the product if the surface is cracked.
•Do not drop the product and avoid bumping.
•Always check that the voltage of the product corresponds to the mains voltage.
•Only plug the cable into a wall outlet. Do not use extension cords.
•Do not plug the product in a power outlet of a power group with other products that
consume a lot of power.
•Do not plug the product in a power outlet with a current of less than 10 A.
•Do not let the power cable hang over the edge of a table or counter, or touch hot
surfaces.
•Do not leave the product unattended when the product is connected to the power
outlet.
•Unplug the product from the power source before service and when replacing parts.
•Do not locate the product immediately below a power outlet.
•Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
•Do not use external timers or remote control systems to switch the product on or off.
•Unplug the product from the power source if problems occur.
•Unplug the product and set dials to zero when not in use and before cleaning.
•To avoid overheating, do not cover the product. Keep a distance of at least 1 meter
from textiles, curtains, tent cloths and other flammable objects to reduce the risk of a
fire.
•Keep objects at least 50 cm from the air inlet.
•Keep objects at least 1 meter from the air outlet.
•Do not use the product outdoors, the product is designed for indoor use.
•Do not use this heater in the immediate surroundings of a bath, a shower or
swimming pool.
•Do not expose the product to water or moisture.
•This product may not be used by persons (including children) whose physical,
sensory or mental capabilities or lack of experience and knowledge prevents them
from using the product safely without supervision or instruction.
•Children should be supervised to ensure that they do not play with the product.
•Any modification of the product may have consequences for safety, warranty and
proper functioning.
•If the power cable is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
•This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.

Explanation of the safety symbols on the product
Icon
Description
To avoid overheating, do not cover the product.
Explanation of the symbols on the product or packaging
Icon
Description
Indication to explain that the product needs to be collected
separately when disposed. Do not throw in the trash bin.
Electronic equipment needs to bear the CE mark in order
to be marketed in the EU. CE marking shows that a
product is assessed before being placed on the market
and that it meets EU safety, health and environmental
protection requirements. CE marking is also sometimes
accepted as a means of compliance with type-approval
requirements; for example, electronic components that
require type-approval and also CE marking for
electromagnetic compatibility (EMC) or low-voltage
equipment.
Installation
Check that all parts are present and that no damage is visible on the parts. If parts are
missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Before first use
1. Remove all packaging.
2. Place the product on a stable and flat surface.
⚠Keep objects at least 50 cm from the air inlet A①.
⚠Keep objects at least 1 meter from the air outlet A①.
3. Connect the power plug A⑤into a power outlet.
⚠Do not plug the product in a power outlet of a power group with other products that
consume a lot of power.
⚠Do not plug the product in a power outlet with a current of less than 10 A.

Use
Using the product
1. Switch the mode dial B①to the desired mode:
Mode
Fan
Heater
OFF position B②
Off
Off
Fan mode B③
On
Off
Low heat mode B④
On
1000 W power
High heat mode B⑤
On
1500 W power
Oscillation mode B⑥
On
1500 W power + oscillation*
* = The product rotates slowly over the base from side to side.
2. Rotate the thermostat dial B⑦to adjust the desired room temperature.
- When the room temperature reaches the selected level, the built-in thermostat
automatically switches off the product.
- When the room temperature decreases, the built-in thermostat automatically
switches the product back on.
⚠The tip-over safety switch automatically switches off the product when it falls over.
Before using the product again: Switch off the product, disconnect the power plug and
check for damage.
⚠Do not use a damaged or defective product, but return it for repair or replacement.
Stop using the product
1. Switch B①to the OFF position B②.
2. Unplug A⑤from the power outlet.
3. Allow the product to cool down.
Maintenance
Cleaning the product
1. Before cleaning and maintenance, switch off the product and disconnect the power.
2. Allow the product to cool down.
3. Clean the outside of the product with a soft, clean, lightly damp cloth.
4. Clean the openings of the product with a fine brush.
⚠Do not immerse the product in water or other liquids.
⚠Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone
when cleaning the product.
⚠Avoid abrasives that can damage the surface.

Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability
for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible
for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and
product names are trademarks or registered trademarks of their respective owners and are
hereby recognized as such.
Disposal
This symbol indicates that this product should not be thrown away with other
household waste throughout the EU. To prevent possible harm to the
environment or human health by uncontrolled waste disposal, you are
responsible for recycling it so that it can promote the sustainable reuse of raw
materials. To return your used product, you can use the regular return and
collection systems or contact the store where the product was purchased. They
can recycle this product for the environment.