Neilsen CT3772 User manual

MERCEDES BENZ M271 ALIGNMENT TOOL SET CT3772
INSTRUCTION MANUAL
GENERAL
This retaining device makes it possible to position the camshafts into the
installation position.
Retainer to draw in the timing chain.
To retain timing chain with camshaft sprockets in mesh.
For Mercedes Benz M271
CONTENTS
1. Camshaft Locking Tool,
to be used as OEM 271589006100
2 .Cam Chain Tensioner Rail Wedge,
to be used as OEM 271589003100
3. Cam Chain Retaining Bridge,
to be used as OEM 271589014000
4.Cam Chain Tensioner Drift,
to be used as OEM 271589001500
5 Bit Socket, TX100

APPLIATIONS
This tool set is designed for checking and setting the engine timing on following
Mercedes models:
Mercedes
Model
type
motor
CLK 200K
W209
M271
E18ML (02-)
DE18ML (03-05)
E16ML (08-)
DE18LA (09-)
C160K, C180K,
C200K, C230K
W203
E200K
W211
SLK 200K
R171
C180K, CLC180K
CLC200K,
C180CGI
C200CGI,
C250CGI
W204
E200CGI,
E250CGI
W212, C207
SAFETY INSTRUCTIONS
1. Do not use the tool if parts are missing or damaged.
2. Use the tool for the intended purpose only.
3. Never place the tool on the vehicle battery. There is a risk of a short circuit.
4. Be careful when working with the engine running. Loose clothing, tools and
other objects can be caught by rotating parts and cause serious injury.
5. Keep children and other unauthorized persons away from the work area.
6. Be careful when working on hot engines because of the risk of burn injuries.
7. If you remove the ignition key before repairing, you can prevent the engine
from being started accidentally and resulting in engine damage.
Note: This manual serves as a brief guide and does not replace a workshop
manual. Always refer to the vehicle-specific service literature, particularly the
technical data such as torque values and instructions for disassembly/assembly,
etc.
8. After repair or before starting the engine, turn a minimum of 2 turns by hand
and check the timing again.
9. Turn the engine only in the normal direction of rotation (clockwise unless
otherwise specified).

INSTRUCTIONS FOR USE
1. Camshaft Locking Tool,
to be used as OEM 271589006100
keeps the camshaft in the
setting position.
2 .Cam Chain Tensioner Rail Wedge,
to be used as OEM 271589003100
is used to push back and hold
the timing Chain tensioning rail.
3. Cam Chain Retaining Bridge,
to be used as OEM 271589014000
is used to hold the timing chain
during e.g.separating timing chain.
4.Cam Chain Tensioner Drift,
to be used as OEM 271589001500
is used to insert the closure plug.

CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
www.cannontools.co.uk