Oki ES3640eMFP User manual

Fuser
Installation Instructions
Caution! The fuser is very HOT after the
printer has been printing. Let the
printer cool down at least 10 minutes
before attempting to replace it.
To replace the fuser:
1. Turn off the printer.
Note: If the hard disk drive is installed in your
printer, press the SHUTDOWN/RESTART
button for several seconds before
turning the printer off.
2. Open the top cover.
3. Pull the fuser lock lever as shown to unlock the
fuser.
4. Grasp the fuser handle and lift the fuser out of
the printer. Dispose of it in accordance with local
regulations.
© 2005 Oki Data Americas, Inc. 58371802

5. Unpack the new fuser and lower it into the
printer.
6. Push the lock lever as shown to lock the fuser in
place.
7. Close the top cover.
8. Turn the printer on.
Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054
WWW.OKIPRINTINGSOLUTIONS.COM/US