Niko DALI-2 BMS User manual

Niko-Servodan A/S •Stenager 5 •DK-6400 Sønderborg • tel [phone] •[e-mail] •www.niko.dk
1(7)
41Y742_743_745_03_R0_180618CWH_GB
User manual / EN
Use
DALI-2 BMS detector 360° is used to detect presence and to measure the
actual light level. The detector is connected directly to a DALI bus.
The detector can be installed in connection with a BMS / CTS system.
This gives an effective and energy-saving solution that is integrated with the
application controller.
The detector is DALI-2 compliant and complies with the relevant DALI
standards. The detector has its own address range on the DALI bus,
which means that the number of detectors does not affect the number of
luminaires that can be connected to the DALI bus.
Function
The detector is connected to the DALI bus. To achieve complete coverage
when using several detectors, is an overlap of approximately 30 %
recommended. Fig. 2.
The detector does not contain a full daylight control. It can only provide
information about presence and lux level. The underlying application
controller must be able to handle daylight control.
Installation
Location:
The detector responds to movement and heat in the surroundings. Avoid
positioning the detector close to heat sources such as cookers, electric
radiators or ventilation systems or moving objects such as hanging mobiles,
etc. This may result in unintended activation. Fig. 1.
Type no. 41-742 41-743 41-745
Flush mounted Fig. 3. •
Surface mounted Fig. 4. • •
Installation height 2-3,4 m • •
Installation height 4-8 m •
Installation height - type 41-742 and 41-743:
The recommended installation height for this detector is 2–3.4 m. 2.5 m is
the ideal installation height. At this height, the detector has a range of Ø20 m
on ground level and Ø13.5 m at 80 cm table height (without lens cover).
Fig. 6.
Installation - type 41-745:
The recommended installation height for this detector is 4–8 m. At this
height, the detector has a range of Ø16–32 m on ground level (without lens
cover). Fig. 7.
Connection:
The detector must be connected to the DALI bus. Once connected, the
detector will be ready to operate after approx. 2 minutes (warm-up time).
Connect the detector according to the connection diagram. Fig. 8.
Setting
Factory setting:
Sensitivity: High sensitivity, all segments
Lux range: 0 - 1023 lux
All settings of sensitivity and lux are made via the application controller. Table 1.
In addition, an IR remote control type 41-934 (accessory) can be used for
testing,
settings of sensitivity and for software version control. Fig. 10-14.
In order to use the IR remote, the detector must be provided via the DALI
bus.
In order to change settings, the detector must be unlocked. The detector
is automatically locked after ve minutes if this is not done manually. Any
changes to settings will be saved. When settings have been programmed,
the green LED turns off briey, acknowledging that information has been
received correctly. Fig. 9.
Lock/unlock:
Press "Lock / unlock" once to unlock the detector for setting. The green LED
lights up when the detector is in the setting mode.
Press "Lock / unlock" again to lock the detector - operating mode. The green
LED turns off.
Presence and motion detector DALI-2 BMS
41-742, 41-743 and 41-745
Valid for software version 2 - see version no.
All manuals and user guides at all-guides.com
all-guides.com

