Omron E3X-DA-SE-S User manual

New Models That Eliminate Worries about
Digital Sensor Setting Mistakes
■ One-key, one-operation concept for easy operation.
■ Threshold value setting with direct operation performed
while monitoring the detection status.
■ Lock function to prevent operating errors through
unintentional operation.
Technology
Digital Fiber Sensors
E3X-DA@SE-S
Easy and Reliable Digital Sensors
with the Same Detection Performance
as Previous Models
Limited-function Models: Simple and Easy
Some people think that digital sensors with their advanced performance
are difficult to use, so we went back to the drawing board to rethink per-
formance and functions.
Without changing basic functions like APC and digital displays, OMRON
created a Digital Fiber Sensor that can be used as easily as the familiar
sensors with sensitivity adjustment knobs.
OMRON's many years of accumulated sensing technology and high-
speed digital processing techniques merge to meet onsite needs.
Our goal is high-performance sensing that provides easy, reliable
application.
Incident level Threshold value
KEY LOCK Switch
OPERATION MODE Selector
Threshold adjustment
Threshold Teaching
With/Without Workpiece: Teaching is performed in two states.
Automatic: Teaching is performed by passing a workpiece.
UP/DOWN Key
TEACH Key
The Engine for High-performance
Sensing
Reliable Detection of Small Workpieces
12-bit A/D converter (4,000 resolution)
Sensing Engine
Consistent Emitter Power
Auto Power Control (APC)
Easy-to-read Displays Even at a Distance
Intelligent Display
Fine Sensing
High Performance
Easy Operation
The Simplest Digital Fiber Sensor
One Key, One Operation
Simple and easy direct operation
N E W

Ordering Information
Ratings and Specifications
NPN output PNP output
E3X-DA41SE-S
E3X-DA41SE-S
E3X-DA8SE-S
E3X-DA8SE-S
E3X-DA11SE-S
E3X-DA11SE-S
E3X-DA6SE-S
E3X-DA6SE-S
Pre-wired Models
Connector Models
Type Appearance Model
Item
Type
Model Digital Fiber Sensor
NPN output
PNP output
Light source (wavelength)
Power supply voltage
Power consumption
Control output
Protection circuits
Response time
Sensitivity setting
Functions
Auto power
control
Mutual interference
prevention
Indicators
Digital displays
Red LED (650 nm)
12 to 24 VDC ±10%, ripple (p-p): 10% max.
960 mW max. (Power supply: 24 V, Current consumption: 40 mA max.)
Load power supply: 26.4 VDC max., Open-collector output, Load current: 50 mA max. (Residual voltage: 1 V max.)
Power supply reverse polarity protection, Output short-circuit protection
Operate or Reset: 1 ms
Teaching or manual adjustment
High-speed control method for emission current
Optical communications sync, possible for up to 10 Units
Operation indicator (orange)
Twin digital displays (incident level + threshold)
Basic performance is the same as the E3X-DA-S Series. Refer to the E3X-DA-S Datasheet (E336) for details.Note:
Authorized Distributor:
Note: Specifications subject to change without notice. Cat. No. E357-E1-01
Printed in Japan
0305-2M (0305) (B)
Note: Do not use this document to operate the Unit.
OMRON Corporation
Industrial Automation Company
Application Sensors Division
Sensing Devices and Components Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: [phone]/Fax: [phone]
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit,
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: [phone]/Fax: [phone]
OMRON ELECTRONICS LLC
1 East Commerce Drive, Schaumburg,
IL 60173 U.S.A.
Tel: [phone]/Fax: [phone]
OMRON ASIA PACIFIC PTE. LTD.
83 Clemenceau Avenue,
#11-01, UE Square,
239920 Singapore
Tel: [phone]/Fax: [phone]
OMRON CHINA CO., LTD. BEIJING OFFICE
Room 1028, Office Building,
Beijing Capital Times Square,
No. 88 West Chang'an Road,
Beijing, 100031 China
Tel: [phone]/Fax: [phone]
This document provides information mainly for selecting suitable models.
Please read the Instruction Sheet carefully for information that the user must
understand and accept before purchase, including information on warranty,
limitations of liability, and precautions.