
OFYR®MANUAL - RECHAUD
1
2
3
5
4
OFYR Rechaud
PRODUCT DESCRIPTION
The OFYR Rechaud consists of a coated steel stove, a grid, a steel plate and a thermal beech wooden board to
protect your surface from the Rechauds heath. The stove has 3 legs with a length of about 2cm with underneath
silicon caps. In this way the stove does “oat” above the wooden board causing the hot air from the stove to circulate
between the stove and the wooden board. It is thereby critical that the silicon caps will not be removed from the legs
of the stove because otherwise the wooden board might be damaged when the stove is warm. Under the wooden
board there are 5 at silicon caps that prevent the wooden board to touch the surface on which it is placed and
that stabilize the stove at the same time. The at silicon caps should always be in place because otherwise the hot
wooden board might damage the surface on which the board is placed.
HOW TO OPERATE YOUR RECHAUD
First clean the plate with a degreasing detergent. Then Place the plate of the Rechaud on the cooking plate of your
OFYR cooking unit to warm it up. Then add a layer of maximum 3cm charcoal from the cone of the OFYR cooking unit
on the grid in the stove of the Rechaud. Replace the Rechauds plate on the stove and keep your food warm on the
Rechaud. In this way, the Rechauds cooking plate will reach a temperature of 100-150˚C which is warm enough to
keep the food warm for 1/2-1 hour. When carrying the hot Rechaud always wear heat resistant gloves. When walking
around with the hot Rechaud always keep people at sucient distance because the Rechaud and the charcoal inside
are very hot. It is important that you regularly treat the cooking plate with oil. The cooking plate is made of steel and
will corrode if oil is not baked into it. Once the oil has properly been baked in, only minor corrosion will develop.
Any corrosion that does develop can be removed using steel wool.
OFYR®MANUAL RECHAUD
THANK YOU SO MUCH FOR BUYING AN OFYR®PRODUCT. THIS MANUAL CONTAINS SETUP INSTRUCTIONS,
WARRANTY CONDITIONS, AND ADDITIONAL INFORMATION ABOUT OUR RECHAUD 30 AND RECHAUD 40.
RECHAUD 30 RECHAUD 40
OFYR Rechaud
RECHAUD 30 RECHAUD 40
1. PLATE
Dimensions Ø 29,6 cm Ø 39,6 cm
Weight 1.800 g 3.200 g
2. GRID
Dimensions Ø 27 cm Ø 37 cm
Weight 160 g 385 g
3. STOVE
Dimensions Ø 30 cm Ø 40 cm
Weight 2.500 g 4.200 g
4. HEAT RESISTANT SILLICONE FEET
5. THERMAL BEECH WOODEN BOARD
Dimensions Ø 35 cm Ø 45 cm
Weight 1.022 g 1.740 g