2(7)
41Y742_743_745_03_R0_180618CWH_GB
Niko-Servodan A/S •Stenager 5 •DK-6400 Sønderborg • tel [phone] •[e-mail] •www.niko.dk
User manual / EN
Lux range:
Choose between two lux ranges
Normal lux range 0 -1023 lux
High lux range 0 - 10360 lux
Table 1.
Sensitivity:
It is possible to change the sensitivity of the detector or to disconnect
individually for Segment A, B or C. Tabel 1.
Walk test:
To check that the detector detects correctly, it is possible to perform a walk
test. In walk test the LED will indicate which segment is being activated. Seg-
ment A is indicated via red LED, segment B is indicated via green LED and
segment C is indicated via blue LED. Fig. 5.
The detector must be set in walk test mode to do this. Fig. 10.
Walk test can only be activated via IR remote control 41-934 (accessory).
Operation & maintenance
Dirt affects the operation of the detector and the detector’s lens must
therefore be kept clean. Use a damp cloth for cleaning. Use water mixed
with normal cleaning agent. Avoid pressing hard on the lens. If the lens or
other parts of the detector are defective, it must be replaced.
Technical data
Input:
Supply voltage......................................... via the DALI bus
Power consumption ................................ 7 mA
Performance:
Lux range................................................ 0 - 1023 lux
0 - 10360 lux
Detection area ........................................ (3-120°) 360°
Sensitivity................................................ 4 settings
Protection class (gasket is mounted) ......... IP 54
Colour.................................................... RAL 9010 (white)
Ambient temperature.............................. -5°C ... +50°C
Performance - type no. 41-742 and 41-743:
Detection range for body movement
(at installation height of 3 m).................... 450 m²
Range for small movements
(at 2.5 m installation height)..................... 9 m²
Installation height..................................... 2 – 3.4 m
Performance - type no. 41-745:
Detection range for body movements ..... Ø16-32
Installation height ..................................... 4 – 8 m
Certications:
CE in accordance with.............................EN 60669-2-1
Standards:
DALI....................................................... IEC 62386-101
IEC 62386-103
IEC 62386-303
IEC 62386-304
Accessories
IR remote control....................................41-934
LED status
Overview of LED status:
Status Indication
Unlock The green LED lights when the detector is being
programmed and is ready for conguration via the
IR remote control 41-934 (accessory).
Lock The green LED turns off. The detector is locked
and the most recently programmed
changes are saved.
Walk test
Sektor A
The red LED will ash when activity is detected
in segment A. Fig. 10.
Walk test
Sektor B
The green LED will ash when activity is detected
in segment B. Fig. 10.
Walk test
Sektor C
The blue LED will ash when activity is detected
in segment C. Fig. 10.
IR remote control
41-934 (accessory)
Each time the detector receives a correct signal
from the IR remote control, the detector will
acknowledge by briey turning off the green LED if
the detector is being programmed.
Environment
This product and/or the batteries provided cannot be deposited in
non-recyclable waste. Take your discarded product to a recognised
collection point. Just like producers and importers, you too play an
important role in the promotion of sorting, recycling and reuse of
discarded electrical and electronic equipment. To nance the rubbish
collection and waste treatment, the government levies recycling charges
in certain cases (included in the price of this product).
EMBALLAGES
CARTONS ET PAPIER
À TRIER
All manuals and user guides at all-guides.com

3(7)
41Y742_743_745_03_R0_180618CWH_GB
Niko-Servodan A/S •Stenager 5 •DK-6400 Sønderborg • tel [phone] •[e-mail] •www.niko.dk
Fig. 1 Fig. 2
Fig. 3 - type no. 41-742 Fig. 4 - type no. 41-743 and 41-745
30 %
27 46,4
100
Ø100
100
88,5
90
Lens cover
Gasket for IP 54
18,2
45,9
117,3
Lens cover
User manual / EN
All manuals and user guides at all-guides.com

4(7)
41Y742_743_745_03_R0_180618CWH_GB
Niko-Servodan A/S •Stenager 5 •DK-6400 Sønderborg • tel [phone] •[e-mail] •www.niko.dk
Fig. 9 Walk test
Fig. 5 Fig. 6 - typenr. 41-742 og 41-743 Fig. 7 - typenr. 41-745
Ø24 m
Ø6 m
Ø17,5 m
240 m2
Ø24 m
452 m2
3 m
Ø4,4 m
15 m2
Ø6 m
28 m2
0,8 m
Ø3,4 m
9 m2
Ø13,5 m
140 m2
2,5 m
0,8 m
Ø20 m
300 m2
Ø5 m
19,5 m2
Ø24 m
Ø6 m
Ø17,5 m
240 m2
Ø24 m
452 m2
3 m
Ø4,4 m
15 m2
Ø6 m
28 m2
0,8 m
Ø3,4 m
9 m2
Ø13,5 m
140 m2
2,5 m
0,8 m
Ø20 m
300 m2
Ø5 m
19,5 m2
Fig. 8 Fig. 9
A
B
C
DA+
DA-
DA1DA1 DA2DA2
Presence and motion detector
DALI-2 BMS
H A dia. B dia. C dia. D dia. E dia. F dia.
4 meter ø0,2 ø2 ø3,7 ø6,5 ø11 ø16
5 meter ø0,25 ø2,5 ø4,7 ø8,5 ø14 ø20
6 meter ø0,3 ø3 ø5,5 ø10 ø17 ø24
7 meter ø0,4 ø3,5 ø7 ø11,5 ø20 ø28
8 meter ø0,5 ø4 ø7,5 ø14 ø22 ø32
F
E
D
C
B
A
H
Height
(H) 4 m 5 m 6 m 7 m 8 m
AØ0,20 Ø0,25 Ø0,30 Ø0,40 Ø0,50
BØ2,00 Ø2,50 Ø3,00 Ø3,50 Ø4,00
CØ3,70 Ø4,70 Ø5,50 Ø7,00 Ø7,50
DØ6,50 Ø8,50 Ø10,00 Ø11,50 Ø14,00
EØ11,00 Ø14,00 Ø17,00 Ø20,00 Ø22,00
FØ16,00 Ø20,00 Ø24,00 Ø28,00 Ø32,00
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
0.5 s
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
3
0.5 s
4
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
0.5 s
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
Detection segment A (red) Detection segment B (green) Detection segment C (blue)
User manual / EN
All manuals and user guides at all-guides.com

