NSK CARE 3 PLUS User manual

correct handpiece maintenance - everytime
AUTOMATIC HANDPIECE CLEANING & LUBRICATION SYSTEM
Powerful Partners®
CARE 3 PLUS FROM NSK
Specifications are subject to change without notice. 09.02.05.HGPR-D293E Ver.5
Care3 Plus Adaptors
Spare Parts
Low Speed Handpieces
Low speed handpieces incorporate gearing systems which require extra solution penetration.
The NSK rotation system guarantees optimum oil delivery to the internal components of all low
speed handpieces, while particles in the coolant water and air channels are removed by the
cleaning solution.
High Speed Handpieces
The critical turbine component, plus all air and water channels of high speed handpieces are
thoroughly cleaned and lubricated.
Oil & Air
Oil & Air
SELECT Two types of units are available.
C1 Type
Rotation Port Standard Port Standard Port
C2 Type
Care3 Plus Complete Pack
Rotation Port Rotation Port Standard Port
Dual Rotation Ports
+ Single Standard Port
Contents
• Care3 Plus unit • Power cord with L-shaped plug
• Maintenance oil (1 litter)
• Oil replenish funnel with filter • Mist filter set
• Air tube • Air filter
In full tank about 3,500 handpieces (S mode)are
cleaned and lubricated.
*Connects only to Midwest 4-hole type
*Air piping is necessary (3.5-6 kgf/cm2)
• Power Supply : AC 120V or 230V 50/60Hz
•
Air Pressure : 0.35-0.6 MPa (3.5-6 kgf/cm
2
)
• Weight : 7.1 kg (C1 type), 7.2 kg (C2 type)
• Dimension : W280 x D275 x H360 mm
• Solution Tank Capacity : 350 mL
*For Care3 Plus only. Not applicable with Care3.
Check with the dealer for the adaptors to mount other manufactures’ handpieces.
Specifications
Rotational maintenance system guarantees
thorough cleaning and lubrication of each handpiece.
Single Rotation Port
+ Dual Standard Ports
Single Rotation Port
+ Dual Standard Ports
Dual Rotation Ports
+ Single Standard Port
KaVo
®
and MULTIflex LUX
®
are registered trademarks of Kaltenbach & Voigt GmbH & Co., Germany.
Sirona
®
is a registered trademark of Sirona Dental Systems GmbH, Germany.
W&H
®
and Roto Quick
®
are registered trademarks of W&H Dentalwerk Bürmoos GmbH, Austria.
Bien-Air
®
and Unifix
®
are registered trademarks of Bien-Air Dental S.A., Switzerland.
Care3 Plus C1 Type (120V)
Care3 Plus C1 Type (230V)
Y141-202
Y141-204
MODEL ORDER CODE
Care3 Plus C2 Type (120V)
Care3 Plus C2 Type (230V)
Y141-203
Y141-205
E-Type Adaptor * Z280-035
MODEL ORDER CODE
Care3 Plus ADAPTORS
For all brands Low Speed
Handpieces
PTL Adaptor Z257-010
For High Speed Handpieces
for PTL-CL-4HV-T Coupling
QD Adaptor Z257-011
For MACH-QD & CH-QD
High Speed Handpieces
B2/M4 Adaptor T904
For Borden 2-hole High Speed
Handpieces
KV Adaptor Z257-020
For KaVo®High Speed
Handpieces for MULTIflex LUX®
Coupling
SR Adaptor Z257-023
MODEL ORDER CODE
Care3 Plus ADAPTORS
For Sirona®High Speed
Handpieces for Quick Coupling
WH Adaptor Z257-021
For W&H®High Speed
Handpieces for Roto Quick®
Coupling
BA Adaptor* Z280-022
For Bien-Air®High Speed
Handpieces for Unifix®
Coupling
F-Type Adaptor* Z280-042
For ENDO-MATE TC, DT/
TASKAL Wizard Heads
Oil Absorber Sheet
(Pack of 20) Y900-186
MODEL ORDER CODE
PRODUCTS
Air Filter U508-352
Air Filter Element U508-353
Fuse (120V)
Fuse (230V)
U433-222
U433-223
Maintenance Oil
(1 Bottle) Z016-117
MODEL ORDER CODE
PRODUCTS
Maintenance Oil Set
(Pack of 6 Bottles) Y900-138
Mist Filter Set
(pack of 12 piecese) Y900-159
Oil Replenish Funnel
with Filter U433-090
(1 litter)
Air Tube
(3m) U508-038

Automatic Care3 Plus Is the Key to Handpiece Durability
Correct maintenance performed at regular intervals is a key to high performance and longer
life of your handpieces. NSK designed easy-to-use Care3 Plus to facilitate handpiece
maintenance at your office. Care3 Plus automatically cleans and lubricates up to 3
handpieces at one time with a touch of button. Both high speed and low speed handpieces
are processed thoroughly in a single 2-minute operation cycle.
Air Activation
Air supply is activated by the “Air” key.
This enables the operator to flush out
all residual solution.
Original Air Filter
Clean air supply is a must for effective
handpiece maintenance. NSK Care3
Plus comes with a highly efficient air
filter that can be exchanged and
installed easily wherever you desire.
Virtually No Mist
Spray mist is generally absorbed within
the Care3 Plus unit by disposable mist
filtration system. Filter sponges are easily
exchanged. (Comes in a pack of 12)
The Oil Level Indicator
Oil level indicator is ideally located at
the front panel of Care3 Plus unit to
clearly show amount of oil in the tank.
Power Cord with
L-Shaped Plug
The power cord with L-shaped
plug allows the Care3 Plus to be
installed in virtually any surgery
location.
Easy to Clean
With pulling the detachment pin, the
front cover can be completely
removed for easy cleaning.
Accommodates NSK and Other
Brands’ Handpieces
NSK and all other brands of low speed handpieces
connect directly to the coupling supplied. NSK high
speed handpieces require the PTL adaptor.
Adaptors are available for direct connection of most
other brands of high speed handpieces.
Solution Tank
The solution tank has capacity for maintaining 3,500
handpieces (S Mode) before a refill is required. To refill
the tank, simply unscrew the cap on top of the unit and
pour in new Care3 Plus solution.
End-of-Cycle Indicator
An audible indicator alerts the operator when the cycle is completed.
Simple to Operate
1
Open the door and attach up to 3 handpieces
to the Care3 Plus couplings.
2
After connecting the handpieces, close the
door. Care3 Plus will not operate if the door
is not properly closed.
3
Select the S, L, or E mode relevant to each
handpiece connection location.
4
Press the start key. In less than two
minutes, all handpieces are correctly
cleaned and lubricated.
(When one long mode and two short modes are selected.)
S
L
E
:S mode (Approx. 35 seconds)
For high speed handpieces
:L mode (Approx. 45 seconds)
For low speed handpieces
:E mode (Approx. 50 seconds)
For speed reduction and speed increasing
handpieces, etc.
Care3 Plus control panel is easy to understand and
simple to operate.
Error Indicator
Power Indicator
S: Short Cycle for High Speed Handpieces
L: Long Cycle for Low Speed Handpieces
E: Extra Long Cycle for Speed Reduction Handpieces, etc.
Cycle Selection
Start KeyAir Key
Fast, user friendly, fully automatic, and economical.
*The figures in brackets indicate the clean-lubricate-flush
time for a handpiece.
Convenient Memory Function
Care3 Plus memory system stores and instantly recalls the last operational setting when the
power switch is turned on. This memory function eliminates the need to repeatedly preset
handpiece maintenance.