Oki 42158411 User manual

Memory DIMM
Installation Instructions
c51_03_dimm.jpg
For DIMM Part Numbers
64 MB: 70043001
128 MB: 70043101
256 MB: 70043201
59382901, Am Eng

Copyright Information
© 2005 by Oki Data Americas, Inc. All rights reserved.
Document Information
Memory DIMM Installation Instructions
P/N 59382901
October, 2005
Disclaimer
Every effort has been made to ensure that the information in this document is
complete, accurate, and up-to-date. The manufacturer assumes no responsibility for
the results of errors beyond its control. The manufacturer also cannot guarantee that
changes in software and equipment made by other manufacturers and referred to in
this guide will not affect the applicability of the information in it. Mention of software
products manufactured by other companies does not necessarily constitute
endorsement by the manufacturer .
For the latest product information, printer drivers, manuals, special offers, etc., go to
www.okiprintingsolutions.com
Trademark Information
OKI is a registered trademark of Oki Electric Industry Company, Ltd.
Macintosh is a trademark of Apple Computer, Inc., registered in the U.S. and other
countries.
Windows and Windows NT are either registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
Other product names and brand names are registered trademarks or trademarks of
their proprietors.

3
Installation
Caution!
To avoid damage by static electricity and rough handling. Keep the
board in its packaging until you're ready to install it
1. Turn off the printer (1).
2. Unplug the power cord (2).
3. Detach the interface cable from the back of the printer (3).
C53_Off_Unplug_USB.jpg

4
4. Open the top cover.
c53_02a_opencvr.jpg
5. Loosen the thumbscrew holding the printer side cover in place.
c51_07_unscrewpanel.jpg

5
6. Open the front cover.
c5x_016.jpg
7. Lift up on the ends. Remove the side panel from the printer.
c5x_017.jpg

6
8. Locate the DIMM socket.
c51_06_sidenopanel.jpg and c53_107_dimmsocket.jpg
9. Push out the lock tabs at either end of the DIMM socket.
c51_04a_dimmtabs.jpg and c53_107a_dimmsocket.jpg

7
Caution!
To avoid damage, ground yourself (touch metal) before handling
DIMMs.
10. Remove the DIMM from its shipping package.
11. Position the DIMM as shown.
c51_03_dimm.jpg

8
12. Insert the DIMM in the socket.
Press the DIMM in firmly, until you feel the tabs snap to lock it in
place.
Note: You may need to push the tabs in manually to secure the
DIMM.
c53_109a_dimminsert.jpg

9
13. Place the side panel on the printer. Use the thumbscrew to
secure the panel.
c51_07_unscrewpanel.jpg
14. Close the front cover.
c53_58a_frcvropen.jpg

10
15. Close the top cover.
c53_45_latchcvr.jpg
16. Attach the interface cable.
17. Plug in the power cord.
18. Turn on the printer.