5(7)
41Y742_743_745_03_R0_180618CWH_GB
Niko-Servodan A/S •Stenager 5 •DK-6400 Sønderborg • tel [phone] •[e-mail] •www.niko.dk
Fig. 10.1 Check software version via IR remote control
Fig. 10.2 Check software version on the detector part
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
2
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
Number af ashes:
1 = Factor 10
2 = Factor 20
3 = Factor 30 etc.
R2 = Software version 2 R2 = Software version 2
Example:
1 x red ash and 1 x blue ash = Software version 11
Number af ashes:
1 = 1
2 = 2
3 = 3 etc.
AND
R7
R7
R7
R7
Type no.
41-743 and 41-745
Type no.
41-742
R2 R2
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
3e.g.. low
1 = Maximum
2 = High
3 = Low
4 = Minimum
On/Off= Off or On (1 ash = On, 2 ashes = Off)
0.5 s
4
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
Segments
12.1 Select sensitivity in segment A (red)
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
4 s
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
12.2 Select sensitivity in segment B (green)
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
Segments
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
4 s
0.5 s
3
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
4
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
e.g. Off
1 = Maksimum
2 = High
3 = Low
4 = Minimum
On/Off= Off or On (1 ash = On, 2 ashes = Off)
0.5 s
5
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
User manual / EN
All manuals and user guides at all-guides.com

6(7)
41Y742_743_745_03_R0_180618CWH_GB
Niko-Servodan A/S •Stenager 5 •DK-6400 Sønderborg • tel [phone] •[e-mail] •www.niko.dk
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
Segments
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
4 s
0.5 s
4
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
0.5 s
3
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
12.3 Select sensitivity in segment C (blue)
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
5
1 = Maksimum
2 = High
3 = Low
4 = Minimum
On/Off= Off or On (1 ash = On, 2 ashes = Off)
e.g.
minimum
0.5 s
6
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
13 Reset to factory settings
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
4 s
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
3
14.1 Status - Sensitivity in segment A (red)
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
Number of ashes:
1 = Maksimum
2 = High
3 = Low
4 = Minimum
5 = Off
0.5 s
3
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
Segment A
Number of ashes:
1 = Maksimum
2 = High
3 = Low
4 = Minimum
5 = Off
3Segment B
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
14.2 Status - Sensitivity in segment B (green)
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
User manual / EN
All manuals and user guides at all-guides.com
all-guides.com

7(7)
41Y742_743_745_03_R0_180618CWH_GB
Niko-Servodan A/S •Stenager 5 •DK-6400 Sønderborg • tel [phone] •[e-mail] •www.niko.dk
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
2
Number of ashes:
1 = Maksimum
2 = High
3 = Low
4 = Minimum
5 = Off
3Segment C
14.3 Status - Sensitivity in segment C (blue)
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞ min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
1
0.5 s
Lock/
unlock
Auto
800lx/
60min
100lx/
5min
200lx/
10min
300lx/
15min
600lx/
45min
1000lx/
∞ min
400lx/
30min
Time Lux Mode Fact.
set.
Dim+Dim-
On/O
2 31
8hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burnin
Status 2/3
zone
RF
4
Lock/
unlock
Auto
800 lx/
60 min
100 lx/
5 min
200 lx/
10 min
300 lx/
15 min
600 lx/
45 min
1000 lx/
∞min
400 lx/
30 min
Time Lux Mode Fac t.
set.
Dim +Dim -
On/O
2 31
8 hour Sens. Calib. Min./
O
Init. Next Test
On/O
Burn in
Status 2/3
zone
RF
4
Tabel 1: Memory bank 2
Address Description Default value
(factory)
Memory
type
0x00 Address and last accessible memory location 0x03 ROM
0x01 Indicator byte (manufacture denable) 0x00 any
0x02 Memory bank lock byte (<> 0x55 = read only else read/write) 0xFF RAM
0x03 PIR segement A sensitivity
0 = MAX, 1 = HIGH, 2 = LOW, 3 = MIN, 4 = OFF
0x01 NVM
0x04 PIR segement B sensitivity
0 = MAX, 1 = HIGH, 2 = LOW, 3 = MIN, 4 = OFF
0x01 NVM
0x05 PIR segement C sensitivity
0 = MAX, 1 = HIGH, 2 = LOW, 3 = MIN, 4 = OFF
0x01 NVM
0x06 LUX range
0 = NORMAL 0-1.023 Lux, 10-bit
1 = HIGH 0-10.360 Lux, 14-bit
0x00 NVM
User manual / EN
All manuals and user guides at all-guides.com