Oki C5300n User manual

Hard Disk Drive
Installation Instructions
HDD PART NUMBER
70043501

Every effort has been made to ensure that the
information in this document is complete,
accurate, and up-to-date. Oki Data assumes no
responsibility for the results of errors beyond its
control. Oki Data also cannot guarantee that
changes in software and equipment made by
other manufacturers and referred to in this guide
will not affect the applicability of the information
in it. Mention of software products manufactured
by other companies does not necessarily
constitute endorsement by Oki Data.
© 2003 by Oki Data Americas, Inc. All rights
reserved.
Written and produced by the Oki Data Training
& Publications Department. Please address any
comments on this publication:
by mail to:
Training & Publications Dept.
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
or by email to: [email protected]
For the latest product information, printer
drivers, manuals, special offers, etc., go to
http://my.okidata.com.

1
Prepare the Printer
1. Turn off the printer and unplug the power
cord.
2. Detach the interface cable from the back of the
printer.
3. Open the top cover.

2
4. Loosen the thumbscrew holding the printer
side cover in place.
5. Open the front cover.

3
6. Remove the side panel from the printer.