Olympus EVIS EUS EU-ME2 Premier Plus User manual

CAUTION: This quick reference guide is only a summary of the EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow the
EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 Premier Plus purchase.
EU-ME2 Premier Plus
Quick Reference Guide - Advanced Modes
Tissue Harmonic Echo (THE) Mode
1
Select the MAIN MENU tab on the LCD touch panel.
2
Touch any one of the three THE buttons to change modes (OFF, THE-P or THE-R).
3
When the THE function is on, the frequency indicates THE-P or THE-R.
* THE-P: Penetration priority mode. This mode increases the penetration of the ultrasound waves, allowing for better visualization of objects from near to far
* THE-R: Resolution priority mode. By enhancing the resolution of the image, this mode makes it easier to observe objects in the near field.
* The THE-P or THE-R button is selected on the LCD touch panel when the THE function is on.
* The ENHANCE function is automatically disabled when the THE function is on. An enhancement-coordinating setting can be selected through the menu.

2
CAUTION: This quick reference guide is only a summary of the EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow the
EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 Premier Plus purchase.
EU-ME2 Premier Plus
Quick Reference Guide - Advanced Modes
Elastography (ELST) Mode
1
Visualize the target for stiffness evaluation in the B mode image.
* Note: Make sure the target is displayed right below the ultrasound transducer.
2
Select the MAIN MENU tab on the LCD touch panel.
3
Press the ELST button and the mode is switched to the Elastography mode.
* The LCD touch panel automatically switches from MAIN MENU to ELST MAIN.
4
Adjust the size and location of the ROI (region of interest) so the target is within the ROI.
* Adjust the ROI to include the entire target lesion. The ROI should not include other objects such as other organs, ducts or vessels.

3
CAUTION: This quick reference guide is only a summary of the EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow the
EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 Premier Plus purchase.
EU-ME2 Premier Plus
Quick Reference Guide - Advanced Modes
Adjustment by the Trackball
Adjustment by the Touch Panel
1
Using the trackball, adjust the ROI position.
2
Press the SET button and use the trackball to adjust the ROI size.
3
To readjust the ROI position, press the SET key again.
1
Select LOCATION or SIZE on the touch panel.
2
Use the ROI buttons to, adjust the ROI size and position.

4
CAUTION: This quick reference guide is only a summary of the EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow the
EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 Premier Plus purchase.
EU-ME2 Premier Plus
Quick Reference Guide - Advanced Modes
Strain Adjustment
1
Press the STRAIN ADJUST buttons to adjust the sensitivity of the ELST mode image.
Strain Graph Display
1
Select the STRAIN GRAPH tab and the STRAIN GRAPH ADJUSTMENT menu appears.
2
By pressing the DISPLAY button, the Strain Graph can be displayed or hidden.
3
By pressing the LOCATION button, the location of the Strain Graph can be changed.
* There are 2 options for the location of the Strain Graph: in the field of view or under the sector scan.

5
CAUTION: This quick reference guide is only a summary of the EU-ME2 Premier Plus Instructions for Use. For detailed operating instructions, be sure to follow the
EU-ME2 Premier Plus Instruction Manual included with your EU-ME2 Premier Plus purchase.
EU-ME2 Premier Plus
Quick Reference Guide - Advanced Modes
Olympus is a registered trademark of Olympus Corporation, Olympus America Inc., and/or their affiliates.
3500 Corporate Parkway, PO Box 610, Center Valley, PA 18034
For more information, contact your Olympus
sales representative, or call 800-848-9024.
www.medical.olympusamerica.com
©2015 Olympus America Inc. All rights reserved.
Printed in the USA OAIGI0315QRG15615
Strain Graph Adjustment
1
The SECTOR buttons adjust the width (on the time axis) of the Strain Graph to be referenced in AUTO CINE REVIEW and
FRAME AVERAGE.
2
The FRAME AVERAGE button displays the average elasticity image of the time length set with the SECTOR buttons.
* If the FRAME AVERAGE button is pressed again, the length of time is reset.
3
The AUTO CINE REVIEW button repeatedly displays the cine memory images in the time length set with the SECTOR buttons.
* If the AUTO CINE REVIEW button is pressed again, the cine memory stops.